How to Get Procreate Brushes on Clip Studio Paint
StyleFrame Team8 min read
Procreate brushes (.brush and .brushset files) cannot be imported directly into Clip Studio Paint, because the two apps use different brush engines and file formats. The practical workaround is to rebuild the brush: export the brush's shape or texture as a black-and-white image, register it as a brush tip material in Clip Studio Paint, and tune the settings until the stroke feels similar. If the brush came from a Photoshop-compatible .abr pack, you may be able to import it directly, though you will probably still need to adjust the settings.
Why Procreate brushes don't import directly
Each app stores brushes in its own format. Procreate uses .brush and .brushset, Photoshop uses .abr, and Clip Studio Paint uses .sut. Those files describe more than a tip image. They hold the rules for how the engine handles pressure, tilt, spacing, grain, blending, and rendering, and Clip Studio Paint has no parser for Procreate's rules.
Procreate's own team has said publicly that it added .abr import because many brush makers work in Photoshop. It was not sure that supporting other apps' formats, Clip Studio Paint's included, was realistic. Don't plan around a converter appearing.
For motion and VFX artists, the situation is familiar. A look is rarely portable as a preset. What carries over is the source art (shapes, textures, references), and you rebuild the behavior in the new tool.
What does import: .sut and .abr files
Before rebuilding anything, check the file extension.
- .sut files are native Clip Studio Paint brushes. They import without trouble.
- .abr files are Photoshop brushes. Clip Studio Paint may accept them, but the results often need adjusting because the engines differ.
- .brush and .brushset files are Procreate-only. Unzipping them won't produce anything Clip Studio Paint can load. Users have reported that an extracted pack shows "no brushes" for this reason.
If a creator sells both Procreate and Clip Studio Paint versions of a pack, buy the Clip Studio Paint version.
How to import a .sut brush
There are two reliable methods.
- Drag and drop. Select the Brush tool, open the folder containing the .sut file (unzip it first if it came compressed), and drag the file into the Sub Tool palette. On Windows, you may need administrator privileges for drag and drop to work.
- Import from the menu. Open the Sub Tool palette's menu (the hamburger icon), choose Import sub tool, select the file, and confirm.
Clip Studio Paint has an official FAQ on importing brushes that you can check if the interface differs in your version.
Method 1: Rebuild the brush from its tip shape
This gets closest to the original, and it's the approach one popular tutorial walks through. You aren't converting the brush. You're recreating its look with Procreate's shape or grain image as the source.
Step 1: Capture the brush shape in Procreate
Open the brush in Procreate's brush studio and look at the shape source (and the grain, if it has one). Take a screenshot of the shape on the iPad, then crop and save it. Send it to your computer through AirDrop, cloud storage, or any file sync you already use.
Step 2: Clean it up in Clip Studio Paint
Open the screenshot in Clip Studio Paint and crop it to the shape itself. Brush tip materials work on tonal values, so you want a clean grayscale or black-and-white image. Depending on how the shape appears, you may need to invert it so the part that should paint is the dark part. The tutorial workflow duplicates the layer, applies a tonal-correction reverse, then converts the result to an image material layer set to use black only.
Step 3: Register it as a brush tip material
With the cleaned layer selected, register it as an image material and choose the brush tip option. Give it a clear name, such as "Procreate 6B tip," and save it to the brush tip image category so you can find it later.
Step 4: Build a new sub tool
- Duplicate a Clip Studio Paint brush close to what you want, such as a pencil for a pencil-like tool.
- Rename it (for example, "Procreate pencil").
- Open the Tool Property settings (the wrench icon) and go to the brush tip section.
- Remove the default tip shapes you don't need.
- Add your registered material as the tip.
Without any other changes, the result will look rough. That is expected. The stroke will probably jitter or lack texture until you tune it.
Method 2: The quick stroke-as-tip approach
If you don't need precision, a faster route works for basic brushes:
- Draw a single stroke or a stamp with the brush on a new Procreate canvas.
