How to Increase Pressure Sensitivity in Procreate
StyleFrame Team8 min read
To increase pressure sensitivity in Procreate, open Actions (the wrench) → Prefs → Edit Pressure Curve (called Pressure and Smoothing in newer versions) and drag the curve so it rises more steeply at the start. A steeper start means light Apple Pencil touches produce visible marks, so you no longer need to press hard. For brush-specific changes, open Brush Studio → Apple Pencil → Pressure and raise the Size or Opacity sliders. If pressure isn't registering at all, reset the curve, re-pair the Pencil, and confirm you're using a supported stylus.
Understand the two places pressure is controlled
Procreate splits pressure behavior into two layers. Knowing which one you're editing saves a lot of confusion.
- The global pressure curve sits in Actions → Prefs. It changes how every brush interprets your Apple Pencil input.
- Per-brush pressure settings sit in Brush Studio under the Apple Pencil section. They decide what pressure actually does for one brush: change its size, its opacity, or both.
The global curve is a graph. The horizontal axis is how hard you press, from nothing on the left to maximum on the right. The vertical axis is how strongly that pressure affects the brush, from no effect at the bottom to full effect at the top. A default curve is a straight diagonal. If you feel you have to push hard to get a solid mark, the curve is working against you, and reshaping it is the quickest fix.
Step 1: Make the global curve more responsive
- Tap the Actions icon (wrench).
- Go to Prefs.
- Open Edit Pressure Curve (or Pressure and Smoothing).
- Tap the middle of the curve to add a node.
- Drag that node upward a small amount.
Raising the node means the same amount of Pencil pressure now produces a higher effect, so brushes become more visible with a lighter touch. Move in small increments and test after each change by scribbling in a blank canvas. A tiny adjustment is usually enough, and a dramatic curve tends to make the pen feel twitchy.
The steepness at the beginning of the curve matters most. If you sketch with a pencil-style brush and expect a faint gray tone from a feather-light touch, a steeper start gets you there. You can still make very light marks, but building mid-tones takes far less force.
You can also go the other direction. Flattening the start of the curve makes the pen less sensitive, so you need more pressure for the same result. That suits people with a heavy hand or anyone who finds light strokes too faint to control. It's a personal preference, so tune it to your hand rather than copying someone else's settings.
A note on caution
Procreate's own documentation advises against touching the global curve unless you need to, since its brushes are designed to work well for most people out of the box. Changing the curve alters the feel of your brushes. If you do experiment, make small changes and remember that you can reset everything (covered below).
Step 2: Tune pressure per brush in Brush Studio
If one brush feels dull while the others are fine, fix that brush instead of the global curve.
- Tap the brush in your Brush Library to open Brush Studio.
- Select Apple Pencil in the left-hand list.
- Look at the Pressure section at the top.
Here you'll find sliders that tie pressure to specific properties:
- Size: Raise it so that pressing harder makes the stroke thicker. This is what gives you the expressive thin-to-thick line you'd expect from a soft brush tip.
- Opacity: Raise it so that pressing harder makes the stroke more opaque. This is useful for shading and soft pencil effects.
Pushing a slider into negative values inverts the behavior, so a lighter touch makes a thicker line and a harder press makes a thinner one. It's a digital-only trick that's handy for certain stylized effects.
Use Taper for natural line endings
Just below Pressure, the Taper section controls how a stroke starts and ends. If your lines feel blunt or stuck at one thickness, taper settings are often the reason. Tapering lets a stroke begin sharp, swell as you press, and thin again as you lift, which mimics a real brush tip. You can link the start and end tapers if you want them to behave symmetrically. A longer distance to the first node produces a smoother, more gradual transition.
The "it gets thick but won't get thin again" problem
A common complaint is that line width grows with pressure but won't shrink when you ease off, forcing you to start a new stroke. Users who hit this problem found it helped to disable Softness and Size Taper on the brush and then adjust the curve gradually, moving the bottom node of the curve slightly to the right. Fast strokes can also expose the limits of tablet tracking on an iPad compared with graphic tablets for computers, so test your changes at a speed that matches your real linework.
