How to Get Line Art from a Photo Procreate
StyleFrame Team8 min read
Procreate has no one-tap line art conversion, but you can build one with layers and blend modes. Desaturate your photo, duplicate the layer, set the top copy to Divide (or invert it and use Color Dodge), then add a Gaussian Blur until the outlines appear. Finish with Curves to tighten the contrast, and set the line layer to Multiply so you can color underneath it. For moving footage, a reference-driven tool like Styleframe's Ink-and-Paint is a better fit than repeating this process frame by frame.
The Short Version of the Workflow
- Insert the photo (Actions > Add > Insert a photo).
- Desaturate a duplicate (Adjustments > Hue, Saturation, Brightness, saturation to zero).
- Duplicate it again and change the top copy's blend mode to Divide.
- Apply Gaussian Blur to the top layer until lines emerge.
- Merge down, then use Curves to darken the lines and clean the whites.
- Set the result to Multiply if you want to paint or color beneath it.
The sections below cover each step, the Color Dodge variation, and fixes for common failures.
Why Procreate Needs a Workaround
Photoshop-style edge filters such as Find Edges detect contrast boundaries directly. Procreate doesn't offer an equivalent, so the usual approach is a trick borrowed from photo editing: blend a blurred copy of an image against a sharp copy. Where the two differ, which is mostly along edges, you get dark lines. Everywhere else the result flattens to white.
Expect a pencil-sketch look rather than a clean vector outline. Results are usually softer and noisier than a dedicated edge-detection filter would give you. That is fine if you want a tracing reference or a sketchy base for painting, and less fine if you need crisp, closed contours.
Method 1: Divide Blend Mode (Most Controllable)
Step 1: Import and prepare the photo
Open a canvas at the resolution you intend to deliver. If the line art is headed for a video comp, match your comp dimensions now so you don't resample later. Tap the Actions (wrench) icon, choose Add, then Insert a photo. Fit it to the canvas and confirm the transform.
High-contrast photos with clear subject separation work best. Flat, low-contrast images give you faint, patchy lines no matter what you do afterward.
Step 2: Desaturate a duplicate
Swipe left on the photo layer and tap Duplicate. Hide the original so you can reference it later. On the duplicate, open Adjustments > Hue, Saturation, Brightness and drag Saturation to zero. A small Brightness adjustment here can help if the image is very dark.
Step 3: Duplicate again and set Divide
Duplicate the grayscale layer. Tap the "N" on the top copy's thumbnail to open its blend modes and choose Divide. The canvas will go almost entirely white, because dividing an image by itself produces white. That is expected.
Step 4: Blur to reveal the lines
With the top layer selected, go to Adjustments > Gaussian Blur and drag your pencil across the screen to set the amount. Lines appear as the blurred copy diverges from the sharp one. A low percentage gives thin, delicate lines. A higher one gives thicker, heavier strokes that read more like a bold sketch. Stop when the detail level feels right for your subject.
One detail matters here: the blur has to be applied to the layer itself, not as a Layer-mode effect on the wrong layer. If nothing changes, check which layer is highlighted.
Step 5: Merge and refine with Curves
Merge the Divide layer down into the grayscale layer. Open Adjustments > Curves. Drag the bottom-left point to the right to push light grays toward pure white and crush the background noise. Nudge the top-right point slightly left to deepen the darks. Move in small steps. Push too far and you'll lose line detail or flip toward an inverted look.
Method 2: Invert and Color Dodge
This is the classic variation and works on the same principle.
- Insert the photo and duplicate it.
- Desaturate the duplicate.
- Duplicate the desaturated layer.
- On the top copy, open Curves and flip the curve so it runs top-left to bottom-right, which inverts the image.
- Change that layer's blend mode to Color Dodge. You'll find it under the Lighten tab in the blend mode panel. The canvas will turn mostly white.
- Apply Gaussian Blur to the inverted layer until the lines show up.
Color Dodge tends to give crisper, higher-contrast lines than Divide, but it is also touchier. A little too much blur and the image blows out. If you want gentler, more predictable control, start with Divide.
