How to Get Symmetrical Lines in Procreate
StyleFrame Team8 min read
To get symmetrical lines in Procreate, open Actions → Canvas, turn on Drawing Guide, tap Edit Drawing Guide, choose Symmetry, and tap Done. Then make sure Drawing Assist is switched on for the layer you're drawing on, because symmetry only applies to layers marked "Assisted." Pick Vertical, Horizontal, Quadrant, or Radial mode, and choose Mirror or Rotational behavior, depending on how you want your strokes reflected.
Set up the Symmetry Guide step by step
- Tap the wrench icon (Actions) and go to Canvas.
- Toggle Drawing Guide on. A default grid appears.
- Tap Edit Drawing Guide.
- Select Symmetry from the options along the bottom of the screen.
- Tap Done.
A vertical guideline now runs down the center of the canvas. Anything you draw on one side is reproduced in real time on the other. On Procreate Pocket, the path is slightly different: expand the top toolbar with the ellipsis, go to Actions → Canvas, and tap Symmetry. Tap Edit Drawing Guides to adjust it.
Turn on Drawing Assist for each layer
The most common reason symmetry "doesn't work" is that the active layer isn't assisted. Your first layer usually shows the word "Assisted" under its name; a new layer you add afterward does not. On a non-assisted layer, you draw normally and nothing mirrors.
To fix it, tap the layer and choose Drawing Assist. The reverse problem exists too: if strokes are mirroring when you didn't expect them to, the layer may still have Assisted on while the guide is hidden. Checking this toggle is the first troubleshooting step either way.
Choose the right symmetry mode
Procreate offers four symmetry types. Pick based on the structure of what you're drawing.
- Vertical: A line down the middle. Best for faces, symmetrical logos, wings, vehicles, and any front-on subject.
- Horizontal: A line across the middle, mirroring top to bottom. Useful for reflections in water or glass.
- Quadrant: Both vertical and horizontal guides. A stroke in one quadrant repeats in all four, which suits badges, frames, and ornamental borders.
- Radial: Eight segments built from horizontal, vertical, and diagonal guides. Draw in one slice and it repeats in the rest, which suits mandalas, snowflakes, and kaleidoscopic patterns.
To switch modes, return to Actions → Canvas → Edit Drawing Guide, open the options, and select a different symmetry type. The readout at the bottom of the settings shows which one is active.
Mirror vs. Rotational symmetry
New guides default to Mirror symmetry: strokes are reflected and flipped across the guideline, like a mirror standing on the axis. Rotational symmetry reflects and rotates the stroke, so the copy flips both horizontally and vertically at once. Toggle it in the guide options and test both with a quick scribble; the difference is easier to see than to describe.
Use Mirror for anything that should read as left/right or top/bottom twins. Use Rotational for pinwheel-style designs, loaders, and spinning emblems where each segment should look like a turned copy rather than a reflection.
Move, rotate, and style the guide
The guide doesn't have to sit dead center.
- Blue node (position): Drag it to move the whole guide across the canvas.
- Green node (rotation): Drag it to rotate the guide lines, which produces mirrored results at an angle.
- Reset: Tap either node, then tap Reset to return the guide to its default position.
This matters for off-center compositions. If your subject sits in the right third of the frame, shift the axis to run through the subject instead of the canvas. For a tilted symmetrical element, such as a diagonal shard or a banked emblem, rotate the axis rather than rotating the finished art, which would resample your pixels.
You can also adjust the guide's color, opacity, and thickness so it stays visible against your artwork. One gotcha: if you set the color to white or the opacity too low, the line can effectively disappear. The guide is still active, but you'll draw blind. If your line vanishes, check those sliders first.
Get cleaner, more accurate symmetrical lines
Symmetry is automatic, but line quality still depends on your technique. A few habits keep the mirrored result tidy.
Stabilize your strokes. Mirrored wobble is twice as noticeable as single wobble. Use your brush's stabilization settings for long contours. Slow, confident strokes beat fast, corrected ones.
Use QuickShape for straight lines and perfect curves. Draw a line or circle and hold at the end of the stroke; Procreate snaps it to a clean shape. This is the fastest route to geometric marks.
