How to Gradient Fill in Procreate
StyleFrame Team8 min read
Procreate has no dedicated gradient tool in many versions, so you build a gradient fill by blending colors on a layer and then confining it to a shape. The most reliable method is to paint bands of color, apply Adjustments > Gaussian Blur > Layer to smooth them, then clip that layer to your shape or drop it into an alpha-locked layer. You can also use a feathered selection with Color Fill, a soft airbrush, or an imported black-to-transparent PNG as a reusable gradient layer.
This guide covers each method, when to use it, and how to hand the result to an After Effects or compositing pipeline without banding or color surprises.
What "gradient fill" means in Procreate
In Photoshop or After Effects, a gradient fill is a procedural ramp with start and end points, a color stop list, and an opacity channel. Procreate is a raster painting app, so you make the gradient from pixels instead. The results are painterly and quick to art-direct. They are also baked, so you can't edit the stops afterward.
Check your version first. The methods below work regardless, and artists have relied on them for years.
Method 1: Gaussian blur gradient (most controllable)
This is the workhorse method, and it is the best fit for linear and radial ramps.
- Pick your first color and fill an entire layer with it (drag the color swatch onto the canvas, or use ColorDrop).
- Add a new layer, pick a second color, and fill roughly half the canvas with a hard-edged shape.
- Tap Adjustments > Gaussian Blur and choose Layer.
- Drag your finger or Pencil left and right to set the blur amount. More blur means a longer, softer transition.
- Pinch the layers together to merge them into one gradient layer.
For multi-stop gradients, paint every color band on a single layer before blurring. Keep the bands wide, because blur eats into narrow stripes and muddies the colors.
Radial gradients: draw concentric circles instead of bands, with the outermost color filling the edges and the brightest color in the center. Blur the layer and you get a radial ramp. Adjust the circles' size and position to move the "origin," which is a control forum users have said Procreate lacks.
Tip: if the blur pulls in the canvas edge and creates a dark or light rim, extend your color bands past the edges of the canvas before blurring.
Method 2: Clipping mask (gradient inside a shape)
This is the cleanest way to fill a specific shape with a gradient.
- Draw or fill your shape on its own layer (a cloud, a title card, a character's cape).
- Create a gradient layer using Method 1 and place it directly above the shape layer.
- Tap the gradient layer and choose Clipping Mask.
The gradient now shows only where the shape has pixels. Because it's non-destructive, you can move the gradient layer with the Transform tool to reposition the ramp inside the shape, change its blend mode, or swap in a different gradient without redrawing the shape.
The same trick works for texture. Some artists clip a noise-brushed layer to a color-filled layer to get glow and grain in one pass.
Method 3: Alpha Lock and fill
Alpha Lock restricts painting to pixels that already exist on a layer, which makes it a good way to recolor a gradient.
- Import or create a gradient layer that runs from a solid color to transparent.
- Turn on Alpha Lock for that layer.
- Pick any color and fill the layer (drag the swatch onto the canvas).
The ramp's transparency is preserved while the color changes, so one black-to-transparent asset can serve as many colored gradients. This is also how artists build reusable gradient libraries. You make black-to-transparent PNGs at your canvas dimensions, import them with the Insert a Photo action, and then scale, rotate, and recolor them as needed.
A few useful behaviors:
- Stacking duplicates of a transparent gradient layer tightens the transition, because the layers are additive. Lowering the opacity on the extra layers gives you in-between widths.
- Setting a black gradient layer to Multiply shades everything beneath it, which is a quick way to add a vignette or darker lower third.
- Other blend modes can introduce banding, so inspect the result at 100% zoom.
- The Eraser removes gradient data permanently, but refilling with Alpha Lock on restores a single-color-to-transparent ramp.
Method 4: Selection with Feather and Color Fill
If you want a gradient confined to an area without clipping, use a feathered selection.
- Fill a layer with your base color.
