How to Make 3D Effect in Procreate
StyleFrame Team7 min read
To make a 3D effect in Procreate, you can either fake depth on a flat canvas or paint on a real 3D model. The faking method stacks offset duplicates of a shape to build an extrusion, then adds highlights, shadows, and blur to sell the volume. The real-3D method imports an OBJ or USDZ model that has UV maps, so you can paint its texture, adjust its lighting, and preview it in AR.
Procreate is not a 3D modeling or rendering tool, so every result falls into one of those two categories. Knowing which one you need saves time, especially if the artwork is headed into a motion pipeline afterward.
Method 1: Extrude a Shape with Duplicated Layers
This is the most common approach for 3D lettering, logos, and icons. You are building a fake extrusion out of many slightly offset copies.
- Create the face of the shape. Add text from Actions → Add → Add text, or draw the shape. Rasterize it from the layer menu so you can edit it freely.
- Duplicate and darken the bottom copy. Duplicate the layer, select the lower one, and fill it with a darker shade of the same hue. Use ColorDrop with threshold at 100% for a clean fill.
- Offset the copy. With the Transform tool (the cursor icon), nudge the lower layer diagonally. The distance sets the apparent depth: a larger offset reads as a thicker object.
- Fill the gap. An offset alone leaves gaps. Either duplicate and merge many copies in small steps to build a solid edge, or draw connecting lines between matching corners with a monoline brush and fill the enclosed areas in the dark shade.
- Merge the side layers. Combine the extrusion layers into one, keeping the front face separate so you can edit lighting on it independently.
A tip for cleaner results: keep your offset direction consistent across the whole composition. If you extrude one element toward the lower right, every other element should follow, or the scene will read as flat and inconsistent.
Add Light, Shadow, and Highlights
An extrusion by itself looks like a flat sticker with a shadow. What makes it feel dimensional is a consistent light source.
- Pick a light direction first. If the extrusion goes to the lower right, light comes from the upper left. Highlights go on the top and left edges of the face, and the darkest values go on the faces turned away from the light.
- Use clipping masks. Put shading layers above the face or side layer and clip them so paint never spills outside the shape.
- Use blend modes. Multiply works for shadows, and Add or Screen works for highlights. Painting on separate layers lets you adjust opacity later without redoing the artwork.
- Cast a ground shadow. Duplicate the extrusion, fill it with black or a deep tone, flatten it against the ground plane with Transform → Distort or Warp, and blur it with Gaussian Blur. A softer, more distant shadow suggests the object is floating higher.
- Add a rim or bounce light. A thin lighter edge on the shadow side, in a color borrowed from the background, separates the object from its surroundings.
Method 2: Embossed and Warped Effects
Not every 3D effect needs an extrusion. Two quick tricks create dimensional graphics from flat patterns.
Blur-based emboss. Draw a line or shape, outline it in a contrasting tone, merge the line layers, and apply Adjustments → Gaussian Blur. The softened edges create a glow that makes the line look raised. Light blur on a highlight layer plus a dark blur on a shadow layer, offset in opposite directions, gives a convincing bevel.
Liquify and Warp. Take a flat pattern like a checkerboard or stripes and push it along a curve with Adjustments → Liquify → Push. Then put a blurred highlight line along the same curve. The distortion makes the pattern appear to bend over a surface, and the highlight confirms the form. Transform → Warp and Distort work similarly for wrapping artwork around a rough cylinder or sphere.
These effects are fast and graphic, but they only hold up from one viewpoint. That matters later if you want to rotate or move a camera around the result.
Method 3: A Flat 3D Brush
If you do a lot of lettering, building a dual brush that gives a cylindrical, extruded stroke can be faster than manual layering. The usual recipe:
- Build the brush shape on a square canvas, black background and white shape, with a diagonal shape whose length controls the extrusion depth.
- Set the shape source from your copied artwork, with stroke spacing low (around 5%) so the stroke stays continuous.
- Set rendering mode to a blending option such as Intense Blending, and turn off Apple Pencil pressure opacity so the effect stays consistent.
- Re-center the shape so the pencil tip corresponds to the top face, not the middle of the stroke.
Expect to tweak size limits, since scaling the brush shape down changes how large the strokes can get. It is a good option for repeatable lettering, but a brush will not give you the control of hand-built layers for hero artwork.
Method 4: Paint on a Real 3D Model
Procreate can open 3D OBJ and USDZ files and let you paint directly on the surface. This is real 3D in the sense that the model has geometry you can orbit around.
Prepare the model. Procreate needs UV maps. If you import an OBJ without them, you will get a "missing UVs" error. Fix this in your modeling app by auto-unwrapping the UVs and re-exporting. Apps like Nomad Sculpt have a UV unwrap option, and other 3D apps may offer similar tools.
Paint. Open the model from the Gallery and paint on it as you would any canvas. Procreate's 3D Actions menu, which appears only when a 3D file is open, includes several useful tools:
- Show 2D Texture unwraps the model into a flat texture map, which is handy for laying down base colors and fine detail. Painting there works like regular 2D painting.
- Paint Through Mesh lets strokes pass through unselected meshes, so you can reach an object hidden behind another.
- Edit Lighting opens Lighting Studio, where you add lights and adjust hue, saturation, and intensity, plus environmental lighting.
- View in AR places the model on a flat surface using the iPad camera. Note that AR uses ambient lighting from the camera, not your Lighting Studio setup.
This route is best for stylized props, product mockups, and textures you want to preview in context. It is not a replacement for a rendering pipeline: you get painted textures and basic lighting, not production-grade shading or animation.
Getting Procreate Artwork into a Motion Pipeline
For motion designers, a 3D look painted in Procreate is usually a starting asset, not the final deliverable. A few practical points:
- Export layered files. A layered PSD keeps your face, extrusion, highlight, and shadow layers separate. In After Effects, that lets you parallax the layers, animate shadows independently, or rebuild the depth with a camera and null objects.
- Keep depth layers organized. Name layers by depth and group them. A clean stack makes it much easier to offset layers in Z space later.
- Export at high resolution. Work on a canvas big enough for the final delivery size. Blur and warp effects soften detail, and you will not want to rescale them up.
- Know the illusion's limit. Fake extrusions break the moment the camera moves off axis. For a real orbit, you need either true geometry or a way to generate new views.
Where Styleframe Fits for Moving 3D Looks
If you need your Procreate illustration to rotate or sit inside a dimensional scene, you can either rebuild it in a 3D app or generate the dimensional motion. is an AI video and motion tool, and it can help with the second path.
You could bring a finished Procreate piece in as a reference to explore generated dimensional or rotating views of the flat artwork. As with any AI-assisted step, review results frame by frame, since generated views of complex lettering or fine detail may need cleanup or a hybrid approach with real 3D.
Which Method Should You Use?
- Flat graphic or lettering: extrude with duplicated layers and shade carefully.
- Quick embossed or bent patterns: Gaussian Blur and Liquify.
- Repeatable lettering style: build a dual brush.
- Textured object you want to view from all angles: import a UV-mapped OBJ or USDZ model and paint it in 3D.
- Motion with a camera move or rotation: export layers for a parallax rebuild in After Effects, rebuild in a 3D app, or generate the dimensional motion with a tool like Styleframe.
Procreate gives you convincing depth for stills very quickly. The key is choosing a light direction early, keeping your layers organized, and planning for how the artwork will move before you flatten anything.