Draw across the axis deliberately. Strokes that cross the guideline are reflected as well, so a line that crosses the center produces a mirrored overlap. Decide whether you want a continuous shape through the center or two separate halves that meet at it, and plan your stroke ends accordingly.
Keep symmetric and asymmetric elements on separate layers. Real subjects usually need some asymmetry: a hair part, a scar, a lighting accent. Put the symmetric base on an assisted layer and the asymmetric details on a normal layer where Drawing Assist is off. This also keeps edits non-destructive.
Check the axis against the canvas. If the guide is slightly off-center, the artwork will be too. When you need exact symmetry around the canvas center, hit Reset before you start rather than eyeballing it.
Mirror manually when you only need it once
If you don't want a live guide, you can duplicate a layer, use the Transform tool to flip it horizontally or vertically, and align the halves. This is slower, but it leaves you with two independent layers, which helps when each half needs to animate separately later.
Symmetry guides vs. other drawing guides
The Drawing Guide menu also includes 2D Grid, Isometric, and Perspective modes. They're different tools for different problems. Grid and isometric help with alignment and angle consistency; perspective helps with vanishing points. Symmetry is about duplication across an axis. Switch between them as the drawing demands. For something like an isometric symmetrical object, you may block in structure with the isometric guide and then switch to symmetry for the ornamental detail.
Bringing symmetrical Procreate art into a motion pipeline
For motion designers and VFX artists, Procreate is often where a mark, texture, or character design starts before it moves into After Effects, Cinema 4D, or Blender. A few prep choices make the handoff smoother.
- Work large. Set your canvas size to match your delivery resolution or higher, within what your device allows. Symmetric designs are often scaled up in comp, and resampling softens crisp mirrored edges.
- Separate layers. Keep the symmetrical base, details, and color fills on distinct layers, and hide the background. Export as PSD to preserve layers, or PNG with transparency for single elements.
- Delete or hide the guide before exporting. Confirm in your exported file that no guide lines appear before you build on it.
- Mind the center seam. On a mirrored design, check the center line at 100% zoom for doubled strokes or small gaps before you rig or animate it.
Where Styleframe fits
Once you have a clean symmetrical piece, you may want to push it into motion or extend it into other forms. Styleframe is an AI video and motion tool built for artistic control rather than one-click output. Every generation is driven by your own reference images, video clips, and keyframes, and iteration is non-destructive, so your Procreate artwork stays the source of truth.
A few practical uses with symmetrical art:
- Frames-to-Video: Use two Procreate frames, for example a closed and an open version of a mandala, as start and end keyframes, and generate the motion between them.
- Restyle and Ink-and-Paint: Use reference-driven style transfer to apply a specific look to footage or stills, with your own artwork as the reference.
- Remove Background: Cut out a flattened export when you don't have clean layers.
- 2D-to-3D and Turntable: Turn a front-facing symmetrical design, like a mascot or emblem, into a 3D-style object and rotate around it.
- 4K Upscale: Bring the result up to production-ready 4K.
Symmetry in generated output isn't guaranteed the way it is with Procreate's live guide, so inspect results against your original axis and fix any drift in compositing. You can then bring the results into your usual compositing, tracking, and finishing workflow.
Quick troubleshooting
- Nothing mirrors: The active layer isn't assisted. Tap the layer and enable Drawing Assist.
- Strokes mirror with no visible guide: Assisted Drawing is on for the layer. Turn it off or re-enable the guide.
- Guide line is invisible: Check color, opacity, and thickness; a white or fully transparent line is easy to set by accident.
- Mirror looks wrong, like it's turned instead of flipped: Rotational symmetry is on. Toggle it off for a true mirror.
- Axis in the wrong place: Drag the blue node to reposition, or tap a node and choose Reset.
Summary
Symmetrical lines in Procreate come down to a short routine: enable the Drawing Guide, choose Symmetry, pick the mode that fits your subject, confirm Drawing Assist on the layer, and position the axis where the design needs it. Add stabilization and QuickShape for clean strokes, keep asymmetric details on their own layers, and export at a resolution and layer structure that holds up in your compositing pipeline.