Tuning the Result
- Line weight: blur radius is your main control. Higher blur means thicker, looser lines.
- Noise: if the paper texture or grain in your photo shows up as speckle, apply a light blur to the grayscale layer before the Divide step.
- Contrast: use Curves rather than Brightness/Contrast so you can shape highlights and shadows separately.
- Cleanup: erase stray marks on a new layer above, or mask areas you don't want.
Troubleshooting Common Problems
You get a high-contrast black-and-white photo instead of lines. The blur is probably missing or applied to the wrong layer. Confirm the top layer is in Divide or Color Dodge and that you've actually run Gaussian Blur on it.
The canvas turns yellow or tinted rather than white. The layer still has color information. Make sure you desaturated before duplicating and inverting.
You can't find Color Dodge. Tap the letter on the layer thumbnail (usually "N"), then look under the Lighten tab.
Lines are too faint. Reduce blur slightly, pull Curves harder, or start with a higher-contrast photo.
Everything looks inverted. You pushed Curves too far, or the curve was flipped when it shouldn't have been. Undo and adjust more gently.
Alternative: Trace the Photo by Hand
If you want clean, intentional lines instead of a filter look, trace manually. Place the photo on its own layer, lower its opacity to roughly 30–40%, and lock or dim it. Add a new layer above and draw with a brush that has stabilization turned up, which smooths wobble and helps you get confident, even strokes.
This takes longer, but you decide which edges matter. For character work, product illustration, or any shot where the outline needs to be deliberate, manual tracing usually beats an automated pass.
Coloring Underneath the Line Layer
The converted layer is white with dark lines, not transparent, so painting below it won't show. Set the line layer to Multiply. White then becomes effectively invisible, and you can add a new layer beneath it for flat colors. Linear Burn or Color Burn work too, with small differences in how dark the lines render. Restoring the original photo layer underneath gives you a colored, sketch-overlay look.
Getting the Line Art into After Effects
Motion work usually needs the lines on transparency, or at least in a form that composites cleanly.
- Export a layered file if you want to keep the Multiply blend mode and the separate color layers, and check how your comp handles the blend modes so you can keep adjusting.
- Export PNG if you need a flattened still. The white will remain opaque, so set the layer to Multiply in your comp, or use a keying or inversion approach to turn the lines into an alpha-like element.
- Match resolution. Procreate canvas size limits depend on your device. If you need 4K stills, check the maximum layer count at that size before you start.
- Keep the originals. Hide rather than delete your source photo and intermediate layers, so you can change blur or Curves later.
The blend-mode workflow produces one still at a time.
When a Still-Image Method Stops Scaling
Everything above works well for single images: reference sketches, painting bases, concept frames. It gets painful the moment you need line art across a shot. Repeating blur and Curves adjustments by hand on every frame is slow, and since the effect depends on per-image contrast, line weight tends to flicker from frame to frame.
This is where a tool built around reference-driven control helps. is an AI video and motion tool for artists who need to direct the result, not roll the dice on a black box. Its Restyle and Ink-and-Paint features apply a style from reference images to your footage, so you can set the look of the line work from a reference and carry it across a sequence.
Every generation is anchored to your references, clips, and keyframes. You can still use Procreate for the hand-drawn pieces you want to control exactly, such as a custom reference sketch, and let Styleframe carry that look through motion.
Quick FAQ
Can Procreate make line art automatically? Not with a dedicated filter. The Divide or Color Dodge method is the closest built-in approach.
Which method gives better lines? Divide is easier to control. Color Dodge can be crisper but is more sensitive to blur values.
Why does the result look softer than in Photoshop? Photoshop's edge-detection filters work directly on contrast boundaries, while Procreate's blend-mode method approximates edges by comparing blurred and sharp copies.
What photos work best? Sharp, well-lit images with strong subject separation and minimal noise.
Do I need an iPad and Apple Pencil? Procreate runs on iPad. A pencil helps with the blur gesture and manual tracing, but the layer steps themselves work with touch.