How to Handletter on Procreate
StyleFrame Team8 min read
Hand lettering on Procreate comes down to five steps: set up a 300 DPI canvas, sketch the composition loosely, ink each letter on its own layer with a pressure-sensitive brush at moderate Streamline, refine the shapes, then add color and shadow before exporting. Hand lettering is drawing letters as shapes rather than writing them, so good handwriting isn't required. The settings that matter most are brush stabilization, stroke endings, and layer organization.
This guide covers the workflow and the common stumbling blocks. It also covers how finished lettering can feed a motion pipeline in After Effects, which is where many of us end up using it.
What You Need Before You Start
- An iPad that supports Apple Pencil. Pressure sensitivity is what produces thick downstrokes and thin upstrokes. A finger works for experiments, but not for brush lettering.
- Procreate. It's a one-time purchase on iPad, with no subscription.
- Optional: a matte screen protector for more friction and control, and a stand for long sessions.
If you're coming from After Effects, expect a different mindset. You're used to non-destructive, parametric control. Procreate is raster, so planning your layers early saves you from repainting later.
Set Up the Canvas
Tap the + in the gallery and create a custom canvas. For lettering that might be printed or reused in a video project, start larger than you think you need.
- Size: 3000 × 2000 px is a comfortable working size for most pieces. For video-only work, you can match your comp (for example, 3840 × 2160).
- DPI: 300 for anything that might be printed.
- Color profile: Choose based on whether the piece will live on a screen or in print. RGB suits screen and video; if a print vendor asks for a different profile, follow their requirements.
Keep in mind that larger canvases reduce your maximum layer count. If you plan to split each letter or word onto separate layers, check the layer limit shown in the canvas settings before committing.
Choose the Right Brush
The brush determines the character of your lettering more than any other setting. There are two basic approaches.
Monoline
A monoline brush produces one consistent stroke width regardless of pressure. It suits modern, clean, geometric lettering, and it's the most forgiving starting point because you don't have to manage pressure.
Pressure-Sensitive Brush Lettering
For calligraphic styles, pick a brush that responds to pressure so you get thin upstrokes and thick downstrokes. The built-in Inking set includes options, and you can install third-party brush sets later. Test any brush with a few loops and a downstroke-upstroke pattern before committing to it.
Treat the brush library as a typographic toolkit. A bold sans, a dry-brush script, and a monoline script all behave differently, so match the brush to the style you've chosen.
Sketch Before You Ink
Skipping the sketch is the most common reason lettering looks stiff.
- Write the phrase out in plain handwriting to see how many words and lines you're working with.
- Make thumbnail layouts. Try stacking, curving, and mixing styles, such as a script for the emotional word and a block style for the supporting words. Spend more time here than feels necessary.
- Sketch in a bright color on its own layer (red works well), then lower that layer's opacity once you've settled on a layout. This keeps your final inking clean against the guide.
- Think in shapes. Treat the word as an illustration with a silhouette. Look at the negative space between letters as carefully as the letters themselves.
Adjust spacing now. Kerning is easier to fix at the sketch stage than after inking, when you'd have to lasso and nudge individual letters.
Ink the Lettering
Create a new layer above your sketch and trace over it with your chosen brush.
Use Streamline to Smooth Curves
Procreate's pressure sensitivity can introduce small wobbles on curves. Open the brush settings, go to Stabilization, and raise Streamline. Around 60% is a reasonable starting point. Higher values smooth more aggressively but make the line lag behind your pencil, and the stroke stops following your natural movement. If a brush feels like it's fighting you, lower the value.
Note that stabilization changes how a brush feels for handwriting-like motion, so use lower values for sketching and higher ones for final inking.
Control Stroke Starts and Ends
Stroke terminations trip up many beginners, especially anyone used to brush pens. A few habits help:
- Pause briefly before lifting the pencil to get a flat, clean end rather than a bump or a point.
