How to Get Get a Glassy Look on Procreate
StyleFrame Team8 min read
To get a glassy look in Procreate, paint the object in separate layers: a pale, low-contrast base, darker edge tones, sharp specular highlights, and soft reflections set to Screen, Add, or Overlay. Glass reads as glass through its edges, its highlights, and the way it bends whatever sits behind it, so keep the body of the shape nearly transparent. For frosted or "glassmorphism" surfaces, blur a copy of the background, mask it to your shape, and add a thin bright rim light.
What "Glassy" Means in Procreate
The phrase covers four different looks, and each needs a different approach:
- Clear glass objects such as bottles, tumblers, and spheres, where transparency and refraction matter most.
- Glossy, glass-like finishes on icons, 3D-style lettering, or candy-like shapes, where highlights and reflected light do the work.
- Frosted glass panels, common in UI and title-card design, built from blur, translucency, and a crisp edge.
- Stained glass, which relies on lead lines, flat color pieces, texture, and light passing through.
The tools are shared: layer stacking, clipping masks, blend modes, blur, and a restrained hand. Pick the section below that matches your target.
Set Up the Canvas for Glass
Glass punishes muddy files, so set up for flexibility before painting.
- Work large. Create the canvas at the size you'll deliver, or larger. If the piece will later become a motion plate, match your comp's aspect ratio and leave margin for camera moves.
- Start with a mid-dark background. Clear glass is nearly invisible on white. A dark or mid-tone gradient lets highlights and rim light show up, and you can swap the background later if you keep it on its own layer.
- Name your layers. Base, Edge, Highlights, Reflections, Refraction, and Background will save you time when you revise or export separate elements.
- Pick a light direction now. Decide where the key light sits and note a secondary bounce or rim on the opposite side. Every highlight depends on this choice.
Paint a Clear Glass Object Step by Step
1. Block the silhouette
Draw the outline with a hard-edged brush on its own layer. Use QuickShape or Drawing Assist for symmetrical forms like glasses and bottles so the contours are clean. Fill the shape on a base layer, then Alpha Lock or clip everything else to it.
2. Keep the base nearly transparent
Fill with a very light, desaturated tint (pale blue-gray or green-gray) and drop the layer opacity so the background shows through. A common mistake is painting glass as an opaque pastel object. The body should be the quietest part of the image.
3. Darken the edges
Glass looks thickest at its edges, where light travels through more material. On a clipped layer set to Multiply, paint a soft darker tint along the contour with a soft airbrush. Keep it thin on the lit side and heavier on the shadow side. This single step does more for believability than any highlight.
4. Add specular highlights
Create a layer above and paint crisp, near-white shapes where the key light hits. Use long, slightly curved strokes that follow the form, such as a vertical streak down the side of a bottle or a small hard window shape on a sphere. Leave a few edges razor-sharp and soften others slightly. Variation between hard and soft is what separates glass from plastic.
5. Layer soft reflections
Add a new layer set to Screen, Add, or Overlay and paint broad, low-opacity gradients: the sky, a window, a bounce from a nearby colored object. Keep these subtle. If the reflection is as bright as the highlight, the object loses depth.
6. Paint refraction
Whatever is behind glass should look shifted, flipped, or magnified. Duplicate the background layer, clip it into the glass shape, and distort it:
- Use Liquify (Push or Twirl) for subtle bending.
- Use Transform → Warp or Distort to flip or stretch it.
- Scale it slightly larger inside a convex shape like a sphere to imitate magnification.
For liquid inside a glass, repeat this at a different strength and shift its hue slightly to separate the two materials.
7. Add a caustic or shadow
Glass casts a lighter, colored shadow with a brighter center, not a flat black one. On a Multiply layer, paint a soft, tinted shadow, then add a small Add-mode patch of concentrated light inside it.
Get a Glossy, Glass-Like Finish on Any Shape
If you're after a glossy "glass candy" or 3D-icon look rather than true transparency, the stack is simpler:
- Fill the shape with a saturated base and a gradient from lighter to darker.
- Add an inner shadow-style layer: clip a layer, paint darker color around the edge, and blur it.
