How to Grayscale Procreate
StyleFrame Team8 min read
Procreate has no one-tap grayscale button, so the most reliable method is a non-destructive check layer. Add a new top layer, fill it with mid-grey, and set its blend mode to Saturation (or Hue or Color). Toggle that layer on and off to see your values without touching the artwork. For a faster system-wide check, set the iPad's Accessibility Shortcut to Color Filters and triple-press the top button. To bake in a permanent black-and-white version, use a duplicated layer set to Luminosity.
Which Procreate grayscale method should you use?
The right method depends on whether you want a temporary value check or a permanent conversion.
Method 1: Build a non-destructive grayscale check layer
This is a commonly recommended method among Procreate users, because it behaves like an adjustment layer. You can switch it on and off at any point and your painting stays untouched.
- Open the Layers panel and add a new layer at the very top of the stack.
- Pick a mid-grey. The Values tab in the color popover gives you 50% grey, or you can snap the reticule on the disc picker.
- Fill the layer with that grey (drag the color swatch onto it, or use ColorDrop).
- Tap the layer's N and change the blend mode to Saturation. Hue and Color also work, and it is worth testing all three to see which reads most cleanly for your image.
- Toggle the layer's visibility whenever you want to check your values.
Group this layer with anything else you use for checking, and keep it above everything else. If it ends up below a layer you added later, that layer will still show in color.
One caveat: the exact fill color matters less than you might expect. Artists testing this approach found that white, mid-grey, or darker greys all produced essentially the same result. The grey you see comes from the conversion itself, not from the fill.
Method 2: Use the iPad Accessibility Shortcut
Procreate doesn't offer a grayscale toggle for the canvas or the Reference window. Users have requested one, and the Procreate team has said it may expand the Reference Companion in future, but don't count on it. Check your current version's release notes. In the meantime, iPadOS has a system-level option that works in every app:
- Open Settings > Accessibility > Display & Text Size > Color Filters and enable it. Choose the Grayscale filter.
- Go back to Settings > Accessibility > Accessibility Shortcut and select Color Filters.
- Triple-press the top (power) button, or the Home button on devices that have one, to toggle grayscale on and off.
Menu names shift slightly between iPadOS versions, so use the Settings search if you can't find them.
The advantages are speed and the fact that it works on reference images, screenshots, and anything else on screen. The downsides, as artists have pointed out, are:
- You can't adjust colors on the canvas and watch the values update in a separate view, because the entire screen is grayscale.
- Pressing the button too slowly can register as a double press and trigger something else.
- It's a system filter, so it can't be exported or baked into a file.
It's best for quick sanity checks. For anything you need to keep, use a layer-based method.
Method 3: Convert to grayscale with a Luminosity layer stack
When you need an actual black-and-white image, such as a value study, a reference for a lighting pass, or a matte, use the Luminosity approach.
- Duplicate the layer you want to convert (or flatten a copy of your canvas first with Actions > Add > Copy canvas).
- Add a new layer and fill it with white.
- Drag the white layer between the original and the duplicate.
- Set the top duplicate's blend mode to Luminosity. It's at the bottom of the blend mode list, in the same group as Hue, Saturation, and Color.
- Pinch the three layers together to merge them into one grayscale layer.
If you'd rather keep the result switchable, put the duplicate and the white layer into a group and toggle the group instead of merging. You'll need to redo the Copy canvas step after painting new work.
Method 4: Desaturate with Adjustments
The fastest destructive route is Adjustments > Hue, Saturation, Brightness, then dragging Saturation all the way to the left. It's useful for converting a single imported photo or a reference layer.
Duplicate the layer first. Once you've committed the adjustment and kept working, getting the original color back is a chore.
Why your grayscale values look "wrong"
A common complaint is that after desaturating, a vivid color such as a saturated orange suddenly looks much darker. People often assume the tool is broken. It isn't.
Take an orange of roughly hex #ea8b5b (R 234, G 139, B 91). In HSB terms its brightness is high, around 92%, because the red channel is near maximum. But grayscale conversion doesn't use HSB brightness. It weights the channels by how bright the eye perceives them, with green contributing the most and blue the least. Using the classic luma weights, that orange works out to about 162, or #a2a2a2, which is roughly 64% grey. That matches what Procreate users reported when they tested the color across versions.
What this means in practice:
- The "value drop" is the correct perceptual value, not an error. The saturated orange isn't as light as its brightness slider suggested.
- Don't trust the HSB brightness slider for judging how a color will read in black and white.
- Different methods give nearly identical results for this reason. The Saturation blend, the Luminosity stack, and the Adjustments slider all converge on similar greys.
- Check at the size you'll deliver. Values that read clearly full-screen can merge at thumbnail scale.
If you need a real number, flatten a copy using the Luminosity method and sample it with the color picker.
Going from grayscale back to color
Many artists paint in grayscale deliberately, locking in composition and values before adding color. The usual order is drawing, then a notan or value pass, then color and chroma.
To add color over a grayscale painting:
- Add a new layer above it and set the blend mode to Color.
- Paint with a soft brush, using a palette sampled from your reference if you have one.
- Add a Multiply layer to deepen shadows and an Overlay layer to lift highlights.
Procreate can't turn a grayscale image back into its original color on its own. If you want color in only part of an image, keep the original color layer underneath the grayscale one. Then make a selection on the grayscale layer, or use the Eraser, and remove the grey where you want color to show through.
Using grayscale checks in a motion pipeline
If you're a motion designer, illustrator-turned-animator, or VFX artist, Procreate often sits upstream of the real work. It's where style frames, character boards, and texture studies get painted before they move into your compositing or 3D tools. A few habits make that handoff cleaner:
- Export the check layer separately. Hide it before exporting finals so you don't ship a grey image by accident. Export a grayscale version deliberately when you want one as a value reference.
- Keep layers where it matters. Export layered files when your compositor needs separate elements, and flat images for single frames.
- Verify values in your compositing tool too. A black-and-white or desaturation adjustment layer gives you the same kind of toggle on the final comp, which matters more than how a frame looked on an iPad.
- Use the value study as an anchor. A clean grayscale pass is also one of the most useful reference images you can give a stylization or generation tool, because it communicates structure and light without color noise.
That last point is where Styleframe fits: a Procreate painting that has passed its value check can serve as a reference image for your work there. The painter's value discipline stays with you, and the grading, compositing, and finishing happen where they always have.
Troubleshooting common problems
The check layer doesn't turn everything grey. Make sure it's the top layer, and that no layer above it uses a blend mode that interferes. Also confirm that the blend mode is Saturation, Hue, or Color rather than Normal.
The iPad stays in grayscale. Triple-press the button again to toggle it off. If that doesn't work, disable Color Filters in Accessibility settings.
My exported file is grey. The check layer was visible at export. Hide it, or move it to a separate group you can exclude.
The converted image looks flat. Grayscale conversion doesn't add contrast. Use a contrast adjustment on the converted copy, not on your original, to push the values apart.
The greys don't match my other software. Different apps and app versions can give slightly different results, and color-managed workflows can shift results further. A difference of a couple of values (such as 160 versus 162) is normal. Judge the relationships between values, not the exact numbers.
Quick recap
For a live value check, use a top layer filled with grey and set to Saturation. For a one-press system check, set up the iPad Accessibility Shortcut. For a deliverable black-and-white image, use the Luminosity stack on a duplicate. And remember that when a colorful passage looks darker in grayscale, that's the real perceptual value, which is exactly the information you were trying to find.