How to Get Textured Paper in Procreate
StyleFrame Team8 min read
To get textured paper in Procreate, import a paper texture image into your canvas, drag it to the top of the layer stack, and set its blend mode to Multiply. Then lower the opacity until the paper grain shows without muddying your colors. You can add the image through Actions > Add > Insert a photo or Insert a file, or by dragging it in from Files, Photos, or a browser in Split View. For a more tactile result, desaturate the texture first and stack a second copy on Overlay.
Method 1: Add a Paper Texture as an Overlay Layer
This is the fastest route and works on finished artwork or work in progress.
- Open your canvas. Check its pixel dimensions. The texture should be at least as large as the canvas, or it will soften when scaled up.
- Insert the texture. Tap Actions (the wrench) > Add > Insert a photo (for your camera roll) or Insert a file (for Files or iCloud). You can also open Procreate beside another app and drag the image onto the canvas.
- Fit it to the canvas. Use the Transform tool with Uniform selected to scale and rotate the texture until it covers every edge. Rotating by 90 degrees is a quick way to match a landscape texture to a portrait canvas.
- Move it to the top. The texture layer needs to sit above everything you want textured. Anything above it stays clean.
- Set the blend mode. Tap the "N" on the layer and choose Multiply. Multiply darkens by combining the layer with what's underneath: white has no effect and darker areas deepen. Paper fibers and shadows therefore show through while the bright paper tone disappears.
- Adjust opacity. Use the layer's opacity slider. The right amount depends on how coarse the paper is, so lower it until the grain shows without overpowering your art.
Layers you add below the texture afterward are textured too, so you can keep painting without redoing the effect.
Fix Dull or Tinted Colors
The most common complaint with texture overlays is that artwork looks gray or yellowed. Any texture layer will shift the colors underneath it to some degree, since otherwise it would be invisible, but you can control how much.
- Desaturate the texture. Select the texture layer, open Adjustments > Hue, Saturation, Brightness, and pull saturation down. A cream or kraft scan will otherwise tint your whole illustration.
- Brighten before multiplying. Raise brightness slightly on the texture layer. A lighter paper darkens your art less.
- Stack Multiply and Overlay. Duplicate the texture layer. Keep one on Multiply to make the grain visible, and set the other to Overlay to restore some of the contrast and brightness. Keep both at low opacity, often around 10%, for a subtle effect.
- Try Soft Light. If Overlay feels harsh, Soft Light gives a gentler version of the same lift.
- Use Curves if needed. A small Curves adjustment on the texture layer can pull the midtones up without touching your artwork.
If the paper's warm tone is what you want, leave it in. A tinted texture on Multiply can make flat digital color feel like ink on aged stock.
Method 2: Use Paper as the Base and Control Its Color
Instead of overlaying a texture on top, you can build the artwork on top of it.
- Insert the texture and place it directly above the Background Color layer.
- Set it to Multiply (or leave it Normal if you want the paper's own color).
- Change the Background Color layer to shift the paper tone. With the texture on Multiply, a different background color gives you a different stock without hunting for new scans.
- Draw on layers above the texture.
The trade-off is that your art sits on top of the paper rather than being modulated by it, so it doesn't pick up grain automatically. Many illustrators combine the two: paper at the bottom for tone, a second texture layer at the top set to Multiply for tooth in the ink and color.
Method 3: Get Texture While You Draw With Grain
If you want paper tooth to appear in the stroke rather than over the whole image, use brushes with grain. Some brushes let you adjust their grain settings. A pencil or charcoal brush whose grain behaves like the paper surface gives a more convincing result than a flat overlay, because the texture interacts with pressure and stroke density.
Grain is best for sketching and traditional-media looks. Overlays are better for unifying a finished piece. Many finished illustrations use both.
Where to Find Paper Textures
You have a few reliable options:
- Free texture packs. Illustrators regularly share paper and canvas packs, often as high-resolution PNGs sized for iPad canvases. One shared set uses 4098 x 3072 pixels at 300 dpi, a size that fits a 12.9-inch iPad Pro screen well.
