How to Get Ibis Paint Brushes in Procreate
StyleFrame Team8 min read
You can't import Ibis Paint brushes into Procreate directly. Ibis Paint stores brushes as in-app settings that it shares through QR codes, while Procreate uses its own brush format, and no converter exists between them. The practical route is to open the Ibis brush's settings, then rebuild its stroke path, shape, grain, and rendering behavior in Procreate's Brush Studio, or start from the closest built-in Procreate brush and tune it.
Why Ibis Paint brushes don't transfer to Procreate
Ibis Paint and Procreate describe brushes with different parameter models. An Ibis brush is defined by a stack of settings: spacing, stabilization, taper, shape scatter and rotation, grain source, render mode, blending, and color dynamics. A Procreate brush is a packaged file containing a shape source, a grain source, and its own set of dynamics sliders.
Because those two models don't map one to one, neither app can read the other's brush data. Ibis brush QR codes only work inside Ibis Paint, where you open the brush type menu, tap the three dots, and choose the import-by-QR option. Creators publish "Procreate-like" brushes for Ibis this way. The reverse path doesn't exist.
Rebuilding the brush therefore means reading the Ibis settings as a recipe and reproducing the behavior by eye. You won't get an exact match, but you can get close enough for most production work.
Step 1: Document the Ibis brush before you rebuild it
Open the brush in Ibis Paint and go through its settings panel. Take screenshots of every tab so you have a reference while you work in Procreate. Note these groups:
- Stroke path: spacing, jitter, and falloff. Spacing controls whether a stroke reads as a smooth line or a row of stamps.
- Stabilization and taper: how much the line smooths itself and how the thickness changes at the start and end.
- Shape: scatter, rotation, count and count jitter, brush angle, and how pressure or tilt changes roundness.
- Grain: the texture source, how it behaves (moving or fixed to the canvas), its depth, and its blend mode.
- Render and blending mode: glaze, blending, flow, wet edges, and any blend mode set on the brush.
- Color dynamics: any hue, saturation, or brightness jitter per stroke.
Then make a reference sample. Draw a few strokes at different sizes and pressures, plus a fast flick, a slow curve, and a filled patch. Export or screenshot it so you can compare side by side later.
Step 2: Start from the closest Procreate brush
Don't build from scratch unless the brush uses an unusual texture. Duplicate a native Procreate brush that behaves similarly and edit the copy, which keeps the original intact.
Good starting points:
- Inking and line brushes: duplicate a Lineart-category brush. Many artists use these to get a similar feel to Ibis pens.
- Marker-style brushes: start from a flat, hard-edged brush with low spacing and enough flow to build up color.
- Textured or chalky brushes: start from a charcoal or pastel brush, then swap the grain source.
- Airbrush and soft blends: start from a soft airbrush and adjust the falloff and flow.
Step 3: Rebuild the settings in Brush Studio
Tap the brush to open Brush Studio and work through the tabs in order, matching your Ibis notes.
Stroke path and stabilization
Match spacing first, because it affects everything else. If the Ibis brush leaves a continuous line, keep Procreate's spacing low. Add jitter only if the Ibis brush scatters. Procreate has its own stabilization settings that handle the smoothing Ibis calls stabilization. Set them by drawing the same slow curve in both apps and comparing the wobble.
Taper
Procreate's taper settings are similar to Ibis's start and end thickness. If the Ibis line thins at the ends, set the taper to match. Test with a quick flick stroke, since that's where taper shows most.
Shape
Procreate's shape source defines the brush tip. For simple round or square tips the default shapes may be enough. For a custom tip, draw it in a separate canvas as a high-contrast black-and-white image, then import it as the shape source. If the stroke looks inverted, flip the image's polarity and try again. Then set scatter, rotation, and count jitter to echo the Ibis values.
Grain
Grain gives the brush its paper or crayon feel. Ibis lets you choose a grain source, a behavior, a depth, and a blend mode. Procreate has a similar grain section with movement and scale controls. If you want a custom texture, make a seamless grayscale image, import it as the grain source, and adjust scale and depth until the density matches your reference sample. Match behavior too: a grain that moves with the stroke reads very differently from one fixed to the canvas.
