How to Line Art Procreate
StyleFrame Team8 min read
To line art in Procreate, drop your sketch to a very low opacity (roughly 3-15%), lock it, and ink on a new layer above it with a stabilized, pressure-sensitive brush. Use long, pulled strokes instead of short traced segments, and vary line weight so outer contours are thicker than inner details. If you're starting from a photo, you can build a rough line extraction with a desaturated duplicate layer, an inverted copy set to Color Dodge, and a Gaussian Blur. Either way, plan the export early if the art is headed into After Effects or another compositing tool.
Set Up the Canvas Before You Draw
Line art exposes resolution problems faster than painted work. Thin, high-contrast edges show every stair-step, so start bigger than you think you need.
- Canvas size: Work at 300 DPI if the piece might be printed or cropped. For video, build the canvas at least at your delivery resolution, and ideally larger so you can scale or push in during the edit without softening edges.
- Color profile: If the art is going into a color-managed pipeline, set the canvas profile deliberately. Line art is usually black or near-black, but the colors you place underneath will shift if the profile doesn't match your comp.
- Reference window: Open a reference window so you can see the whole piece while zoomed in. This matters more than it sounds, because zoomed-in line work tends to drift in weight and wobble when viewed at full size.
- Gesture shortcuts: Under Actions > Prefs > Gesture Controls, set up Quick Menu and layer selection so you aren't hunting through the layer stack mid-stroke.
Prepare the Sketch
Clean line art depends on the sketch underneath it. A vague sketch means you make design decisions while inking, and that is where lines go stiff.
Resolve the details first: hands, overlaps, folds, hair clusters. Keep the sketch energetic and accurate. Gesture and rhythm in the sketch carry through into the ink, while unresolved guesswork forces you to realign lines later.
If you're working from a photo, use it as a base layer to simplify from rather than copy. Reduce its opacity, sketch loosely on a new layer, and decide what to omit. Simplifying, such as drawing two rings on a wheel instead of seven, is what separates an illustration from a trace.
Ink Over the Sketch Without Tracing It
The most common reason line art looks worse than the sketch is that the artist follows the sketch line by line, copying every wobble.
- Lower the sketch opacity drastically. Aim for a faint ghost, not a visible drawing. You should be able to find the structure but not follow every stroke.
- Change the sketch color. Switching it to blue or red separates it visually from the black ink.
- Lock the sketch layer so you can't accidentally draw on it.
- Create a new layer above it for the ink. For complex pieces, use separate layers for figure, props, and background so you can adjust or hide them later.
Because the sketch is faint, you interpret it instead of tracing it. Your lines become decisions, not copies.
Choose a Brush and Stabilization
For clean, confident lines, you want a brush that responds to pressure but doesn't jitter.
- StreamLine: In the brush settings, StreamLine smooths and corrects strokes. Higher values make long curves cleaner but can make tight curves feel loose or overcorrected. Lower it, or switch to a less stabilized brush, for hair, hatching, and small circles.
- Pressure response: Pick a brush where pressure changes thickness. Pressing harder on downstrokes or in shadowed areas gives you natural tapering without manual cleanup.
- Texture: A smooth inking brush gives a vector-like look. Procreate's default chalk brush (under Calligraphy) gives a textured, hand-drawn feel, and works well as a starting point without custom settings. If you tweak a brush, duplicate it first so you keep the original.
- Physical setup: Turn on palm rejection. If your hand drags on the glass, an artist's glove reduces friction.
Quick Shape also helps. Draw a line and hold at the end, and Procreate snaps it straight, which is useful for architecture, props, and mechanical edges.
Draw With Pulled Strokes
Technique matters as much as settings. Pull strokes toward your body, using your shoulder and elbow rather than just your wrist, and avoid pushing upward against the canvas, which gives less control. Rotate the canvas so the curve you're drawing is always a comfortable pull.
Draw each line in one stroke where you can. Many short, overlapping strokes produce lumpy joins that are painful to fix. If a stroke goes wrong, undo and redraw it; don't patch it. Redrawing a single line takes seconds and almost always looks better than a corrected one.
