How to Get Rid of Background on Lineart in Procreate
StyleFrame Team8 min read
To get rid of the background on lineart in Procreate, hide the Background color layer, and delete any white fill layer under the lines. If the white is baked into the same layer as the lines, open Selections, choose Automatic, tap the white, adjust the threshold, then Clear it. Export as PNG with the background hidden to keep transparency. Procreate has no single "remove background" button, so for clean antialiased edges you may prefer to finish the job in a compositing app such as After Effects or Nuke.
Why Procreate has no one-click fix
Procreate's own documentation says it has no dedicated tool for removing backgrounds. You choose between a few methods depending on how the lineart was built. Which one works depends on three things:
- Is the white a separate layer or the Background color? Both are easy to remove.
- Is the white baked into the same pixels as the lines? This is the case for scans, photographed sketches, and imported JPEGs, and it needs a selection-based method.
- Do you need hard-edged transparency or true soft alpha? For motion work, soft alpha usually matters more, because you'll composite the lines over moving footage or color.
Diagnose first. Open the Layers panel and toggle each layer's checkbox. If the white disappears when you hide something, you're done with the cleanup and only need to export correctly.
Method 1: Hide the Background color and any fill layer
Most "background" problems on native Procreate drawings are just the default paper.
- Open the Layers panel.
- Turn off the Background color layer at the bottom of the stack.
- Check for any layer filled with white beneath your lines and hide or delete it.
- Look for the checkerboard pattern behind your lines. That confirms transparency.
If your lines sit on their own layer, you already have clean transparent lineart. Skip ahead to the export section.
Method 2: Automatic Selection plus Clear
Use this when the lines and white share one layer, for example a scanned inking pass or a downloaded JPEG.
- Tap the layer containing the lineart to make it active.
- Open Selections and choose Automatic.
- Tap a white area of the background. Keep your finger down and drag left or right to adjust the threshold. Lower values select only near-identical whites, and higher values pull in the light grays around your line edges.
- Once the white is selected, use the three-finger Clear gesture, or open the layer menu and tap Clear. Choosing Cut also works.
- Hide the Background color layer to check the result.
One caution from user support threads: if the selection grabs the whole image, or the clear gesture seems to delete everything, the threshold is probably too high, or the selection covers the entire layer. Undo, restart the selection, and tap directly on a pure-white region. In one support thread, Cut worked where Clear did not, and some people find it easier to locate.
Enclosed areas need a second pass
Automatic Selection picks contiguous regions, so white trapped inside closed shapes (inside a letter "O", between crossing lines, or inside a character's eye) stays put. Tap each enclosed pocket in turn, using Add mode so the selections accumulate, then clear them all at once.
Handling halos and speckle
Antialiased lines blend from black to white across a few pixels. After clearing, those in-between grays can remain as a pale fringe that shows up against dark or colored backdrops. Some ways to reduce it:
- Raise the Automatic threshold slightly so more of the light edge pixels get selected.
- Use the feather option on the selection before clearing, so the edge transition is softer.
- For JPEG sources, expect noise in the "white." Compression artifacts can leave speckles that a flat tap won't capture. A higher threshold helps, and sometimes a second pass is needed.
- Start from the highest resolution scan you have. Cleaner edge pixels mean fewer halos.
Method 3: Manual selection for rough cleanup
If you only want to keep part of the layer, such as one character from a busy sketch page:
- In Selections, use Freehand, Rectangle, or Ellipse to trace around what you want to keep.
- Tap Invert at the bottom.
- Scrub three fingers left and right on the canvas to delete the area outside of your selection.
This is fast but imprecise, so it's best for removing stray marks, page edges, and scanner shadows rather than for fine edge work.
Method 4: Multiply for visual-only transparency
Sometimes you don't need real alpha. You only need black lines to sit over color or texture inside Procreate. Setting the lineart layer's blend mode to Multiply makes white effectively disappear against whatever is underneath, and the lines darken it.
