How to Make 3D Lettering in Procreate
StyleFrame Team7 min read
To make 3D lettering in Procreate, build the letter on a flat layer, duplicate it, shift the copy diagonally in a darker color, and connect the two shapes with straight lines to form the extrusion. Then add shading, a drop shadow, and highlights on separate layers. This is a drawn illusion of depth, and it works best when you plan light direction and layer structure first. If you need real geometry that rotates and catches light, build the letters in Cinema 4D, Blender, or After Effects and use Procreate for texture and style.
What Procreate Can and Can't Do for 3D Lettering
The techniques below don't produce a mesh with bevels, a camera, or real lighting. Every "3D" letter you make this way is a 2D illustration that reads as dimensional because of offset shapes, value shifts, shadows, and highlights.
That's a feature for stylized work. You get complete control over how a letter looks, from chunky retro blocks to glossy candy forms, without fighting a render engine. The tradeoff is that the depth is baked in. Anything that needs to turn or change perspective belongs in a 3D package.
Choose Procreate when you want illustrated, handmade character: title cards, social loops, poster-style frames, or reference art for a motion piece.
Set Up the Canvas First
A few decisions up front save rework:
- Canvas size: Work larger than your delivery size. A canvas around 2300 × 3000 px is a workable starting point for a single-letter piece, and you'll want more headroom if the art will be scaled in a comp.
- Color profile: Use RGB for anything headed to video or screen. Set DPI according to whether you also plan to print.
- Letterform: Pick a heavy serif or a clean sans with simple curves. Thin, ornate scripts make the extrusion corners messy. You can also draw your own letters, which gives you more control over the thickness.
- Palette: Pick four or five tones of one hue for the body (lightest face, mid, dark side, deepest shadow), plus a near-white for highlights and a dark tone for the cast shadow.
- Light direction: Decide now. If light comes from the upper left, extrusion and shadow go to the lower right, and every highlight sits on upper-left edges.
Method 1: Offset-and-Connect Block Letters
This is the most reliable way to get classic extruded type.
Step 1: Create and rasterize the face
Tap Actions (the wrench), choose Add, then Add Text, and type your letter or word. Set the font, then rasterize the text layer so you can paint on it. Use your second-lightest body tone for the face.
Step 2: Clean the edge
Antialiased edges can leave halos when you recolor. If you see a fringe, duplicate the layer and soften it slightly with a small Gaussian Blur, then merge duplicates until the edge is solid. Keep the top face layer untouched.
Step 3: Duplicate and offset for depth
Duplicate the face layer and select the lower copy. Use ColorDrop with threshold at 100% to fill it with your darkest body tone. Then open Transform and nudge the copy diagonally toward the lower right. The distance you move it is the depth of the extrusion: a small shift reads as a thin slab, a large one as a deep block.
Step 4: Connect the corners
The offset alone leaves a gap between face and back. On a new layer, use a Monoline brush with Streamline turned on and draw straight lines joining matching corners of the face and the offset copy. Use the dark tone, not a contrasting color. Then fill the enclosed regions between those lines and the letter shapes. Merge this layer into the dark copy so you have a clean face layer and a clean side layer.
For rounded letters, the connecting lines run tangent to the curve at the points where the silhouette changes. Check the outline against the original shape before filling.
Step 5: Shade the sides
Clip a new layer to the side layer and paint a lighter tone on edges that face the light, with a darker tone on edges facing away. Even a two-value split helps the form read at small sizes.
Step 6: Add the cast shadow
Duplicate the face and side layers, merge the duplicates, and fill with your shadow color. Put this layer at the bottom and offset or distort it to suggest the ground plane. Blur it slightly, and lower its opacity so it doesn't look like a hard sticker.
Step 7: Highlights
Add a clipped layer above the face. Paint thin highlights along edges that face the light using white or a very light tint of the body color, then add a few small specular points. Keep them sparse. Over-highlighting flattens the form.
Method 2: Guideline-Built Lettering
If you want more hand-drawn character than a font offers, build the letters from boxes. Sketch each letter as a simple block with consistent thickness, set vanishing directions with guide lines, then trace the final shapes over them.
This approach keeps stroke width uniform, which is the part most people get wrong. Once the structure is locked, add texture brushes for grain, and a rim-light brush for edge glow. Compose the piece deliberately: spacing, overlap, and background elements matter as much as the extrusion.
Method 3: Glossy and Volumetric Looks
Materials like gummy, glass, or balloon text rely on layered shading rather than hard extrusion. A typical stack, from bottom to top:
- Drop shadow layer
- Base letter fill
- Base shading layer, clipped to the letter
- Volume layers in darker and more saturated tones
- Internal details such as air bubbles with a soft color glow beneath them
- White reflections, blurred slightly
- Specular highlights, set to a lighter blend mode such as Add
- Overlay layers for extra dimension
- Final polish: a glow made from a copy of the canvas blurred and blended, a hue/saturation pass, and subtle chromatic aberration
Clipping masks do most of the work here, because every shading layer stays inside the letter shape and remains editable. Name your layers as you go. A file with this many layers is only manageable if you can find the highlight pass later.
Common Problems
- Jagged or halo edges: Work at a higher resolution and avoid scaling raster layers up after painting.
- Extrusion looks wobbly: Use Streamline and QuickShape for the connecting lines, and zoom in to check that corners meet exactly.
- Letters look flat: Check that your value order is consistent: face lightest, lit side mid, shadow side darkest.
- Inconsistent light: If the cast shadow, side shading, and highlights point in different directions, the illusion breaks immediately.
Moving Procreate Lettering Into a Motion Pipeline
For motion work, the layer structure matters more than the finished flat image. Export a layered PSD, or export key layers separately: face, sides, shadow, highlights. In After Effects, you can then:
- Animate the face and shadow independently for a parallax feel
- Use the highlight layer with an Add or Screen blend and animate its position for a light sweep
- Rebuild the extrusion with real 3D layers if you want true camera movement, using the Procreate art as a texture or reference
- Add glow, grain, and color grading in the comp instead of baking them in
A drawn extrusion will not hold up if the camera moves around it, so the dependable moves are push-ins, slight parallax, and light sweeps. For full rotation, model the type in Cinema 4D or Blender and use your Procreate work as a surface texture or style reference.
Where Styleframe Fits
Once you have a strong lettering frame, the next question is how to get it moving or into 3D without redrawing it from scratch. You may want to explore AI video and motion tools such as that can work from your own reference artwork. Check the tool's current features and export options to see whether they fit your workflow. As always with generative tools, review the results frame by frame: fine letter shapes and legible type may need a cleanup pass in your comp.
Quick Checklist
- Choose your light direction before drawing anything
- Work large, in RGB, with a limited tonal palette
- Keep face, sides, shadow, and highlights on separate layers
- Use clipping masks for shading so edits stay contained
- Keep highlights sparse and consistent
- Export layers for animation, and use a real 3D package when the camera needs to move around the letters
Procreate gives you speed and a handmade look. Treat it as the art-direction stage of your lettering, then take the layers into your motion pipeline for the movement.