How to Invert Procreate
StyleFrame Team8 min read
To invert colors in Procreate, open the Layers panel, tap the layer you want to flip, and choose Invert from the Layer Options menu. To invert a selection instead, make a selection with the Selection tool and tap Invert in the toolbar at the bottom of the screen. Procreate inverts one layer at a time, so for a whole canvas you need to invert every layer, or copy the merged canvas, paste it as a new layer, and invert that.
Invert the colors of a layer
This is the most common meaning of "invert" in Procreate. Every color on the layer becomes its opposite, so black turns white, light blue turns orange, and so on.
- Open the Layers panel.
- Tap the layer once to select it.
- Tap the layer again to open Layer Options.
- Tap Invert.
Transparency is preserved. Only the pixels with color change. The change is applied to the pixel data on that layer, so it is not a live effect you can toggle. If you want to reverse it later, run Invert again (inverting twice returns the original values) or use Undo with a two-finger tap.
Duplicate the layer first if you are experimenting. Hide the original with its visibility checkbox and work on the copy.
Invert a layer mask
Masks follow the same path. Select the mask thumbnail beneath its parent layer, open Layer Options, and tap Invert. This swaps what is revealed and what is hidden. It is the quickest way to flip a mask without repainting it, and it leaves the parent layer's pixels alone.
Invert an Alpha Lock result
Alpha Lock restricts painting to existing pixels, so it does not have an invert of its own. If you want to paint everywhere except the artwork, select the layer content (Layer Options > Select), invert the selection, and paint on a new layer. The next section covers selection inversion.
Invert a selection
Inverting a selection selects everything you did not select. It is useful for masking out a subject and then working on the background.
- Tap the Selection tool (the S-shaped icon).
- Choose a mode such as Automatic, Freehand, Rectangle, or Ellipse.
- Make your selection. Moving diagonal lines mark the area outside it.
- Tap Invert in the bottom toolbar.
The marching lines flip to the other side. You can then fill, clear, blur, adjust, or transform the new selection.
To invert the contents of a layer as a selection, choose Layer Options > Select, which selects only the non-transparent pixels. Then use the Selection tool's Invert button to flip it. Procreate's selection toolbar has changed across versions, and users have reported hunting for the Invert button after selecting layer content. If you do not see it, tap the Selection tool again so the toolbar is active, then check for the Invert button. Adding or subtracting from a selection with the plus and minus modes also exposes the Invert button.
This is how you build clean cutouts: select the subject, invert, and clear the background, or invert and save the selection as a mask for later.
Invert the entire canvas
Procreate has no single "invert the document" command. There are two practical workarounds.
Option 1: Invert each layer. Fine for simple files with a handful of layers. Be careful with layers that use blend modes, because inverted colors can interact with Multiply, Screen, or Overlay in surprising ways.
Option 2: Invert a merged copy.
- Open the Actions menu (wrench icon).
- Choose Add > Copy Canvas, then Add > Paste. A flattened copy lands on a new layer.
- Invert that layer through Layer Options.
This approach leaves your original layers untouched, and you can hide or delete the inverted copy. It is also what you want for a quick negative check of your values: if the inverted version still reads clearly, your contrast structure is sound.
A shortcut for quick value checks
Many illustrators flip to grayscale to check values rather than inverting. If that is your goal, you can use the Adjustments menu or a Color blend layer on top. For a true negative, though, the Invert method above is right.
Invert using Curves or a blend mode
If you want something closer to an adjustable inversion, there are two alternatives.
- Curves: In Adjustments, open Curves and drag the black point to the top and the white point to the bottom of the Gamma graph. That produces an inverted tonal mapping, and you can bend it for partial or stylized inversions. Adjustments can be applied to a layer or in Pencil mode, but they still alter pixels once committed.
- Difference blend mode: Fill a new layer with white and set its blend mode to Difference. Everything beneath it appears inverted. Hide the layer to return to normal. This one is genuinely toggleable, which makes it handy for checking a drawing as a negative without committing.
The Difference layer is the closest thing Procreate has to a live inversion. It only affects what you see on the canvas, so export carefully: if the layer is visible, it will be baked into the exported image.
If your colors inverted by accident
This happens often enough that Procreate's own support community fields the question regularly. Work through these checks in order:
- Undo. A two-finger tap reverses the last action, and a two-finger hold rapidly undoes multiple steps.
- Check Layer Options. Reopen the options for the affected layer. Invert sits close to other frequently tapped items, so an accidental tap is easy.
- Look at the blend mode letter. On each layer thumbnail, a small letter indicates the blend mode. N means Normal. If you see something else, tap it and set it back to Normal.
- Look for a Difference layer. A leftover white Difference layer above everything will invert the whole canvas visually.
- Consider Recolor. If only part of a layer changed, you may have used Recolor with the wrong color selected. Recolor fills the area under your tap with the active color.
- Use the time-lapse. If you cannot undo far enough, export the time-lapse video (Actions > Video > Export Time-lapse video), scrub to a frame before the change, and screenshot it. Import that screenshot as a color reference or a base to paint over.
Duplicating a layer before any destructive operation is the cheapest insurance you have.
Inverting Procreate artwork in your motion pipeline
If you export Procreate art to animate it, you usually do not need to invert in Procreate at all. It is often better to keep the artwork as drawn and invert downstream, where the operation stays adjustable.
- After Effects: Apply Effect > Channel > Invert to a layer and set the channel to RGB so alpha is untouched. Because it is an effect, you can animate, mask, or turn it off. Export from Procreate as a layered PSD to keep your layers separate.
- Premiere Pro: Use the Invert effect, with the channel set appropriately.
- Nuke: Use the Invert node. Mind premultiplication: unpremult before inverting color if the image has alpha, then premult again.
- Blender: In the compositor or shader editor, use an Invert Color node.
- Cinema 4D: Invert inside a shader or in the material's texture settings rather than editing the texture file.
The same principle applies everywhere: use alpha-aware inversion and keep it adjustable so you can revisit the look in review.
Where Styleframe fits after Procreate
Procreate is a strong place to draw keyframes, character designs, textures, and style references. Getting that artwork moving is a separate problem, and that is where Styleframe (styleframe.ai) can help. It is an AI video and motion tool built around artistic control rather than one-click generation.
A practical flow looks like this:
- Frames-to-Video: Take two or three Procreate frames and use them as keyframes. The generation is driven by the images you give it, not by a text prompt alone.
- Restyle and Ink-and-Paint: Use a Procreate drawing as the style reference and apply that look to footage or renders through reference-driven style transfer.
- 2D-to-3D and Turntable: Turn a flat character or prop illustration into a 3D asset and generate a turntable for reference.
- Remove Background and 4K Upscale: Clean up cutouts and bring output to production-ready 4K.
Every generation is driven by reference images, video clips, and keyframes, and iteration is non-destructive, so you can branch and compare versions instead of overwriting them. Output exports as image sequences, so it drops into your existing After Effects or Nuke comp. An After Effects plugin is on the way. Your inversion, color correction, and compositing stay where they already live.
If you want a negative look in the final piece, keep that decision in the composite: generate or export the clean sequence, then apply the Invert effect or node at comp time.
Quick reference
Invert is a one-tap command, but knowing which kind of inversion you need (layer, mask, selection, or whole canvas) saves a lot of undoing. Keep duplicates, prefer toggleable methods when you are still exploring, and push final inversion decisions into your compositing app when the work is headed for motion.