- Export it as a PNG.
- In Clip Studio Paint, create a new brush and import the PNG as the tip shape.
This captures the general look but not the behavior, because a stroke baked into a flat image has no pressure response or grain. It suits stamps, textured edges, and simple inking tools. For anything that needs to feel like the original, use Method 1 and spend time on settings.
Tuning settings so it feels like the original
Most of the work in a rebuilt brush is the settings. In Clip Studio Paint, check these in order:
- Brush size and ink. Set the base size and the min/max pressure response.
- Density. Controls how solid the stroke reads. Raising or lowering it fixes many "this looks too thin" problems.
- Spacing. Too wide, and the stroke looks like a row of beads. Too tight, and it builds up unevenly.
- Stroke and stabilization. If the line jitters, correction settings usually fix it.
- Texture. Add a paper grain or texture for pencil, charcoal, and chalk looks. Check that it's actually applied, because it may look right in the panel and not act that way in a stroke.
- Spray effects. For airbrush or grainy edges, enable and tune these.
Draw a test stroke after each change, ideally next to a Procreate screenshot of the same stroke. Treat the match as "close enough to work with," not identical.
Method 3: Use lookalike brushes instead
For common brush types, rebuilding may not be worth the time. The Clip Studio Assets store has many brushes made to mimic popular Procreate tools. Community advice for this exact problem is to find a stand-in, or to make your own imitation for personal use.
One caution: if you rebuild a commercial Procreate brush from its shape images, check the license. Recreating a brush for personal use is different from redistributing it or using someone's paid texture in commercial work without permission.
What won't transfer
Some Procreate behaviors depend on the engine, and no workaround brings them over cleanly:
- Procreate's rendering and blending modes. Clip Studio Paint's color mixing, including its average blending, behaves differently.
Users have noted that Clip Studio Paint offers things Procreate lacks, such as dual-color brushes (light values map to one color, dark to another) and RGB stamping brushes like image hoses. Going from Procreate to Clip Studio Paint, you gain options but lose exact parity. Aim for the look, not the behavior.
Where Styleframe fits in a motion pipeline
If you're moving brushes between illustration apps, there's a good chance the artwork is headed for motion work. A hand-drawn texture or painterly look often ends up in After Effects, Nuke, or Blender, and the question becomes how to carry that look into moving footage, not just a still.
is an AI video and motion tool built for artistic control rather than one-click output. It uses reference-driven style transfer, so you can take a brush texture or painted still you made in Clip Studio Paint and use it as the reference for a style.
It doesn't replace your drawing app or your compositor. You keep your brushes and your compositing workflow, and Styleframe handles the step of extending a still style into motion.
Practical tips for animators and designers
- Keep a source library. Store your brush tip PNGs and textures in a shared folder, not only inside either app. That makes rebuilding in a third tool much faster.
- Name rebuilt brushes honestly. Label them "(CSP rebuild)" so teammates know they approximate the Procreate original.
- Test at delivery resolution. A brush that looks good zoomed out may band or alias at 4K. Draw test strokes at your final canvas size.
- Export predictably. If the artwork will be animated or composited, export layered files or PNG sequences, and keep transparent backgrounds so your comp can treat the brush work as an element.
- Lock a reference frame. Once a rebuilt brush looks right, save a reference stroke sample. It anchors the look if you later pass it to a style-transfer tool or another artist.
FAQ
Can I convert a .brushset file to .sut? Not reliably. The formats describe different engines, and no standard tool maps one to the other. Rebuilding from the shape and texture images is the dependable route.
Will .abr files from Photoshop work? They may import into Clip Studio Paint, but expect to adjust settings, since the brush engines aren't the same.
Is there a fast way to get a similar feel? Find a close lookalike in the Clip Studio Assets store and tweak it. For simple brushes this is usually faster than a full rebuild.
Why did my unzipped Procreate brush pack show nothing? Because .brush and .brushset files are specific to Procreate. Clip Studio Paint has nothing to read in them.