How to Get Liquify on Procreate
StyleFrame Team8 min read
Liquify is already built into Procreate on iPad: open a layer, tap the Adjustments icon (the magic wand) in the top toolbar, and choose Liquify. On Procreate Pocket for iPhone, expand the top toolbar with the ellipsis first, then tap Adjustments and Liquify. There is nothing separate to download. If you can't find it, the cause is usually the layer type or the toolbar layout rather than a missing feature.
Where to find Liquify in Procreate
Liquify lives in the Adjustments menu, not in the brush library or the Actions menu. That placement is why many people miss it: it behaves like a brush but is filed with the layer-level effects.
On iPad
- Open your canvas and select the layer you want to distort.
- Tap the Adjustments icon (the magic wand) in the top toolbar.
- Scroll the list and tap Liquify.
- The Liquify controls appear along the bottom of the screen. Your finger or Apple Pencil now paints the distortion directly onto the layer.
On iPhone (Procreate Pocket)
- Tap the ellipsis to expand the top toolbar.
- Tap Adjustments, then Liquify.
- Swipe up on the grey handle at the center of the Liquify readout to open the full settings and mode list. Swipe it down to collapse the interface again.
The Pocket interface is more compact, so modes and sliders are tucked behind that handle. The effects are the same ones you get on iPad.
What to do if Liquify is missing or won't work
Most "I can't get Liquify" problems fall into a short list.
- You're in 3D painting. Liquify does not work while 3D painting. Switch the layer to a regular 2D raster layer, or work on a flattened copy, then try again.
- You're looking in the wrong place. Selecting a brush tool will exit Liquify, because Liquify is not a brush you can pick from the library. Go back through Adjustments each time you want it.
- The layer isn't ready. Some layer content may need to be rasterized before you can warp it. At least one tutorial rasterizes the layer first before using Liquify.
- The toolbar is collapsed on iPhone. On Pocket, Adjustments sits behind the ellipsis.
If none of that applies, check that you've selected a layer rather than the background color. Adjustments apply to the active layer.
The Liquify modes, in plain terms
Once you're inside, the bottom menu defaults to Push. Tapping the mode button opens the list:
- Push moves pixels in the direction of your stroke, like a strong smudge. It's handy for nudging shapes without redrawing them.
- Twirl Left / Twirl Right twists pixels around your stroke in either direction.
- Pinch pulls surrounding pixels toward the stroke, shrinking detail.
- Expand pushes pixels away from the stroke for a ballooning effect.
- Crystals pushes pixels away unevenly, producing small, sharp shard-like distortions.
- Edge pulls pixels toward a line rather than a point, which looks like folding two halves of the image together.
- Reconstruct restores the original artwork under your Liquify effects. Paint with it when you've over-warped one area and want to recover it without losing the rest.
Apple Pencil Pro users can use barrel roll to control Twirl, rotating the pencil to set the amount of effect.
The sliders that shape the result
Liquify behaves like a brush, so its sliders matter as much as the mode.
- Size sets how much area each stroke affects. A large size moves whole forms; a small size concentrates on fine detail.
- Pressure sets the maximum effect at full Apple Pencil pressure. With a finger, Liquify always applies the maximum set here, so there is no pressure variation.
- Distortion adds chaotic variation, making effects more twirly, jagged, or twisted.
- Momentum keeps the effect moving after you lift off the canvas, as if the stroke overshot. Raising Momentum and Distortion together gives a more fluid, liquid look.
- Amount (via Adjust on iPad, or in the settings on Pocket) reduces the strength of everything you've applied so far.
- Reset clears your changes and keeps you inside the Liquify interface.
When you're happy, commit the changes by tapping the Adjustments icon again to leave the tool.
A practical workflow for getting clean results
Liquify changes the pixels of your layer, so a few habits protect your artwork.
- Duplicate the layer first. Warp the copy and keep the original hidden. This is the simplest way to return to the starting point after you've committed.
