How to Illustrate Cartoon Characters in Procreate
StyleFrame Team8 min read
To illustrate a cartoon character in Procreate, build the figure from simple shapes, refine the silhouette with Liquify, and place facial guides at cartoon proportions. Then ink on separate layers, fill flat colors with ColorDrop and clipping masks, and add shading last. For animation work, name and separate the layers (eyes, mouth, hair, limbs) and export a layered PSD, so the character can be brought into After Effects without being redrawn.
Set Up the Canvas for Animation, Not Just Illustration
Many Procreate tutorials start with a square canvas of roughly 2500 × 2500 px, and some artists go larger, such as 4000 × 4300 px. For motion work, pick the size by what the character will do on screen. If it will be scaled up, pushed in on with a camera move, or composited into a 4K timeline, start large. Redrawing linework at a higher resolution later is painful.
Before you draw:
- Use an RGB canvas. Your After Effects project will almost certainly be RGB, so there are no surprises on import.
- Set a flat background color. A mid-tone or tinted background is easier on the eyes than pure white, and it is easy to hide before export.
- Build a small palette first. Pick a skin tone, hair color, eye color, an outfit color, and one shadow tone for each. Save them as a Procreate palette so every session uses identical values. This matters a lot when several artists or episodes share a character.
- Pick two or three brushes and stick with them. A textured pencil such as the 6B pencil for sketching, a monoline brush for clean uniform lines, and an inking pen such as the Studio Pen for expressive line weight cover nearly everything.
Step 1: Block the Character With Basic Shapes
Cartoon characters read well because they are built from clear primitives. Start on a sketch layer at low opacity:
- Draw a circle for the head. Hold your pencil at the end of the stroke and Procreate snaps it to a perfect circle (tap a second finger for a true circle rather than an ellipse).
- Add a smaller shape for a snout or jaw, an oval for the torso, and rough lines for limbs.
- Keep the sketch loose. Its only job is to settle pose, proportion, and silhouette.
Check the silhouette early. Fill the whole sketch with solid black on a temporary layer. If you cannot tell what the character is doing, the pose needs work. This is also the cheapest time to change things, because it costs a few strokes rather than a repainted character.
Step 2: Shape the Head and Set Cartoon Proportions
A plain circle makes a fine head, but most appealing characters have a more designed shape. Liquify (under the Adjustments magic wand icon) is the quickest way to get there:
- Set it to Push, with Distortion and Momentum at zero.
- Pull the bottom down into a chin, flatten the sides slightly, and nudge the cheeks outward.
- Tap the wand again to exit when you are happy.
Next, add guidelines on a new layer. For a cute, youthful look, place the eye line below the vertical midpoint of the head rather than at the center, as you would for a realistic face. Larger eyes, a short lower face, and a wide forehead all push the character toward "appealing". Add a second guide for the nose and mouth between the eye line and the chin, and a third above the eyes for the brows. Hold the pencil at the end of the stroke to snap guidelines perfectly horizontal.
If the character is front-facing and symmetrical, turn on the Drawing Guide → Symmetry option (Actions → Canvas → Drawing Guide → Edit Drawing Guide). Mark the layer as Assisted and you only need to draw half the face. Turn it off for hair, ears, and anything asymmetrical, or the character will look stiff.
Step 3: Ink on Separate Layers
Create a new layer above your sketch and start the line art. Procreate's StreamLine setting smooths wobbly strokes, which is useful when you are working on a tablet with a stylus.
Think about animation while inking, not only about the still. Put these on their own layers from the start:
- Head and face outline
- Eyes (and pupils, if they will move independently)
- Eyebrows
- Mouth, plus any alternate mouth shapes you might need
- Hair, split into front and back sections if it will move
- Torso
- Each arm and leg, with hands as separate layers
It is much faster to split these while drawing than to cut them apart afterwards. Leave a little overlap where parts connect, for example the upper arm extending slightly under the shoulder, so rotation in After Effects does not open gaps.
If you want line weight variation, use an inking brush with pressure sensitivity. If you want consistent, vector-like lines that survive scaling and look uniform when animated, use a monoline brush. Either is a legitimate choice; just keep it consistent across the whole character.
Step 4: Add Flat Colors With ColorDrop and Clipping Masks
Procreate's fastest color workflow is dragging a swatch from the color disc into a closed shape (ColorDrop). It only works if the line art has no gaps, so zoom in and close any open shapes first. Then:
- Create a color layer under the line art for each major part, or one flat layer per part if you plan to rig.
- Fill each closed region with a palette color.
- Add a new layer above each fill, choose Clipping Mask, and paint variations such as a lighter belly, toenails, or an outfit trim. Anything you draw is confined to the shape below, so you never have to clean up stray edges.
A neat trick from this workflow: sketch layers can be moved to the top, set to Multiply at reduced opacity, and left as a loose underdrawing. Once you no longer need them, hide them or delete them before export.
Step 5: Shade and Highlight Last
With flats done, add form. Create one clipping-mask layer for shadows set to Multiply, using your saved shadow tones, and another for highlights set to Add or Normal with a pale color. Keep the light source consistent and the shapes simple. Cel-style shading with hard edges holds up better in motion than soft airbrushing, which can shimmer when a part moves.
Finally, add the small details that sell personality, such as a blush on the cheeks, white highlights in the eyes, or a texture on fur or clothing.
Step 6: Fix Problems Without Starting Over
Procreate's editing tools are why many cartoonists work in it:
- Select (Freehand) + Transform lets you circle one body part, such as an oversized foot or a nose in the wrong spot, and resize or move it without touching the rest.
- Three-finger scrub clears a layer when a sketch is hopeless.
- Color picking (tap and hold) samples any color on the canvas so you can match exactly.
- Insert a Photo lets you bring reference or a model sheet onto its own layer for tracing and study.
Build a turnaround reference as you go. Duplicate the finished character, then redraw a side view and a three-quarter view at the same scale. These help any later animator or artist keep the design consistent.
Prepare the Character for After Effects
When the illustration is done, spend ten minutes on handoff:
- Rename every layer. "Layer 47" is useless in a comp with 30 parts. Use clear names like
arm_L_upperandmouth_open_A. - Group related layers (head parts, body parts) and keep clipping masks attached to their base.
- Flatten what doesn't need to move, but keep anything you plan to rig separate.
- Export as a layered PSD (Actions → Share → PSD). Import it in After Effects and check that each part comes in as its own layer.
- Check blend modes. Blend modes may not carry over identically, so confirm in your comp that shading looks the same. If not, bake the shadow into a normal layer.
- Set anchor points at joints (shoulders, elbows, hips, neck) before animating, whether you use a rigging tool or a puppet setup.
Common Mistakes to Avoid
- Gaps in line art that make ColorDrop leak across the whole canvas.
- Merging layers too early, which removes your ability to animate parts.
- Inconsistent line weight between parts drawn in different sessions or with different brushes.
- Too much detail that vanishes or flickers at video resolution.
- No palette discipline, leading to slightly different skin tones across poses.
Quick Workflow Recap
- Set a large RGB canvas and a saved palette.
- Sketch with basic shapes and check the silhouette.
- Refine the head with Liquify and place proportion guides.
- Ink on separate layers, one per movable part.
- Fill flats with ColorDrop, then use clipping masks for detail.
- Add cel-style shading and highlights.
- Name layers, export a PSD, and set anchor points in After Effects.
Follow this order and the character you draw in an afternoon will be ready for rigging and animation.