How to Make 1 Inch Graph Paper in Procreate
StyleFrame Team7 min read
To make 1 inch graph paper in Procreate, create a custom canvas in inches at a known DPI (300 DPI gives 300 pixels per inch). Then turn on the 2D Grid under Actions → Canvas → Edit Drawing Guide and adjust Grid Size until whole-inch squares line up with the canvas edges. The 2D Grid is a guide overlay on your artwork rather than a drawn layer, so if you need printable or reusable lines, build the grid elsewhere (After Effects works well) and import it as a locked Multiply layer.
Why "1 inch" needs a plan in Procreate
Procreate thinks in pixels and DPI, not physical units. A canvas is a fixed pixel grid, and "inches" only exist as a ratio between pixel dimensions and the DPI you set. At 300 DPI, one inch is 300 pixels. At 132 DPI, it's 132 pixels.
Procreate's built-in 2D Grid also has a Grid Size control that adjusts the scale of the grid. So you have two jobs: pick a canvas where the math is clean, and verify that the squares match it.
If you're coming from After Effects, think of it like comp resolution versus a print target. The pixel dimensions are what's real. Everything else is metadata.
Step 1: Create a canvas with clean inch dimensions
- Open the Procreate Gallery and tap +, then the custom canvas icon.
- Switch the units to Inches.
- Enter a whole-inch size such as 8 × 10 in. Whole numbers matter because they let you count squares across the canvas to check your grid.
- Set DPI to 300. An 8 × 10 in canvas becomes 2400 × 3000 px, so each inch is exactly 300 px.
- Name it something like "Graph 8x10 300dpi" and tap Create.
Step 2: Turn on the 2D Grid and calibrate it
- Tap Actions (wrench) → Canvas.
- Turn on Drawing Guide, then tap Edit Drawing Guide.
- Tap 2D Grid at the bottom of the screen.
- Use the Grid Size slider to change the scale of the squares.
Here's how to make sure each square is 1 inch:
- On an 8 × 10 in canvas, you want exactly 8 squares across and 10 down.
- Adjust Grid Size until the eighth vertical line lands on the right edge of the canvas.
- Drag the blue Positional node so the grid starts flush with the top-left corner. Use the green Rotational node only if you want an angled grid. Tapping a node and choosing Reset returns to the defaults.
- Zoom in at the canvas edges to confirm that the last line sits on the border rather than a few pixels short.
The slider can be fiddly, and a small error compounds over eight squares. If you can't land it exactly, use the import method below instead of tolerating a grid that drifts.
You can also adjust Color, Opacity, and Thickness here. Pale blue or gray at low opacity mimics real graph paper and stays out of the way of linework. Turning on Drawing Assist snaps your strokes to the grid direction, which helps with technical layouts, isometric-style planning, and UI mockups.
What the 2D Grid can't do
The Drawing Guide is a drawing aid that overlays your artwork, not a layer of it. If your goal is to print graph paper, share a template, or composite drawings over a grid in another app, you need real pixels on a layer.
Step 3: Build a printable grid layer in After Effects
Because you already work in After Effects, this is the most precise route. The Grid effect gives you exact pixel spacing.
- Create a comp at your Procreate canvas size, for example 2400 × 3000 px.
- Add a white solid, then apply Effect → Generate → Grid.
- Set Size From to Width & Height Sliders.
- Set Width and Height to 300 for 1-inch squares at 300 DPI.
- Set Border to around 3 to 4 px for a major line. Pick a light gray or blue.
- Adjust the Anchor so lines don't get clipped at the edges. Make sure the first and last lines sit on the border, or offset by half the border width.
- Export a still with Composition → Save Frame As → File.
For a more traditional graph paper look, duplicate the solid, set Width and Height to 75 (quarter-inch squares at 300 DPI), reduce the border to 1 to 2 px, and lower the opacity. Stack it under the 1-inch grid. You get light minor lines with heavier inch lines, the same structure used by a shared Procreate grid template that pairs a quarter-inch light grid with heavier 1-inch lines.
Import it into Procreate
- Save the PNG to Photos or Files on your iPad.
- In your Procreate canvas, tap Actions → Add → Insert a photo.
- If the image has the same pixel dimensions and aspect ratio as the canvas, it should fill it cleanly. Use Magnetics or Snapping in the Transform tool to keep it aligned.
- Set the layer's blend mode to Multiply so the white background disappears and only the lines remain.
- Lock the layer by swiping left on it and tapping Lock, so you don't nudge it while drawing.
Now you have a true graph paper layer that exports with your artwork.
Step 4: Save it as a reusable template
You don't want to rebuild this every time.
- In the Gallery, swipe left on the finished canvas and tap Duplicate before you draw on it. Keep the clean version as your master.
- Create variants: 8.5 × 11 in, 11 × 17 in, and a landscape version.
- Share a template by swiping left on the canvas and choosing Share → Procreate. That exports a .procreate file you can send to teammates. Shared templates in the Procreate community often arrive as .procreate files you open through the "Open in" screen, or via the upload icon in the Gallery.
- If you want a dot grid instead, use the same After Effects approach with a small-shape layer or a repeating pattern. Many artists prefer dots for loose layouts because they distract less from sketching.
Common problems and quick fixes
Squares aren't exactly 1 inch when printed. Check that the canvas DPI is what you think it is, and print at 100% scale, not "fit to page." Printer margins can also crop edges.
The grid looks blurry. Your canvas DPI is too low or the imported image was scaled. Rebuild at the target pixel dimensions and import without resizing.
Lines drift across the canvas. Your Grid Size slider is slightly off. Switch to the imported grid layer, where spacing is defined numerically.
You want a black background. Instead of Multiply, put a dark fill layer underneath, invert the grid layer's colors, and set the blend mode to Screen or Add. Alternatively, render a white-line version from After Effects with a transparent background.
You need metric or other scales. Change the canvas units to cm or mm and choose a size such as 21 × 29.7 cm. Calculate pixels per centimeter from your DPI, then set the After Effects Grid width and height to match. For architectural scales like 1:50, work out the real-world size first, then convert to pixels.
Where a 1-inch grid helps in a motion pipeline
A calibrated grid isn't just for sketchbook work. Motion designers use it for:
- Storyboards and animatics, where consistent safe areas and thirds keep frames comparable.
- Layout and composition studies, such as lining up logo lockups, type blocks, and camera moves before you open After Effects.
- Character and prop turnarounds, where the grid helps you maintain proportion across poses.
- Timing and spacing charts for hand-drawn animation, with the grid acting as a measurement ruler.
When you bring the art into After Effects, export at the same pixel dimensions and place it in a comp of the same size. That way one grid square equals 300 px, and any measurements you took on paper carry over. Hide or delete the grid layer in Procreate before exporting if you only want the artwork itself.
Quick checklist
- Whole-inch custom canvas at 300 DPI (300 px per inch).
- 2D Grid enabled and calibrated by counting squares edge to edge, or an After Effects-generated grid imported for exact spacing.
- Grid layer set to Multiply and locked.
- Minor quarter-inch grid underneath if you want traditional graph paper.
- Master canvas duplicated and saved as a template.
- Drawing Guide kept in mind as a drawing aid, not a layer.
With one calibrated template, every future layout, storyboard, or turnaround starts from the same measurable foundation, and your handoff to After Effects stays predictable.