- Stock photo sites. Sites like Unsplash have photographs of paper that work with Multiply. Pick evenly lit shots without strong shadows or perspective.
- Paid packs. Commercial packs made from scanned archival paper can be seamless and tile to any canvas size. They're worth it if you want consistency across many projects.
- Your own scans. Scan watercolor paper, newsprint, kraft, or a cheap sketchbook at a high resolution. Scan a few sheets with different lighting and keep the flattest ones.
What to look for in a texture
- Even lighting. Uneven shadows will show up as vignettes or blotches over your art.
- Sufficient resolution. Match or exceed your canvas size. Stretching a small texture makes the grain look blurry.
- Seamlessness. If your canvas is bigger than the texture, you'll need a tileable one or you'll see repeat seams.
- Low color cast. Neutral grays and warm whites are easier to work with than strongly colored stock.
Tiling a smaller texture
If the texture is smaller than the canvas, duplicate the layer, use snapping to align the edges on the Transform tool, then merge the copies into one layer. This only looks clean with a seamless texture. Otherwise, use a single large image.
Quick Troubleshooting
- Texture is invisible. Check that the layer is above the artwork and that opacity isn't near zero. A very white texture on Multiply has almost no visible effect, so try Overlay or a darker texture.
- Colors look muddy. Desaturate the texture and lower opacity, or switch to Soft Light.
- Grain looks blurry. The texture is too small for the canvas. Use a higher-resolution file.
- Texture covers parts you want clean. Group the layers you want textured below it, and keep the clean elements above, or erase or mask part of the texture layer.
- Weird edges after transforming. Turn on snapping, and check that the texture extends past the canvas edges.
Taking Procreate Textures Into a Motion Pipeline
For motion designers and animators, paper texture often matters beyond a still illustration. If you're building cutout-style animation, hand-drawn elements, or title cards, a few habits will save time.
Keep texture separate when you can. Export your artwork without the paper layer (or export the texture layer separately as well). Then in After Effects, place the texture over your comp with a Multiply or Overlay blend mode, and tune opacity and levels non-destructively. Baking the texture into every asset makes later changes harder, and it can double up if you apply paper again at comp level.
Decide whether the texture moves. A fixed paper texture over moving art reads as a surface, like a camera over a table. Texture that moves with each element reads as printed or painted stickers. For hand-drawn looks, some animators swap between a few texture variations at a low frame rate to get a boiling feel. Test both in your comp before committing.
Export at production resolution. Export PNG or PSD from Procreate at the canvas size you need for delivery, and plan canvas size before you start. Upscaling a textured image later softens the grain.
Use the same texture across assets. Consistent paper keeps a set of illustrations looking like they belong together.
Where Styleframe Fits
Procreate gets you a textured still. If you need that look to carry through moving footage or a sequence of frames, Styleframe is an AI video and motion tool built for artistic control, and it can pick up where your illustration leaves off. You can use your textured Procreate artwork as a reference image for Restyle or Ink-and-Paint, which are reference-driven style transfer tools, so the paper-and-ink feel guides how footage or generated frames look rather than a prompt alone. With keyframe-driven Frames-to-Video, you set the start and end frames yourself and the motion is generated between them. Generations are driven by your reference images, clips, and keyframes, iteration is non-destructive, and output goes up to 4K, with a 4K Upscale tool for finishing.
It also fits an existing pipeline instead of replacing it. Styleframe exports image sequences, so you can bring results into After Effects or Nuke, add your paper texture layer, and finish the composite as you normally would. For other jobs, 2D-to-3D, Turntable, and Remove Background are there when you need to extract or rotate a textured element.
Summary
Textured paper in Procreate comes down to a good texture file and the right blend mode. Insert a high-resolution paper image, place it above your art, use Multiply, then tame it with desaturation, opacity, and an optional Overlay or Soft Light copy. Use grain-based brushes when you want tooth in the strokes themselves. If your work is headed to motion, keep the texture on its own layer so you can control it in After Effects or Nuke.