Control Line Weight
Line weight is where line art starts to look designed instead of merely drawn. A few reliable principles:
- Outer contours thicker, inner details thinner. This separates the silhouette from interior detail.
- Foreground thicker than background. When one object overlaps another, the front object's edge should carry more weight.
- Thicken at intersections. A little extra weight where forms meet suggests contact and shadow.
- Taper with intent. A curve that is thin at both ends and thick in the middle feels forceful. One that starts thick, thins, and thickens again feels stretched. Pick based on the energy you want.
If your art is going to be animated or composited, decide on a consistent weight system now. Inconsistent weights across keyframes are far more noticeable in motion than in a still.
Turn a Photo Into Line Art in Procreate
Procreate doesn't have a one-tap "extract lines" command, but you can approximate one with layers and blend modes. The results are softer than a dedicated edge-detect filter, so treat it as a reference or underdrawing tool.
- Insert your photo (Actions > Add > Insert a Photo) and fit it to the canvas.
- Duplicate the layer and desaturate the copy (Adjustments > Hue, Saturation, Brightness, saturation to zero).
- Duplicate the desaturated layer, then invert it with Adjustments > Curves by flipping the curve from uphill to downhill.
- Set the inverted layer's blend mode to Color Dodge. The canvas will go mostly white.
- Apply Gaussian Blur to the inverted layer and increase it gradually until outlines appear.
A variation uses the Divide blend mode on a desaturated duplicate, followed by Gaussian Blur, then a Curves adjustment to push the blacks and whites.
Tune the blur amount per image. Low values give fine, scratchy edges; higher values give bolder, simpler lines.
Color Underneath the Extracted Lines
The extracted result is a grayscale image with a white background, not true transparent line art. To paint beneath it, set that layer's blend mode to Multiply (Linear Burn, Color Burn, or Darken also work, with subtle differences). Then add new layers underneath and color freely. Bringing the original photo back underneath is also a quick way to preview a hybrid look.
Prepare Line Art for Motion Work
If the drawing is a style frame, character design, or element for animation, a few habits will save time in After Effects.
- Keep layers separate. Ink, flat colors, shading, and background should live on separate layers. Export in a format that preserves layers for After Effects or Photoshop.
- Export individual elements with transparency when you want to place them directly in a comp. Hide the background layer first.
- Name layers before export. Clean names make the import easier to manage once you have dozens of elements.
Where Styleframe Fits After the Line Art
Procreate is excellent for authoring the drawing. The harder question in a motion pipeline is what to do with a handful of hand-drawn frames when you need consistent movement, alternate looks, or more material than you can draw by hand.
Tools like Styleframe are one option for extending hand-drawn frames into motion, with your own reference images and frames as the starting point. Your compositing workflow, and your control over the final image, stay where they are.
As with any generative tool, results depend on the quality of your references. Strong, consistent line art in gives you a far better chance of consistent output.
Common Line Art Mistakes to Avoid
- Tracing instead of interpreting. Keep the sketch faint enough that you must decide each line yourself.
- Over-stabilizing. Too much StreamLine rounds off corners and flattens expressive curves.
- Uniform line weight. Lines of identical thickness read as flat and mechanical.
- Working too small. Low-resolution canvases pixelate thin lines, and scaling up later makes it worse.
- Merging layers too early. Keep ink, color, and shading separate until you're sure the piece is finished.
- Ignoring the destination. If the art is going into a video timeline, check resolution, aspect ratio, and transparency before you finalize.
Summary
Good Procreate line art comes from a resolved sketch, a faint locked underlay, a stabilized pressure-sensitive brush, confident pulled strokes, and deliberate line weight. For photo-based work, the Color Dodge or Divide blend-mode methods give you a workable starting point, and Multiply lets you color underneath. Once the drawing is done, export it with layers and transparency in mind, then take it into your motion pipeline, where your drawn work stays in charge.