How to Import Nomad to Procreate
StyleFrame Team8 min read
To import a Nomad sculpt into Procreate, unwrap the UVs in Nomad (decimate first, then use the auto unwrap button), export the model as OBJ with normals enabled, and open that file through Procreate's Import button. Procreate rejects OBJ files without UVs, so the "missing UVs" error almost always means the unwrap step was skipped. To bring the painted model back, export OBJ from Procreate, compress the folder it creates into a zip, and drag the zip into Nomad.
The rest of this guide covers the full round trip, what breaks it, and how to fit the result into a motion or VFX pipeline.
What you need before you start
Procreate's 3D painting depends on UV coordinates, and Nomad does not generate them for every mesh by default. Procreate's team has said that automatic UV mapping isn't planned, so the unwrap has to happen on the Nomad side (or in another app).
Before exporting, check four things:
- The sculpt is at a manageable polygon count. Heavy meshes tend to unwrap badly and make painting sluggish.
- You are finished with topology-changing tools. Voxel remeshing and dynamic topology discard or invalidate UVs. If you plan to return to Nomad after painting, avoid them once the UVs exist.
- The model is one object, or a few clean ones. Complex multi-part scenes are harder to troubleshoot when the import fails.
- Your Nomad version is current. Texture handling has changed across releases, so features described in older forum threads may behave differently now.
Step 1: Unwrap and export from Nomad
- Finish the sculpt, or at least the major forms.
- Decimate the mesh if it is very dense. A lower polygon count usually gives a more reliable unwrap.
- Run the auto unwrap function in Nomad's UV tools.
- Open the export menu, choose OBJ, and make sure normals are included.
- Save the file somewhere Procreate can reach through the Files app, such as iCloud Drive or On My iPad.
A quick way to verify your setup is to test with Nomad's default sphere. Decimate it a couple of times, auto unwrap it, export it as OBJ, and import it into Procreate. If that works, any later failure comes from the specific model, not your process.
Step 2: Import the OBJ into Procreate
- In the Procreate Gallery, tap Import and select the OBJ file.
- Procreate opens it as a 3D canvas.
- You may see an overlapping-UV warning. Users report that this often appears and the model still imports and paints correctly. Treat it as a hint that the UV layout is imperfect, not necessarily a failure.
If Procreate refuses the file and mentions missing UVs, go back to Nomad, confirm the unwrap ran on the final mesh, and re-export.
Step 3: Paint in Procreate
Paint the model as you normally would in Procreate's 3D mode. Because the paint lives in the UV texture, the quality of your unwrap directly affects the result: stretched or tiny islands produce blurry or distorted paint, and seams show where islands split.
Complex sculpts are the main risk. Artists who route models through other apps to generate UVs report that the more intricate the sculpt, the more likely the automatic UVs leave gaps or odd coverage. If a model is highly detailed, consider painting a simplified base and keeping fine detail in geometry or normal maps.
Step 4: Export from Procreate and bring it back into Nomad
- From Procreate, export the model as OBJ. This produces a folder with the OBJ and its texture files.
- Compress the folder into a zip. On iPad you can do this directly in Files by choosing Compress.
- Drag the zip into Nomad.
- Assign a PBR material that uses UVs so the imported textures display on the surface.
Zipping matters because it keeps the OBJ, material file, and textures together. Loose files are easy to separate and lose.
Going back and forth: what works and what doesn't
The main complaint in artist forums is that a round trip erases paint. The cause is predictable: if you change the sculpt in Nomad and re-export it, the new OBJ doesn't carry the textures you painted in Procreate, so Procreate starts from a blank surface.
Here's how to handle the two common situations.
Small sculpt fixes after painting
If you forgot a detail, make the change in Nomad without using voxel remeshing, so the UVs remain intact. Sculpting on the existing mesh preserves the UV layout, and the painted textures stay valid because the UV map hasn't changed.