- Add a top-sheen: a lighter, curved shape across the upper third, with lowered opacity and a gradient fade. This is the classic "glass" glint.
- Add a thin hard highlight along one edge, then a small bounce light on the opposite edge in a complementary hue.
- Finish with a tiny, bright specular dot or streak.
The trick is to hold the sheen's edge a little crisp and let the rest dissolve. Overly blurred gloss looks like plastic or airbrush gradients.
Create Frosted Glass (Glassmorphism)
This is the effect you see on translucent cards and panels, and it is quick to build:
- Place your colorful background on a lower layer.
- Draw the panel shape on a separate layer, then select it.
- Duplicate the background layer and invert or mask it so only the area inside the panel remains. Layer masks and clipping masks both work.
- Apply Gaussian Blur to that duplicate. Moderate blur reads as frosted, while heavy blur reads as opaque.
- Add a white fill on a layer above, set to low opacity, or use Soft Light for a gentle lift.
- Add a thin rim: stroke the edge with a light color at partial opacity, brighter at the top-left and fading around the shape.
- Add subtle Noise from the Adjustments menu for a fine grain that reads as frosted texture.
Keep the panel's blur consistent across a series. Mixed blur radii make a set of cards look unrelated.
Build Stained Glass Quickly
Stained glass is a different material logic, so treat it separately:
- Draw lead lines on their own layer with a firm monoline or technical-style brush, keeping line weight consistent.
- Fill each segment on a layer underneath with ColorDrop, using saturated, jewel-like colors.
- Add glass texture by clipping a texture layer (noise, ripples, or a hand-painted mottling) over the colors in Overlay or Soft Light.
- Add light: a glow layer in Add or Color Dodge, plus soft gradients that suggest sunlight passing through.
- Give the lead lines a slight bevel with a thin highlight on one side and a dark offset on the other.
Because the colors are flat, you can change a whole piece's mood by shifting hue on a single group.
Finish With Effects That Sell the Material
Procreate's Adjustments menu has several tools that help glass without overdoing it:
- Bloom adds a soft glow around highlights. Use it on a merged copy at low strength.
- Chromatic Aberration gives edges a slight color fringe, which suggests real optics. Apply it lightly, mainly at the edges.
- Curves lets you push contrast so highlights pop against darker edges.
- Gaussian Blur on a duplicate of the highlights, set to Add, creates a controlled glow without softening the originals.
Apply these on duplicated, merged layers so the original stays editable. Stop sooner than you think you should.
Common Mistakes That Kill the Glass Effect
- Opaque bodies. If the middle is as strong as the edges, the object reads as ceramic.
- Highlights everywhere. Three or four well-placed highlights beat twenty scattered ones.
- Ignoring the background. Glass has no color of its own without something behind it or reflected in it.
- Uniform edges. Vary thickness and softness. Real glass is rarely an even outline.
- Pure black shadows. Tint shadows with the object's hue and the environment.
Taking Procreate Glass Into a Motion Pipeline
Procreate is excellent for a single hero frame, but a still is where the problem begins for motion designers. A painted glass bottle can't rotate, a frosted panel can't slide over a moving plate, and a reflection won't track a camera. If your end point is a video, there are two common paths: rebuild the object in 3D, or carry the painted look into motion.
is an AI video and motion tool. Check its current documentation for supported inputs, features, and export formats before building a pipeline around it.
A practical approach is to paint the key frames in Procreate, generate motion and variations from those references in a motion tool such as Styleframe, and then composite in After Effects with your own glow, chromatic aberration, and edge treatments. As with any generative step, check refraction and reflection consistency frame by frame, since physically accurate glass is still best handled with real 3D when exact optics matter.
Quick Checklist
- Near-transparent body with darker edges
- A clear key light and a secondary rim or bounce
- Crisp specular highlights mixed with softer reflections
- Distorted or shifted background inside the shape
- Tinted shadows with a lighter caustic center
- Subtle Bloom, Chromatic Aberration, or Noise to finish
Build the stack in separate, named layers, and you can adjust the glass look quickly, whether it ends as a print, a UI mockup, or the first frame of an animated shot.