- Tap the Selection tool and draw a selection over the area that should take the second color.
- Use the Feather slider to soften the selection edge.
- Pick the second color and apply Color Fill, or drag the swatch into the selection.
A large feather value creates a long, smooth falloff. It's a good approach for skies, glows behind a character, or a horizon fade.
Method 5: Soft brush gradients
The Soft Brush in the Airbrushing set is less precise, but it follows curves, which suits organic shading.
- Fill the layer with your base color.
- Choose a second color and select Soft Brush at a large size.
- Zoom out, start your stroke off the canvas, and sweep across slowly.
- If it looks streaky, apply a small Gaussian blur or use the Smudge tool, then merge.
Use this for atmospheric lighting, rim light suggestions, and anything where a straight ramp would look mechanical.
Method 6: Build it elsewhere and paste it in
Procreate's older community workarounds are still valid. Vector apps such as Inkpad can generate gradient fills on shapes and text with adjustable origin and spread, and you can copy and paste the result into Procreate. This helps when you need a precise vector-style ramp that blurred bands can't match. The tradeoff is a round trip between apps, and the result lands as a flat raster layer.
Which method should you choose?
Avoid banding before it reaches your timeline
Smooth gradients are the most likely place for banding to show up, and compression and grading make it worse. A subtle dark ramp can show visible steps once it's graded in After Effects or compressed for delivery.
- Work large. Create your canvas at the final delivery resolution. Stretching a small gradient exaggerates steps.
- Add grain. A light noise or grain layer in Procreate, or a grain effect in After Effects, breaks up banding before it's visible.
- Export deliberately. PNG preserves alpha for overlays and lower-third style assets.
- Check color profile. Make sure your canvas profile matches your comp's working space so the gradient doesn't shift when you import it.
- Know when to rebuild. If the gradient needs to animate (shifting stops, moving origin, changing color over time), recreate it procedurally in After Effects. Use the Procreate version as the visual reference rather than the final asset.
Using Procreate gradients in a motion pipeline
For motion work, Procreate is often a style-frame and design tool. You can paint a background with a custom gradient, define a color script, or build a texture in Procreate, then export layers to After Effects, Premiere Pro, or Nuke. Cinema 4D and Blender users can bring the same PNGs in as backdrops, luminance textures, or reference.
When a style frame needs to become moving footage, is an AI video and motion tool built for artistic control rather than one-click output. You can use your Procreate gradient artwork as a reference image to steer a Restyle or Ink-and-Paint pass, so the look of your palette carries through to the generated result. You can also set your painted frames as keyframes for Frames-to-Video, so the motion between your designs is guided by your own artwork. Every generation is driven by reference images, video clips, and keyframes. Iteration is non-destructive.
The result can then go into your After Effects or Nuke comp, where you keep your usual compositing, grading, and grain. Other tools in the set, such as Remove Background, 2D-to-3D, and Turntable, are useful when a painted character or prop needs isolating or turning around, but the gradient workflow above doesn't depend on them.
Common mistakes
- Blurring a layer with narrow stripes. The colors muddy. Use wider bands.
- Forgetting to merge. Clipping masks and Alpha Lock behave unpredictably if the gradient is split across layers.
- Erasing a gradient layer. The eraser permanently removes ramp data. Use a mask or refill with Alpha Lock instead.
- Baking too early. Keep the gradient on its own layer until the design is locked, so you can still reposition it.
- Treating a painted gradient as animatable. If it needs to move, rebuild it procedurally in your compositing app.
Quick recap
To gradient fill in Procreate, paint blocks of color, blur them with Gaussian Blur set to Layer, and clip the result to your shape. Use Alpha Lock with a transparent gradient PNG when you need a reusable, recolorable ramp. Use a feathered selection for quick falloffs and the Soft Brush for painterly work. When it's time to move to motion, mind the banding risk, add grain, and rebuild anything that has to animate in After Effects.