How to Jellyfish Procreate
StyleFrame Team7 min read
To draw a jellyfish in Procreate, fill the canvas with a dark blue underwater background and a soft light source, then draw a white oval for the bell and reshape it with Liquify's Push tool. Erase the inside with a soft airbrush, lower the layer's opacity so the body turns translucent, and add color with Alpha Lock. Finish with tentacles, glow, and highlights on clipped Overlay layers. If the jellyfish is headed for animation, keep the bell, tentacles, and glow on separate layers so you can export them to After Effects or use them as keyframes.
What You Need Before You Start
You only need Procreate, an iPad, and an Apple Pencil or similar stylus. A few settings save time later:
- Canvas size: For a standalone illustration, a tall canvas such as 2800×3500 px gives plenty of room. For motion work, match your comp instead, for example 3840×2160.
- Brushes: A soft airbrush, a hard-edged marker or inking brush, and one textured brush are enough.
- Stabilization: If your linework wobbles, open Actions > Preferences and raise stabilization. Around 40–50% suits smooth bell outlines.
- Color palette: Choose it up front. A navy base, a lighter blue for ambient light, a fluorescent cyan or magenta for the body, and a near-white for highlights is a reliable underwater scheme.
Step 1: Build the Underwater Background
Start on the bottom layer and fill it with a deep navy. Drop a color into the canvas by dragging the color swatch onto it.
Next, pick a lighter blue and a large soft airbrush. Paint a patch of light in one corner or at the top, as if sunlight were filtering down through the surface. Then go to Adjustments > Gaussian Blur and blur the layer until the gradient reads as ambient haze instead of a visible brush stroke.
This step matters more than it looks. A translucent subject only works when there is something behind it to show through, and the light direction you set here tells you where the jellyfish's rim light and highlights belong.
Step 2: Create the Bell With a Shape and Liquify
Create a new layer and use a plain white brush to draw an oval. Hold your pencil at the end of the stroke and Procreate will snap it into a clean ellipse. Tap the QuickShape edit option if you need to adjust proportions, then fill it by dragging the color in.
Now move the shape into position and go to Adjustments > Liquify. Choose Push, set a moderate size, and drag the edges:
- Push the bottom edge upward in a few places to create a scalloped, flared rim.
- Pull the sides slightly outward so the bell looks like it is mid-pulse.
- Keep the top domed and smooth, since most of the form lives there.
Liquify is forgiving, so a few quick passes beat one precise one. The slightly irregular edge reads as organic, which is what you want from something that is basically water in a bag.
Step 3: Make the Body Translucent
A solid white bell looks like a ghost costume. To get a see-through body:
- Take your eraser, switch it to a soft airbrush, and erase the interior of the bell, leaving the edges heavier. The rim of a jellyfish catches more light and looks denser than the center.
- Open the layer's settings by tapping the N icon and lower the opacity until the background shows through comfortably.
- Duplicate the layer. You will color one copy and keep the other as a clean white base.
Keep the erasing uneven. Real jellyfish have internal structures such as gonads and canals that break up the transparency, so a perfectly smooth gradient will feel flat.
Step 4: Add Color With Alpha Lock and Clipping Masks
Select the duplicate layer and turn on Alpha Lock. Now anything you paint stays inside the existing shape, with no spill onto the background.
Pick a fluorescent blue and use a soft airbrush to color only certain areas, such as the rim, the lower interior, and one side of the dome. Leave parts of the white showing. Add a second and third hue, such as violet or pink, in small patches so the bell has variation instead of one flat tint. Then use a smudge tool set to the same soft brush to blend the transitions.
When the color looks right, turn Alpha Lock off and keep working inside the shape with a soft airbrush to deepen the translucent look. Then merge the white and colored layers if you no longer need them separate.
For texture and sparkle, add a new layer above the bell and set it as a Clipping Mask. Change the blend mode to Overlay and paint with a textured brush in a light color. Because it is clipped, the texture can never leave the bell. You can stack several clipped layers, each with its own blend mode, and toggle them independently later.
Step 5: Draw the Tentacles and Oral Arms
Jellyfish have two kinds of trailing structures, and separating them makes the drawing more believable:
- Oral arms: Thick, ruffled, ribbon-like forms that hang from the center underneath the bell. Draw these with a wider brush and wavy, overlapping strokes.
- Tentacles: Thin, long, and often slightly beaded lines that start at the rim. Use a smaller, pressure-sensitive brush and draw each with a single confident motion.
Put each group on its own layer, underneath the bell layer if you want them to appear to emerge from behind it. Lower the opacity of the tentacles a little, and fade them toward the ends with a soft eraser. Distance and depth in water come from falling contrast, so the tips should almost disappear into the background.
Vary the curve direction across tentacles. If they all trail the same way, the jellyfish looks like it is hanging from a hook instead of drifting.
Step 6: Add Glow, Highlights, and Particles
The finishing pass sells the underwater feel:
- Glow: Duplicate the colored bell layer, apply a Gaussian Blur, and set the blend mode to Add or Screen. This creates a soft halo that suggests bioluminescence.
- Rim light: On a clipped layer, paint a thin, bright edge on the side facing your light source from Step 1.
- Highlights: Add a few small white strokes on the dome, positioned consistently with the light.
- Particles: On a new layer behind the jellyfish, add small bubbles or floating specks with a textured brush. Vary their size and opacity.
Stop earlier than you think you should. Glow layers are easy to overdo, and a restrained halo looks more professional than a heavily blown-out one.
Organizing Layers for Animation
If you are a motion designer, the illustration is often only the first deliverable. A few habits make a Procreate jellyfish far more useful downstream:
- Name your layers: Bell, rim light, oral arms, tentacles A/B/C, glow, particles, background.
- Keep elements separable: Avoid merging the tentacles into the bell. You will want to move or warp them independently.
- Paint past the edges: Extend tentacles and glow slightly beyond where they begin so they do not reveal hard edges when rotated.
- Export with layers intact: Export a layered file so each element stays separate in your compositing app. Check that Overlay and Add layers behave the same there, because blend modes occasionally need re-checking.
- Save pose variants: Duplicate the canvas and draw the bell in a contracted pose and a relaxed pose. These are the natural extremes of a jellyfish pulse cycle.
Inside After Effects, you can then animate the separate bell and tentacle layers to get a drifting pulse from a single illustration.
Common Mistakes to Avoid
- Skipping the background: Translucency cannot be judged against a blank canvas. Paint the environment first.
- Over-smooth gradients: Add irregular patches and texture so the body does not look like plastic.
- Uniform tentacles: Vary length, thickness, curve, and opacity.
- Inconsistent lighting: Make sure rim light, glow, and highlights all respect the light source from Step 1.
- Merging too early: Flatten only when you are certain you will not animate or revise the piece.
Quick Recap
- Paint a navy background with a blurred light source.
- Draw a white oval and push it into a bell with Liquify.
- Erase the interior and lower opacity for translucency.
- Color with Alpha Lock, then add texture on clipped Overlay layers.
- Draw oral arms and tentacles on separate layers.
- Add glow, rim light, highlights, and particles.
- Name and organize layers, export a layered file, and animate in your compositing app.
Once you have the workflow down, the same structure works for other translucent creatures, from ghostly squid to glowing moths. Only the shape and palette change.