Returning the edited mesh to Procreate
This is the harder case, because Nomad has no simple way to re-save the whole project as an OBJ with textures attached. A workable approach from the community:
- Export only the OBJ from Nomad into a fresh folder, ideally the same folder as the previous Procreate export.
- Import that OBJ alone into Procreate. Importing the entire Procreate-exported folder doesn't reliably reload the textures.
- Drag your existing textures onto the right channels (color, roughness, metalness). Using the 2D view makes this easier.
Because this depends on the UVs matching exactly, it only works if the edit didn't change the UV layout. If it did, the textures will land in the wrong places and you'll need to repaint or reproject.
One additional option: a reply in a 2023 forum thread said an upcoming update (1.77) would let you project textures back onto the mesh as vertex color. If you have a recent build, check whether that feature suits your case. It is a way to carry painted color back onto a revised mesh, though vertex color is not the same as a full UV-textured material.
Troubleshooting common problems
"Missing UVs" on import. The OBJ has no UV coordinates. Run the unwrap in Nomad, then export again.
Overlapping UV warning. Common with auto unwrap. If the model still opens and paints properly, you can continue. If paint bleeds across unrelated areas, the overlap is likely the cause and the UVs should be redone.
Textures vanish after returning to Nomad. Check that you zipped the full Procreate export, that the material is set up to use UVs, and that the texture slots (color, roughness, metalness) are assigned.
Paint disappears after editing the sculpt. You likely changed topology or re-exported without textures. Reapply textures to the new OBJ as described above, and avoid voxel remeshing after unwrapping.
Unwrap looks broken on a complex model. Auto UVs are the weakest link in this workflow. Forum participants suggest using Blender to create clean manual UVs, or 3D-Coat for automatic UVs, then bringing the model back to the iPad. Other iPad apps with auto UV exist, but their results vary with model complexity, and one forum participant noted a loss of mesh quality along that route.
When this workflow makes sense, and when it doesn't
The Nomad-to-Procreate path suits hand-painted stylized assets, concept sculpts, and quick texture passes where you want to stay on the iPad. It is less suited to production assets that need clean topology, multiple UDIM tiles, or predictable UV layouts. For those, most professional pipelines unwrap and texture in desktop software (Blender, Cinema 4D, or a dedicated texturing tool) and keep the iPad for sketching and look development.
Treat the iPad pass as a way to create a look, not necessarily the final asset.
Getting the result into a motion pipeline
Once the model is painted, you have several routes into the tools you already use:
- After Effects: Render stills or a turntable from Nomad or a DCC app and bring them in as footage. For 3D, use a render from Cinema 4D or Blender instead of relying on AE's own 3D.
- Cinema 4D or Blender: Import the OBJ and texture set, then rebuild the material with your renderer's shader so lighting and reflections match the rest of the scene.
- Nuke: Bring in rendered passes or image sequences and composite as usual.
Keep the Procreate-exported textures at the highest resolution you can manage, since you may need to crop or push in during a shot.
Where Styleframe fits
A painted Nomad model often leaves you with a handful of stills and a look you like but no easy way to extend it into motion. is an AI video and motion tool that you can use at that point alongside your existing pipeline, for example by working from your Procreate paint-over, renders, or painted stills.
Use it as a complement: the Nomad and Procreate steps give you a hand-built asset and look, and Styleframe may help you carry that look into motion when a full 3D setup would take longer than the shot warrants.
Quick checklist
- Finish the sculpt and decimate if needed.
- Run the auto unwrap in Nomad.
- Export OBJ with normals.
- Import the OBJ into Procreate and paint.
- Export OBJ from Procreate, zip the folder, and drag it into Nomad.
- Assign a UV-based PBR material.
- For later edits, avoid voxel remeshing, and reimport only the OBJ before reapplying textures.
- For production assets, use Blender or another desktop tool for UVs, then move into your compositing pipeline.