How to Get Rid of Pixelation in Procreate
StyleFrame Team8 min read
Pixelation in Procreate almost always comes from too few pixels on the canvas, repeated scaling of raster layers, or a lossy export. To fix it, start new work on a canvas with far more pixels (around 3000 × 3000 or larger for crisp line art), switch Transform interpolation from Nearest Neighbor to Bilinear or Bicubic, avoid enlarging layers after you draw them, and export as PNG or PSD instead of JPEG. Procreate is a raster app, so you can never remove pixels entirely, but you can push them past the point where anyone sees them.
Why Procreate Art Looks Pixelated
Procreate stores your drawing as a grid of pixels. Every stroke you draw is rendered into that grid, so the pixel count of the canvas sets a hard ceiling on how sharp a line can be. When you zoom in, or when the artwork is displayed larger than the canvas's native size, each pixel gets stretched and the edges break apart.
Most complaints trace back to one of four causes:
- The canvas has too few pixels for the size you're viewing or delivering.
- Layers were scaled, rotated, or warped after drawing.
- The brush is textured or soft when you want a clean edge.
- The export format compressed the image or flattened it badly.
Work through them in that order, because the first one causes the most damage and can't be repaired later.
Fix 1: Start With More Pixels
Check your canvas dimensions in pixels, not inches. A small canvas is the most common reason crisp-looking strokes turn jagged under zoom.
The 1500 px canvas is fine for a social post but will look soft on a poster or when zoomed. The 3000 px canvas is a sensible floor for clean line art. For anything you plan to crop, reframe, or print large, go bigger.
To put the numbers in context, an iPad Pro screen is 2732 × 2048 pixels. A canvas of roughly 1700 × 1900 pixels already has to be stretched past 100% to fill that screen, so it looks soft before you even zoom in. If your canvas is smaller than the display you're drawing on, pixelation is guaranteed.
To check your current canvas, look up its pixel dimensions in Procreate's canvas settings. If they're too small, you can resize the canvas, but enlarging an existing drawing won't add detail. The reliable fix is to create a new, larger canvas and redraw or retrace the linework there.
Fix 2: Stop Treating DPI as the Fix
DPI is a print instruction. It tells a printer how many pixels to place per inch of paper. It doesn't change how many pixels exist in your file. If you create a canvas in pixels and then raise the DPI value, the pixel count stays the same, and so does the sharpness on screen.
What matters is total pixel dimensions. A 3000 × 3000 canvas has the same detail whether it's labeled 72 DPI or 300 DPI. DPI only matters when you're sizing for a physical output. At 300 DPI, a 3000 px side prints cleanly at 10 inches. If you want it printed at 20 inches, you either accept 150 effective DPI or you need a canvas twice as large.
That's why many people report that "my canvas is 300 DPI and it's still pixelated." The DPI was fine. The pixel count was too low.
Fix 3: Stop Scaling Raster Layers
Every resize, rotation, or warp in Procreate resamples your pixels. Scaling down loses some detail, but scaling up is worse, because the app has to invent pixels between the ones it has. Repeat the transform a few times and lines turn mushy.
Change the interpolation setting. Procreate's Transform tool defaults to Nearest Neighbor, which produces hard, stair-stepped edges after scaling. Tap the Transform arrow, look at the bottom toolbar, and change Interpolation to Bilinear or Bicubic. Bicubic is typically the better choice for line art and illustration because it blends edges more smoothly. Nearest Neighbor is only worth using for deliberate pixel art.
Transform once, not repeatedly. Each pass degrades the layer. If you have to resize, do it in a single move rather than nudging it several times.
Separate draft from final. Keep rough construction on its own layer where you can scale and rotate freely. When the composition is settled, lower that layer's opacity and ink the final lines on a clean layer at the correct size. Don't transform the final layer afterward. Retracing is slower than resizing, but it produces fresh, sharp edges instead of stretched ones.
Size placed images before you place them. If you bring in a sticker, logo, or reference and it looks pixelated, the source file is usually too small. Enlarging it in Procreate won't help. Get a higher-resolution original.
Fix 4: Pick the Right Brush and View
Some brushes are built to look textured, grainy, or soft. They can read as pixelation even when the canvas is fine. For hard, clean outlines, use an inking brush such as Studio Pen, Technical Pen, or Monoline, and keep the brush's opacity at full.
Also keep in mind that brush size is relative to the canvas. The same maximum brush looks thinner on a bigger canvas, so you may need to adjust brush size or sketch at a more zoomed-in level to get the line weight you want.
Finally, judge sharpness fairly. If you zoom in far enough on any raster image you'll see pixels. The test is whether the art looks clean at the size it will actually be delivered, not at 800% magnification.
Fix 5: Export Without Adding Damage
A clean canvas can still look rough after export.
- Use PNG for line art and flat color. It's lossless and preserves hard edges and transparency.
- Avoid JPEG for linework. Compression produces halos and blur around thin strokes. Use it only for photographic or painterly work where size matters more than edge fidelity.
- Use PSD when you need layers. It keeps your layer structure for further work in Photoshop or a compositing app.
- Export at native size. Don't let a downstream app or sharing service resize the file.
If your image looks fine in Procreate but soft elsewhere, compare the pixel dimensions of the exported file with what you expected. Some platforms may resize or recompress images automatically.
The Layer Trade-Off
There is a cost to large canvases. As canvas pixel dimensions grow, Procreate lowers the maximum number of layers you can have. Some artists report getting only around 7 to 11 layers at large sizes, and the exact number can depend on your iPad model and whether the app is up to date.
Ways to manage it:
- Merge layers once sections are final, keeping a duplicate of the file before flattening.
- Break big pieces into separate files, such as a linework file and a color file.
- Decide the target size first. Don't use the maximum canvas by default. Choose the size your deliverable needs, plus headroom for cropping.
Taking Procreate Art Into After Effects
Motion designers hit pixelation in a different way. The art looked fine in Procreate, then softened once it was animated.
- Match canvas to comp, with headroom. If the comp is 3840 × 2160 and you plan to push in or scale a layer, the Procreate canvas should be larger than the comp, not equal to it. Any scale above 100% in After Effects softens a raster layer.
- Separate elements you will animate. Export moving parts as individual PNG layers or PSD layers so you aren't scaling the whole illustration to move one piece.
- Check the scale value on import. In After Effects, look at each layer's scale. Anything above 100% is being enlarged. Anything well below it means you're carrying more resolution than you need.
- Avoid compounded resampling. Scaling in Procreate, then again in After Effects, then again in a nested precomp stacks softness. Plan the final scale once.
Quick Checklist
- Confirm the canvas is at least about 3000 × 3000 pixels for line art, and larger if you will crop, push in, or print big.
- Ignore the DPI number unless you're sizing for print.
- Set Transform interpolation to Bilinear or Bicubic.
- Draw final linework at final size and avoid transforming it afterward.
- Use a clean inking brush for hard edges.
- Export PNG or PSD, not JPEG.
- In After Effects, keep imported layers at or below 100% scale.
- If you're stuck with a low-resolution source, upscale it cautiously and inspect the result closely.
FAQ
Can I remove pixelation from an existing drawing? You can reduce the look of it by retracing at a larger size or upscaling, but you can't restore detail that was never captured. Redrawing on a bigger canvas gives the cleanest result.
Does a higher DPI make Procreate sharper? Not on its own. DPI changes print size, not pixel count. Increase the canvas pixel dimensions instead.
Why does my art look sharp in Procreate and blurry after I post it? Likely JPEG compression, automatic downsampling by the platform, or both. Export a lossless PNG at the native size and check the platform's recommended dimensions.