How to Invert Selection Procreate
StyleFrame Team8 min read
To invert a selection in Procreate, make a selection with the Selection tool (the S icon in the top toolbar), then tap Invert in the toolbar at the bottom of the screen. Everything you selected becomes unselected, and everything outside it becomes selected. This works with any of the four modes (Automatic, Freehand, Rectangle, Ellipse) and with a selection created from a layer's content.
If you build mattes, textures, or cel art in Procreate and bring them into After Effects, Nuke, or a 3D package, this one button saves a lot of redrawing. The sections below cover each way to get to Invert, what to do when it seems to be missing, and how to turn an inverted selection into a clean production asset.
The fast method: draw, then invert
- Open the toolbar's ellipsis menu if the Selection tool isn't visible, then tap the Selection button (S icon).
- Pick a mode at the bottom: Automatic, Freehand, Rectangle, or Ellipse.
- Select the area you want to protect or isolate.
- Tap Invert.
- Tap another tool (Brush, Smudge, Eraser, Transform) to commit the selection.
Once committed, the unselected area is shaded with moving diagonal lines. Anything you paint, erase, fill, or transform now only affects the area outside your original shape.
A practical example: you've drawn a character over a flat background and want to repaint the background without touching the linework. Select the character with Freehand, tap Invert, and paint freely. The edges of your original selection act as a hard boundary.
Choosing the right selection mode before you invert
Invert only flips whatever you gave it, so a clean starting selection matters.
Automatic
Tap a region and Procreate selects the contiguous area. Dragging your finger after the tap changes the threshold, the same way it does with ColorDrop. This is the best choice for flat-color illustration and cel-style art, where the area you want is a solid shape. Select the shape and invert to get everything else.
Freehand
Draw a fluid line for organic shapes, or tap to place points for a polygonal edge. You can combine both in one selection. Tapping Add a second time closes an open loop. Use this for hair, silhouettes, and irregular props.
Rectangle and Ellipse
Drag a shape over the area. These modes are the quickest way to create a vignette or a framing mask: select a centered ellipse, invert, then fill the outside with a dark color.
Switching modes mid-selection
You can change modes while building a selection and combine them. Start with a rectangle, then switch to Freehand and use Add or Remove to refine the edge, then invert once the shape is right.
Inverting a selection from a layer's content
A common workflow is to select everything a layer contains (a shape, a stencil, a mask) and then invert it, so you don't have to redraw the outline each time.
- Tap the Selection button (S icon) first so it is highlighted.
- Open the Layers panel, tap the layer's thumbnail to open its menu, and tap Select to select the layer's content. The selection is based on the pixels present on that layer.
- Tap Invert.
- Switch to the layer you want to paint on and work in the inverted area.
This is useful for painting inside or outside a saved shape on a separate layer. Paint inside it with the original selection, or tap Invert to paint around it.
Users on Procreate's support forums have noted that the layer-based selection behaves differently than it used to. It can feel more sensitive to layer opacity, and the options for editing the selection may not appear. If you don't see the buttons you expect, the sequence above (open the Selection tool first, then select from the layer) is the reliable fallback.
If the Invert button seems to be missing
Several things can make Invert look absent:
- The Selection tool wasn't opened first. Selecting from a layer without the Selection tool active can leave you with a selection but no Invert option. Tap the Selection button first, then select from the layer.
- There's no active selection. Invert needs something to flip. Make a selection first.
- You're in a different tool. Tapping Brush or Smudge commits the selection and hides the selection options. Tapping the Selection button again cancels the selection, so save it first if you need it.
- The toolbar is collapsed. Swipe up on the center handle of the Selection interface to expand it and see all options. Swiping all the way down dismisses Selection.
- Version differences. If your layout doesn't match a tutorial, update Procreate and check the Selections section of the Procreate handbook for your version.
One alternative trick from the community: when you draw a selection, the Add and Remove buttons light up. Tapping Remove with a drawn shape effectively selects everything outside it, which gives the same result as Invert. Tapping Add or Remove also tends to enable the Invert button.