- Lift straight up or back into the stroke, not away from it, to avoid tails.
- Pause briefly before dragging at the start if you want a flat top instead of a tapered entry.
- Use gradual pressure when you want a tapered, pointed stroke.
Draw Strokes, Not Outlines
For script and brush styles, draw each stroke in a single confident motion rather than sketching and correcting. If a stroke is wrong, undo it and redraw it. This usually looks better than patching it with the eraser.
Rotate and Reposition Your Hand
Turn the canvas so your hand is always pulling downstrokes toward you. Fighting the natural arm angle is a common cause of shaky curves.
Organize Your Layers
Good layer structure pays off later, especially if the lettering goes to motion.
- One layer for the sketch, hidden or low opacity at the end.
- One layer per word or letter group for final inking, so you can move, scale, or recolor parts independently.
- Separate layers for shadows, highlights, textures, and decorations.
- Name your layers. If the file lands in After Effects later, named layers matter far more than they seem to now.
Use the Selection and Transform tools to reposition words.
Add Color, Depth, and Details
Once the linework is solid, use Alpha Lock (toggle it in the layer menu) to color a layer without bleeding past the strokes. Clipping masks serve the same purpose for textures and gradients.
Common finishing techniques:
- Drop shadows: Duplicate the lettering layer, fill it with a darker color, offset it, and place it underneath.
- Blended color: Use a clipping mask with a soft brush for gradients inside the letters.
- Highlights and texture: Add a clipped layer with a texture brush or grain.
- Flourishes and ligatures: Add them last, after the main letterforms are settled, so they support the words rather than crowd them.
Build a small saved palette for each project so the lettering and any surrounding motion graphics stay color-consistent.
Export for Print, Web, or Motion
Open the share or export options and choose a format based on destination:
- PNG with a transparent background: Hide the background color layer first. This is the simplest option for dropping lettering over footage.
- PSD: Useful if you want to keep layers so you can animate parts separately in After Effects.
- A print-ready format: For print workflows.
- Animated GIF: Procreate can make animated GIFs, handy for a quick write-on test.
If you plan to scale lettering in video, export at a higher resolution than your delivery size. Raster lettering pixelates if you scale it up in a comp.
Common Problems and Quick Fixes
- Wobbly curves: Raise Streamline slightly, slow down, and rotate the canvas.
- Inconsistent thick and thin: Practice pressure drills before inking real words. Consistent weight comes from consistent pressure.
- Letters that don't feel like they belong together: Check baseline, x-height, and slant. Guidelines can help here.
- Messy edges when recoloring: Use Alpha Lock or a clipping mask rather than painting over the lines.
- Overworking a piece: Keep your sketch honest. If the composition isn't working in the thumbnail, inking won't rescue it.
Taking Hand Lettering Into a Motion Pipeline
For motion designers, lettering is usually the start of a shot, not the end deliverable. A few practical ways to carry it forward:
- After Effects: Import your exported lettering and animate it, for example with a reveal for a write-on effect.
- Frame-by-frame: Draw the write-on in Procreate as an animation and export it for an authentic hand-drawn feel.
- Style reference: Use your lettering as a visual reference for how a title or environment should look.
The lettering you made in Procreate remains the creative source, whatever tools you use to extend it into moving imagery.
Practice Plan for Your First Week
- Day 1–2: Drills: straight strokes, loops, ovals, and downstroke-upstroke rhythm.
- Day 3: Letter the alphabet in one style with a monoline brush.
- Day 4: Repeat with a pressure-sensitive brush.
- Day 5: Build a short phrase with three thumbnails, then pick one.
- Day 6: Ink and color it with layered shadows.
- Day 7: Export a transparent PNG and test it over a video clip in your usual compositor.
Lettering improves with repetition, and the real skill is seeing letterforms as designed shapes. Start with the setup and brush choices above, build a layer structure you can reuse, and treat export as part of the design process if your work ends up in motion.