Rendering, wet mix, and dynamics
Ibis render modes such as glaze and blending sit closest to Procreate's rendering and wet mix settings. They won't match by name, so judge by result. Light buildup under low pressure suggests a glazing-type render, while a full-opacity stroke regardless of pressure suggests a flat render. Use Procreate's pressure and tilt settings to reproduce how the Ibis brush responds to pressure and tilt, and add color dynamics last, once the brush shape feels right.
Step 4: Compare, then tune the differences
Paint the same test strokes you captured in Ibis and put the two samples next to each other. Check these in order:
- Edge quality: hard, soft, or grainy.
- Pressure response: does the line thicken or darken the way the original does?
- Texture density: is the grain too coarse or too faint?
- Overlap behavior: do strokes build up or merge flat?
Change one setting at a time and retest. Rename the finished brush, and save it in its own set so you can find it later.
Using community "Procreate-like" brushes in Ibis instead
If your actual goal is to bring the Procreate look into Ibis rather than the other way around, there's an easy path. Artists publish QR codes for Ibis brushes designed to imitate Procreate brushes, including oil, grain, and crayon styles. Scanning a code through Ibis's QR import is much faster than rebuilding by hand, though it only works inside Ibis Paint.
Respect creators' terms. Free brush codes and paid packs often come with licensing conditions. Rebuilding a brush's general behavior is normal practice, but cloning a paid pack's exact textures and redistributing them isn't.
Where this fits in a motion design pipeline
Most motion designers and animators who ask this question care about the look more than the app. They want hand-drawn line quality, grain, or a particular ink feel they can carry into animation. A few practical notes:
- Export for compositing: export frames from Procreate as transparent PNGs or PNG sequences, then import them into After Effects as an image sequence. Keep the grain on its own layer where possible so you can adjust or replace it in the comp.
- Keep textures consistent: if a texture will be used across many frames, lock the grain behavior so it doesn't swim unintentionally. If you want boil, add it deliberately.
- Work at delivery resolution: paint at the size you'll deliver, or larger, so brush texture doesn't soften when scaled in the comp.
Extending a hand-drawn look across footage with Styleframe
Rebuilding brushes works for drawn elements, but it doesn't help when you need that look applied to existing footage or to many frames. This is where an AI tool built for artistic control can complement your brush work. is an AI video and motion tool that can use reference images to guide the style of its output. You supply a reference image of your Procreate or Ibis-style artwork and a video clip, and the output aims to follow that look rather than a generic preset.
A workable approach is to paint a few key style frames with your rebuilt brush, then use them as references.
Treat this as an addition to your drawing, not a replacement for it. The brush work defines the look, and the tool helps carry it across more footage.
Troubleshooting common problems
- The stroke looks stamped: lower the spacing in Stroke Path.
- The texture looks flat: raise grain depth, or check that the grain image has enough tonal contrast.
- The line feels laggy or too stiff: reduce stabilization, which is easy to over-apply.
- The brush ignores pressure: check the pressure and tilt settings and the opacity and size dynamics.
- Custom shape appears inverted: flip the polarity of the source image.
Frequently asked questions
Can I convert an Ibis Paint brush file into a Procreate brush file?
No. There's no supported conversion. You rebuild the brush in Procreate's Brush Studio using the Ibis settings as a guide.
Can I scan an Ibis QR code in Procreate?
No. Ibis brush QR codes are read by Ibis Paint's own import feature and don't carry over to Procreate.
Which Procreate brushes are closest to Ibis pens?
Lineart-category brushes are the usual substitute for Ibis pen styles. Duplicate one and tune spacing, taper, and stabilization to match.
Will the rebuilt brush look identical?
Not exactly. The apps handle rendering and blending differently, so aim for a close match in feel and edge quality rather than a pixel-perfect copy.
Summary
Getting an Ibis Paint brush into Procreate means rebuilding it rather than importing it. Record the Ibis settings, duplicate the nearest Procreate brush, match spacing, taper, shape, grain, and rendering, and compare against a test sample until the strokes agree. Once the look is right, export clean PNG sequences into After Effects, or use a reference-driven tool like Styleframe to carry that style across footage while you keep control of the final composite.