Step 3: Check the smoothing controls
The same Pressure and Smoothing screen has sliders at the top for stabilization. Raising these adds smoothing to all your brushes, which steadies shaky lines but can introduce a slight lag or soften small details. If your strokes feel sluggish after you've raised sensitivity, lower the smoothing before blaming the pressure curve. For clean ink lines, a bit of smoothing helps. For gestural sketching, keep it low.
Step 4: Reset if things feel wrong
If you've made changes that you regret, you can return to the defaults:
- Go to Actions → Prefs → Pressure and Smoothing.
- Scroll to the bottom of the menu.
- Tap Reset all and confirm.
This restores the pressure curve and smoothing values together. Resetting is also the first diagnostic step if pressure suddenly seems off, because a stray node on the curve can mimic a hardware fault.
Troubleshooting: when pressure isn't working at all
If sensitivity is missing rather than just too low, work through this list in order:
- Restart your iPad, then re-pair the Apple Pencil by attaching it to the iPad.
- Test with a basic brush. Make a new canvas, pick a dark color, choose a standard painting brush, and push the sidebar sliders to the top. Confirm the Pencil draws.
- Reset the pressure curve (Actions → Prefs → Edit Pressure Curve → Reset).
- Reset gesture controls (Actions → Prefs → Gesture Controls → General → Reset to Defaults), which can resolve odd input behavior.
- Try a different Apple Pencil if you can borrow one. Procreate pushes the Pencil's pressure and tilt sensors harder than many apps do, so a faulty sensor may look fine elsewhere while failing in Procreate. If yours is under warranty, replacement is the next step.
- Confirm your stylus is supported. Pressure and tilt need a compatible smart stylus. A cheap capacitive pen won't report pressure.
- Know the Pocket limitation. Procreate Pocket on iPhone has no pressure sensitivity. You can manually adjust brush size or opacity while painting to get a similar effect.
Also check that Bluetooth is on and the Pencil is connected, and that the battery isn't depleted. A Pencil that isn't properly paired may behave like a finger.
Practical settings to start with
Rather than hunting for a universal best curve, match the curve to the task:
- Pencil-style sketching: Slightly steeper start so light touches leave tone.
- Inking and lineart: Moderate curve, size pressure enabled, taper tuned, small amount of smoothing.
- Painterly brushes: Opacity pressure raised, curve close to default so you retain a wide dynamic range.
- Heavy-handed drawing: Flatten the start of the curve slightly so you keep control over light marks.
Change one thing at a time, and draw the same test strokes each round: a light-to-heavy squiggle, a fast flick, and a slow curve. That makes the differences easy to compare.
Where this fits in a motion and VFX pipeline
Many motion designers and animators use Procreate for the stage before animation: rough storyboards, character poses, key-art style frames, texture studies, and hand-drawn elements. Pressure response affects the quality of that work directly. Clean tapered linework and controllable shading read well on screen and hold up when the art goes into a compositing or animation pipeline.
The better your source drawing, the more intentional the result, which is one more reason to get your Pencil response dialed in first.
Quick summary
- Increase sensitivity globally by raising the pressure curve in Actions → Prefs → Edit Pressure Curve, with a steeper start for lighter touches.
- Adjust individual brushes in Brush Studio → Apple Pencil using the Size and Opacity pressure sliders, and refine line ends with Taper.
- Lower the smoothing if strokes feel laggy.
- Use Reset all if you overshoot.
- If pressure is dead, restart, re-pair, reset the curve and gestures, and test another Pencil. Remember that Procreate Pocket has no pressure support.
Small, tested adjustments will serve you better than dramatic curve changes, and once the pen feels natural you can stop thinking about settings and focus on the drawing itself.