How to Get Metallic Colors in Procreate
StyleFrame Team8 min read
Procreate has no metallic color swatch, because metal isn't a single color. It's a pattern of light, dark, and sharp highlights that reflect the surroundings. To get gold, silver, or copper, paint a high-contrast gradient with banded light and dark transitions, or shade in grayscale and recolor it with a Gradient Map. You can also clip a metallic texture to your shapes. All three methods fake the reflection, and that is what makes the surface read as metal.
Why Procreate Has No "Metallic" Color
A hex value can't describe metal. Real metal has a broad, low-saturation base tone close to its true hue, a few hard specular highlights, and reflections of whatever sits around it. Painters on the Procreate forums make the same point: the best way to understand metallic color is to study photos of metal under different lighting.
Look closely at a gold mask or a brushed steel panel and you'll rarely find "gold" on the palette. You'll find browns, oranges, yellows, and near-whites placed in a deliberate rhythm. Procreate gives you the tools to paint that rhythm, but you have to build it.
Think like a lighting artist. You're not choosing a metallic color, you're designing how light moves across a surface.
Method 1: Two-Tone Light and Dark Gradients
This is the fastest route for lettering, badges, backgrounds, and flat graphics.
- Pick a very dark shade and a very light shade of the same hue. For gold, that might be a deep brown-orange and a pale yellow. Rose gold and silver work the same way with different hue pairs.
- Fill the outer areas of your shape with the dark tone and the center with the light tone. Precision isn't important here, and uneven placement often looks more natural.
- Use the straight-line trick (draw a stroke and hold to snap it) to lay down clean bands, then smooth the transitions with a soft brush.
- Add one or two mid-tone steps between the extremes so the gradient doesn't look like plastic.
Procreate works differently from Photoshop here. You draw the gradient rather than generating a live one, so you can't reopen it and adjust stops later. Keep each gradient on its own layer. Then you can recolor it with Hue, Saturation, Brightness, or transform it without repainting.
If choosing colors by eye is slow, build a palette from a reference photo. Open the palette panel, tap the plus icon, and choose New from Photo. Procreate samples the image's colors into a palette you can pull highlight and shadow tones from.
Radial and Rippled Variants
Swap linear bands for radial ones and you get a spotlight sheen, like a coin or a polished disc. Stack several concentric circles with alternating light and dark values for a rippled look. The principle doesn't change: alternate light and dark, and vary how abruptly each transition happens.
Method 2: Shade in Grayscale, Then Use a Gradient Map
This is the most flexible method, and the one I'd recommend if you need several metals from one drawing.
Build the Value Structure First
- Fill each part of the drawing with a flat base color.
- Decide where the light comes from and paint basic form shading.
- Increase the contrast. Basic shading makes an object look 3D but not metallic.
- Add more light-to-dark transitions in a pattern like light, mid, dark, mid, light. Make some transitions soft and some abrupt. The hard edges are what read as reflection.
- For a very shiny surface, make transitions sharper and more frequent, then add small crisp white specular highlights where the light source hits directly.
Recolor with Gradient Map
Once the value structure works in grayscale, open Adjustments and choose Gradient Map. Map the darkest values to a deep, warm shadow color and the lightest to a pale highlight, with a few nodes between them. A five-node map is a good starting point:
- Gold: dark brown, burnt orange, saturated yellow, pale yellow, near-white
- Silver: charcoal blue-gray, mid gray, light gray, cool white
- Copper: deep maroon, rust orange, bright orange-pink, cream
Apply the map to individual layers to give different parts of an illustration different metals. To change everything at once, merge the layers into a single one first. Because your drawing is value-based, you can swap gold for platinum or brass without repainting.
Method 3: Import a Metallic Texture and Clip It
If you want real surface detail like foil, brushed metal, or flake, use a photographed or scanned texture.
- Open Actions, then Add, then Insert a Photo (or Insert a File). The texture arrives as a new layer.
- Move the texture layer directly above the layer you want to turn metallic.
- Tap the texture layer and choose Clipping Mask. The texture now shows only where the layer below has pixels.
- Alternatively, select the shape (tap the layer thumbnail, then Select), then cut or mask the texture to that selection.
Texture tools are also useful for lettering: clip a foil texture to a text layer and the whole word becomes metal.
Adjust the Texture to Match Your Palette
Use Hue, Saturation, Brightness to shift a gold texture toward rose gold or brass. Pull saturation down a bit for a more refined, less cartoonish metal. If you use third-party textures, check the license before using them in commercial work.
Method 4: Candy and Pearlescent Metals
Colored metallics like candy red or metal-flake paint follow a car-painter's logic. You lay a reflective base coat, then a translucent color over it.
- Paint the base in grayscale with strong highlights, as in Method 2.
- Add a new layer above it and fill or paint your candy color.
- Set that layer to Color or Overlay so the highlights still shine through.
- For flake, add a textured speckle layer between the base and the color, or use a scatter brush with small bright dots.
The bright highlights do the work of an imagined clear coat. Keep a few of them pure white and don't let the color layer tint them completely.
Tips for Making It Read as Metal
- Contrast beats color. If a surface looks dull, increase the value range before changing hue.
- Break up the gradient. Smooth ramps look like plastic or satin. Add sharp edges and dark reflection bands.
- Reflect the environment. A hint of sky color in the upper edge, or a warm bounce at the bottom, sells the surface.
- Keep highlights small and crisp. Specular hits should be the brightest, smallest shapes in the piece.
- Use less saturation in the base. Broad highlights are close to the metal's true hue but not very saturated. Push saturation only in the shadows and mid-tones.
- Work non-destructively. Separate base shading, highlights, and color on different layers so you can revise each one.
Taking Procreate Metals into an After Effects Pipeline
For motion work, Procreate is usually a design or texture step rather than the final render. Export layered PSD or PNG files and bring them into After Effects with layers intact, so you can animate a highlight band sliding across a logo or a gradient sweeping across type.
A few practical habits help:
- Export at a canvas size large enough for your comp resolution, so you aren't scaling up painted highlights.
- Keep highlights on their own layer. Animate their position or use a track matte to simulate a moving light.
- Paint metallic textures in a large, seamless tile if you plan to scroll or map them.
- Check your color profile when moving from iPad to a video comp so gold doesn't shift toward green or orange.
Procreate gives you painted, hand-controlled metals. The limit is that the reflections are fixed to one lighting setup. Once the camera or object moves, you have to repaint or fake the change in compositing.
Extending a Procreate Metal Look with Styleframe
Where a painted look has to move, a reference-driven tool can help carry it across frames. Styleframe is an AI video and motion tool built for artistic control rather than one-click output. Everything is driven by reference images, video clips, and keyframes.
You could paint a hero frame in Procreate with the metallic treatment you want, then use it as a style reference. Restyle and Ink-and-Paint apply that reference's look to other footage or frames. Keyframe-driven Frames-to-Video generates motion between frames you've defined, so you decide where the animation starts and ends. Other tools in the set help with the surrounding steps. 2D-to-3D and Turntable can show a painted object from other angles. Remove Background isolates the subject. 4K Upscale prepares output for delivery.
Iteration is non-destructive, so you can try variations without losing earlier versions. Styleframe exports image sequences, so the results go into your existing After Effects or Nuke comp for grading, relighting, and final compositing. An After Effects plugin is on the way. As with any generative tool, check results frame by frame, since fine specular detail is the kind of thing that can drift between frames.
Quick Reference
The core idea is the same in every method: metallic color in Procreate is built from value contrast, hard-edged highlights, and a color ramp, not chosen from a swatch. Get the light and dark pattern right in grayscale and the rest is recoloring.