How to Make 3D in Procreate
StyleFrame Team8 min read
Procreate doesn't model 3D from scratch. You make 3D there by importing an OBJ or USDZ model that has a UV map and painting textures directly onto it, or by faking depth in a flat illustration with shading, Liquify, and blur. The first route gives you a real paintable 3D object that you can light, export, and view in AR. The second gives you a dimensional-looking 2D image. Which one you want depends on whether you need geometry you can rotate or just a look.
The Two Ways to Get 3D in Procreate
For motion work, the first route is closer to a real asset pipeline. The second is faster when you only need a single frame.
Method 1: Paint Directly on a 3D Model
Step 1: Get a model into Procreate
Procreate supports OBJ and USDZ files. The easiest starting point is the model pack that came with the 3D painting update, which you can download from Actions → Help → What's New. Open any model from your Gallery and 3D painting activates automatically.
You can also import your own. Marketplaces such as TurboSquid and CG Trader commonly offer OBJ files. If a model is in another format, Blender or Cinema 4D can convert it.
Step 2: Make sure the model has usable UVs
This is where most people get stuck. A UV map is the flattened 2D version of your model's surface, and it's what you actually paint on. Without one, Procreate won't let you paint. If you import a model without UVs, you'll see an error saying the model has missing UVs and is unsupported.
A UV map that imports isn't necessarily a good one. Downloaded models weren't always built to be painted, so you may find gaps, missing parts, or overlapping islands. Overlapping UVs are especially nasty because paint on one part of the model shows up on another.
Step 3: Paint, select meshes, and use gestures
Painting on a 3D model works like painting on a regular canvas, using an Apple Pencil. A few controls differ from 2D:
- Rotate: drag with one finger.
- Move and zoom: drag with two fingers and pinch.
- Select a mesh: tap an isolated part of the object. It flashes blue to show it's active.
If paint doesn't appear, tap the area until it flashes blue, then paint again. If you don't have a Pencil, enable finger painting under Actions → Prefs → Gesture Controls → General → Enable 3D painting with finger. You'll then hold the Modify button on the brush slider to rotate.
Step 4: Work in layers
Imported models open with at least one Base Layer. Painting on it works, but it changes the original texture. A safer approach is to create your own layers above it, which keeps the base untouched and lets you edit non-destructively. Each model is organized into texture sets containing meshes and layers, and you can break layers down into individual materials to work separately on color, metallics, and roughness.
Step 5: Use the 3D Actions
Open Actions → 3D to reach a few useful toggles:
- Edit 2D texture unwraps the object into its flat texture map. This is a good place to block in large base colors or fix details, and painting there behaves like normal 2D painting. Toggle it off to return to the 3D view.
- Paint through mesh makes strokes ignore unselected meshes. Use it when one part of the model blocks the area you need to reach.
- Edit Lighting opens the Lighting Studio, where you can add lights, adjust hue, saturation, and intensity, and set an environment.
- View in AR places the object on a detected surface through your iPad camera. Note that AR uses ambient light from the camera, not your Lighting Studio setup.
Step 6: Export
Procreate can share 3D work as a model, an image, or a video in several formats. For a pipeline, exporting the textured model is usually the most useful option, since you can bring it into Blender or Cinema 4D for proper shading and rendering.
Preparing Models From Other 3D Software
If you build in a DCC app, a few prep steps save headaches.
From Cinema 4D: bake generators and deformers down to a polygonal mesh first. Subdivision surfaces and symmetry objects need to be made editable, and leftover parent nulls should be removed so only the resulting mesh remains. Then fix your UVs. Cinema 4D's automatic UV algorithm handles most cases and removes texture stretching, though you can unwrap manually if the result isn't clean. A test grid texture is a handy way to spot stretching, flipped orientation, and overlapping polygons.
From Blender: the same logic applies. Apply modifiers, unwrap the mesh, check for overlaps, and export as OBJ.
From a sculpting app like Nomad Sculpt: run a UV auto-unwrap before exporting. In the Nomad workflow, that means unwrapping each object into an atlas, then exporting as OBJ and sending it to Procreate.
A quick pre-flight checklist:
- Mesh is baked down, with no live generators or deformers.
- Every object has a UV map.
- No overlapping UV islands.
- Texture density is reasonably even across the model.
- File is saved as OBJ or USDZ.
Method 2: Fake a 3D Look in a Flat Illustration
If you don't need a real model, you can build depth with 2D tricks. These work well for stylized frames, title cards, and graphic elements.
A simple example is the embossed wave effect on a checkerboard pattern:
- Draw a wavy line on a new layer above your artwork.
- On another layer, outline that line in white with a little spacing.
- Select the pattern layer and use Adjustments → Liquify → Push with a large brush, following the wave path so the pattern bends along it.
- Merge the line layers.
- Apply Adjustments → Gaussian Blur to the merged line layer. The softened edges create a glow that makes the wave look raised.
You can extend the same idea with other methods: duplicate and offset a shape for a fake extrusion, add a darker side plane, layer highlights and core shadows, or stack two distortions. These are illustration techniques rather than real geometry, so they hold up for a single angle but not for rotation.
Where Procreate's 3D Stops
Knowing the limits helps you decide when to stay in Procreate and when to move on:
- It's a texture painting tool, not a modeler. You can't sculpt or edit geometry.
- It depends entirely on good UVs.
- Lighting Studio is simple, so it's meant for previewing rather than final rendering.
- Output is aimed at stills, simple video, and AR, not production-grade composites.
Treat Procreate as the place where textures and looks get made, then send the results to your main 3D or compositing tools.
Using Procreate 3D Work in a Motion Pipeline
For After Effects, Premiere Pro, Cinema 4D, Blender, or Nuke users, Procreate is typically one stage in a longer chain. A reasonable flow looks like this:
- Build or buy the base mesh in Blender or Cinema 4D, and unwrap it.
- Paint textures in Procreate, using separate layers for color, metallics, and roughness.
- Export the textured model and bring it back into your 3D app for lighting and rendering.
- Composite the render in After Effects or Nuke.
There's also a case where you don't have a model at all, just a Procreate illustration, and you need it to move or turn. Rebuilding it as geometry may be more work than the shot deserves.
Troubleshooting Common Problems
"Model has missing UVs" error on import. Unwrap the model in your 3D app and re-export. Most apps have an automatic unwrap that's good enough for a first pass.
Paint doesn't show up. Tap the target area until it flashes blue to select that mesh, then try again.
Paint appears in the wrong place. Check for overlapping UV islands. Fix them in the UV editor and re-import.
Texture looks stretched. Your UV islands are scaled unevenly. Re-unwrap, or rescale islands to a consistent texel density.
A part of the model blocks the area you need. Turn on Paint through mesh, or select just the mesh you want to work on.
Colors look different in AR. AR uses the iPad camera's ambient lighting, not your Lighting Studio setup. Judge lighting in the studio and use AR for placement and scale.
Which Approach Should You Use?
If you need a real object you can rotate and re-render, paint on a UV-mapped model in Procreate and finish it in your 3D app. If you need a single dimensional-looking frame, use Liquify, blur, and layered shading. And if you have finished 2D art that needs to move through space, consider generating the motion from your artwork rather than rebuilding it, then composite the sequence as you normally would.