- Work in passes. Use a large Size with Push to move big shapes into place, then reduce Size for finishing adjustments. One heavy pass tends to smear detail.
- Use Reconstruct selectively. Instead of resetting everything, paint Reconstruct over the areas that went too far.
- Expect softening. Warping can blur linework slightly. On rough sketches this rarely matters; on final art, keep strokes minimal or work at a higher canvas resolution.
- Isolate what you're moving. Put elements on separate layers so you can shift a hand, a prop, or a horizon line without disturbing everything around it.
Some artists use Liquify as a repositioning tool rather than just a special-effects tool: scooting a drawn element a few pixels over, correcting proportions, or lining up a hand with the ground, all without redrawing.
Why motion designers care about Liquify in Procreate
For animators, designers, and VFX artists, Procreate is often where a hand-painted styleframe, texture, or concept lives before it goes into a motion pipeline. Liquify is handy there: you can bend a character silhouette, exaggerate a pose, warp a background plate, or generate organic, painterly distortion to use as a texture or transition element.
The limitation is that Liquify operates on one still layer at a time, and the distortion you paint is a one-off. If you want that look to hold across a sequence, you either repeat the warping frame by frame or move into a tool that handles motion.
Where it hands off to your motion tools
A typical handoff looks like this:
- Paint or warp your frame in Procreate.
- Export the layers or flattened frame.
- Import into After Effects or another motion tool to animate it.
- For compositing-heavy shots, bring the same elements into your compositing or 3D tool as textures or image planes.
Exporting layers separately keeps your options open, since you can animate the warped layer independently of the rest of the artwork.
Taking a Liquify-style frame into motion with Styleframe
When the goal is moving footage rather than a single warped still, Styleframe fits as a controllable AI video and motion tool beside your existing pipeline. It isn't a replacement for Procreate's Liquify; it picks up where a still frame ends.
Say you've bent and stylized a frame in Procreate and want it to evolve into another frame. In Styleframe, you can set keyframes and use Frames-to-Video so the motion between them is driven by images you made, not a text prompt alone. Restyle and Ink-and-Paint apply a reference-driven look to video, so a painterly or inked aesthetic from your Procreate work can guide the output. The result is steered by your reference images, clips, and keyframes, not a one-click black box.
A few other tools can help around this step:
- 2D-to-3D and Turntable turn a stylized drawing into a rotating view when you need dimensional reference.
- Remove Background isolates the subject so you can place it in a separate plate.
- 4K Upscale brings output to production-ready resolution.
Iteration is non-destructive, so you can try variations without losing earlier results. Styleframe exports image sequences, which drop straight into After Effects or Nuke, so your compositing, color, and finishing stay where they are.
Common questions
Is Liquify free in Procreate?
It's a built-in part of the Adjustments menu, so there's no separate tool to buy or install.
Can I use Liquify on a specific part of an image?
Yes. The effect follows wherever you paint, and Size controls how much area each stroke touches. For tighter control, put the element on its own layer first, or use Reconstruct to restore areas you don't want changed.
Why does Liquify exit when I choose a brush?
Liquify isn't a brush, and Procreate leaves it when you pick a brush tool. Re-enter through Adjustments → Liquify whenever you need it. Users have requested a brush-style version, but as of the forum discussion it isn't an option.
Does Liquify work on a 3D model?
Not while 3D painting. Use a standard 2D layer.
Can I undo a Liquify effect after committing?
Use Procreate's normal undo gesture immediately after committing. Otherwise, duplicate the layer before you begin so you always have a clean original.
Summary
To get Liquify in Procreate, go to Adjustments (the magic wand), then Liquify. On iPhone, open the ellipsis menu first. If it won't work, check that you're on a 2D layer and not in 3D painting. Learn the modes, tune Size, Pressure, Distortion, and Momentum, and protect your work with duplicate layers and Reconstruct. From there, export your frames into After Effects or Nuke, or extend them into motion with a keyframe-driven tool like Styleframe.