This is useful for coloring workflows, because you can put flat color layers below the lines and keep the original scan untouched. The limitation is that Multiply is a blend, not transparency. If you export the layer alone, the white comes with it. If another app reads the file as a flat PNG, the white will still be there. For handoff, you need one of the alpha methods above or the compositing approach below.
Exporting with transparency intact
Even a perfectly cleaned layer will come out with a white background if you export wrongly.
- Hide the Background color layer before exporting.
- Use Actions → Share and choose PNG (or PSD if you want layers). JPEG cannot store transparency.
- For layered handoff, PSD keeps each layer separate, which is generally the better route into After Effects, where you can import as a composition with layers retained.
- If you're using Animation Assist, check how its export treats the background setting before rendering a whole sequence. Re-exporting dozens of frames because one toggle was wrong is a waste of an hour.
Getting true soft alpha in your compositing app
If the destination is a motion project, the cleanest approach is often to skip the heavy lifting in Procreate. Export the lineart as a black-on-white image and convert luminance to alpha in your compositor. This keeps antialiasing intact, since the darkness of each pixel becomes its opacity, with no halo to chase.
After Effects
- Quick: put the lineart layer above your background and set its blend mode to Multiply. White drops out without touching the file.
- True alpha: apply Shift Channels and set the alpha source to inverse luminance, so dark pixels become opaque and white becomes transparent. Then add a Fill effect (or a Fill-based adjustment) to set the line color. Colored line work may need an extra step, since this approach keys on brightness.
- Pre-compose the result so you can reuse it across a scene and keep the effects stack tidy.
Nuke
Shuffle luminance into the alpha channel, invert it, set the RGB to your line color, and premultiply. This gives you clean, controllable edges you can grade or erode downstream.
Blender and others
In Blender's compositor, you can convert the image to grayscale, invert it, and feed it into a Set Alpha node. Other compositing and editing apps offer similar luminance-based options, though they may offer less control than a dedicated alpha conversion.
When the background isn't flat white
Everything above assumes a plain, light background. Real production material often isn't like that: a pencil sketch photographed on textured paper, lineart scanned with a shadow gradient, or frames pulled from a reference clip where the linework sits in a busy scene. Threshold-based selection struggles with those, because there's no single color to tap.
For those cases, it may be worth testing a different approach, such as a dedicated AI-based background-removal tool, including Styleframe. You could isolate a subject from a complicated source, then bring the results into your usual pipeline. Results on any specific source will vary, so test on a representative frame first.
Once you have the frames, you can bring them into an existing After Effects or Nuke comp, where you can still apply the luminance-to-alpha steps above. This isn't a substitute for a quick Automatic Selection on a flat white scan, which Procreate handles quickly.
Quick troubleshooting
- The whole image disappears when I clear: the selection covered the entire layer, or you cleared the wrong layer. Undo, confirm the active layer, and reselect with a lower threshold.
- White remains inside closed shapes: use Add mode and tap each enclosed pocket.
- Light fringe around the lines: raise the threshold, feather the selection, or convert luminance to alpha in your compositor instead.
- PNG still has a white background: the Background color layer was visible at export, or a white layer remains in the stack.
- Speckles across the clear area: the source is probably a compressed JPEG. Raise the threshold or rescan at a higher quality.
- Lines look jagged after cleanup: you've likely filled or thresholded too aggressively. Go back to the original and use the Multiply or luminance-to-alpha route.
Choosing the right route
For native Procreate drawings, hiding the Background color and exporting a PNG is all you need. For flat scans and JPEGs, Automatic Selection plus Clear solves it quickly, with enclosed areas handled by a second pass. For anything headed into motion work, export the black-on-white lineart and let After Effects or Nuke convert luminance to alpha. That gives you the cleanest edges and keeps the decision reversible. If the source is a messy, non-flat background, a dedicated background-removal pass can take over before you bring the frames into your comp.