Refining an inverted selection
Inverting rarely ends the job. After you flip a selection:
- Add and Remove let you tweak the shape. Use Remove with a small Freehand selection to carve out stray areas, or Add to pick up pieces you missed.
- Feather softens the edge of the selection so paint or adjustments blend instead of cutting off hard. This is useful for glows, shadows, and vignettes.
- Color Fill floods the selection with your current color in one tap, which is a fast way to check what's selected.
- Copy & Paste duplicates the selected area onto a new layer, handy for pulling the background away from a subject.
- Save & Load stores a selection so you can recall it later, so you don't have to rebuild a complex edge after you've inverted and changed it.
- Undo and redo while drawing: two-finger tap undoes your last selection action, and three-finger tap redoes it.
Making a matte from an inverted selection
If your destination is After Effects or Nuke, a selection is most useful as a matte or alpha.
- Create a new layer above your artwork.
- Select the subject (Automatic mode if it's a clean shape, Freehand if not).
- Fill the selection with white using Color Fill, or drag your color to the selection.
- Tap Invert, then fill the outside with black.
- Hide the artwork layers and export the matte as a PNG, or export the full document as a layered PSD so you can pull the matte from within After Effects.
This black-and-white layer works as a track matte or a luma matte in After Effects, or as a mask input in Nuke. Keep the selection edges clean before export. Feather lightly if you need soft edges, because heavy feathering at low resolution turns into banding when it's scaled up in comp.
Set the canvas to the final comp resolution when you create the document. Resizing a hand-drawn matte later softens the edge you worked to define.
The same idea in your compositing tools
The concept of inverting carries across applications, so what you learn in Procreate transfers.
- After Effects: Each mask has an Inverted checkbox in the timeline, and Layer > Mask > Invert (Ctrl/Cmd+Shift+I) flips the selected mask. Track mattes also have an invert option.
- Photoshop: Select > Inverse (Shift+Ctrl/Cmd+I).
- Nuke: Most mask inputs and Roto nodes have an invert checkbox, and you can also use an Invert node on the alpha channel.
- Blender: In Edit Mode, Select > Invert (Ctrl/Cmd+I) flips the current selection. Image Editor masks and compositor nodes have invert options too.
If you move work between Procreate and these apps, keep your mattes in a consistent convention (white reveals, black hides) so you don't have to remember which direction each file runs.
Where Styleframe fits alongside Procreate
Selections and inversion in Procreate are for hand-controlled isolation: painting inside or outside a shape. For many motion tasks, though, you're isolating or extending a still for movement, not repainting it. is an AI video and motion tool built for artistic control, and it works well with stills you've prepared in Procreate.
- Frames-to-Video is driven by keyframes. You can paint a start and end frame in Procreate, keep your selection-based edits, and use those frames as the anchors for motion. Reference images and video clips guide the result, so the output follows your art rather than a random interpretation.
- Remove Background can handle subject isolation when you don't need a hand-built selection. If you still need a precise edge, keep using Procreate's tools.
- Restyle and Ink-and-Paint are reference-driven style transfer. They let you push a frame toward a specific look using references you choose.
- 2D-to-3D and Turntable can extend a flat illustration into dimensional views.
The goal is to keep the compositing workflow you already trust, with Styleframe supplying controlled generation rather than a one-click result you can't steer.
Quick troubleshooting checklist
- Invert did nothing visible: Check that a selection is committed by tapping another tool and looking for the diagonal shading, which should now cover the area you originally selected.
- Edge looks jagged: Use Feather before you fill, or work at the final resolution.
- Selection from a layer includes unwanted semi-transparent pixels: Clean the layer's low-opacity pixels first, since Procreate's layer selection responds to opacity.
- Lost your selection after switching tools: Tapping the Selection button again cancels the selection. Use Save & Load before you try anything risky.
- Painting spills over the edge: Make sure the selection is committed and that you're on the right layer.
Summary
Inverting in Procreate takes two steps: make a selection, then tap Invert. The extra work is in choosing the right selection mode, refining with Add, Remove, and Feather, and saving the selection so you can reuse it. Once you treat inversion as a matte-making step, Procreate becomes a quick way to prepare isolated assets and keyframes for After Effects, Nuke, or any other tool in your pipeline.