How to Get Exact Colors on Procreate
StyleFrame Team8 min read
To get exact colors in Procreate, open the Color panel, switch to the Value tab, and type the hex or RGB values you need, or sample from a reference image with the Eyedropper. Then save the result to a palette. Set the canvas color profile before you paint (sRGB for most video deliverables), because the same hex code can render differently in different color spaces. Finally, turn off anything that alters paint on its way to the canvas, such as reduced brush opacity, color dynamics, and blend modes, and verify the exported file in your destination app.
Start With the Canvas Color Profile
Most "wrong color" problems in Procreate start before a single stroke. Hex values only mean something relative to a color space. If your canvas is in a wide-gamut space such as Display P3 and your After Effects project is working in sRGB, #E8452C won't land on the same pixel appearance in both places.
Check this when you create the canvas:
- Check the canvas color profile setting when you create the canvas.
- Pick the profile that matches your destination. For broadcast, web, and standard Rec.709 video, that's usually sRGB. Choose a wider gamut only if your pipeline is actually color managed for it.
- Create the canvas and don't change it casually afterward.
If you must change a profile on an existing piece, duplicate the artwork first and compare the results. Don't assume the conversion behaves the way you want on a file you can't recover.
Enter Exact Values on the Value Tab
The Color Disc is great for exploring, but it's a touch-based control and won't reliably hit a specific number. For precision, use the Value tab at the bottom of the Color panel.
- Hex field: Paste or type the six-character code from your brand guide or style frame. This is the fastest route when a client hands you hex values.
- RGB sliders: Useful when your spec is given as 0–255 values, or when you're nudging one channel at a time.
- HSB sliders: The Classic tab's Hue/Saturation/Brightness sliders are better when you need to adjust brightness or saturation without drifting the hue.
Remember that the numbers are interpreted in your canvas profile. If a spec was written for sRGB and your canvas is sRGB, the hex entry is straightforward. If the spec came from a P3 design file, you may need to confirm which space those values were authored in.
Sample Colors With the Eyedropper
When the target color lives in a photo, a client's PDF, or a frame grab from a previous project, sampling beats eyeballing.
Set up the gesture
Open Actions > Prefs > Gesture controls and find the Eyedropper settings. Touch and hold is the common choice, but you can assign a different trigger if it conflicts with how you draw. Be aware that sampling a single layer returns that layer's pixels, which may differ from what you see once other layers and blend modes are stacked on top.
Bring the reference in
Add the image via Actions > Add > Insert a photo. Sample from the image using the Eyedropper, then check the value on the Value tab to confirm what you captured.
Watch for sampling traps
- Compression and noise: A JPEG or screenshot has pixel-level variation. Sampling one pixel may give you a color slightly off from the "true" flat color. Sample a few spots and compare the hex values.
- Edges: Anti-aliased boundaries contain blended pixels. Sample from the interior of a shape.
- Photos of screens or paper: These carry lighting and camera white balance. They're fine for mood, not for exact brand matching.
Save Exact Colors to a Palette
Re-typing hex codes every session invites mistakes. Build a palette once and reuse it.
- Open the Palettes tab and create a new palette.
- Set your color on the Value tab, then add it to the palette.
- Name the palette after the project or client.
After building a palette from any automatic or approximate source, still check key swatches against your spec, since extraction tools pick representative colors rather than guaranteed matches.
Palettes can be imported as files, so you can bring the same palette in from another artist. The Color History strip, which holds your last ten colors, is useful for quick comparisons but gets overwritten fast. Don't treat it as storage.
Stop the Canvas From Changing Your Color
Once the right color is selected, plenty of settings can still change what actually lands on the canvas.
- Brush opacity and flow: Anything under 100% blends with what's underneath. Check the sliders in the sidebar and the brush settings.
- Pressure curves: Apple Pencil pressure can map to opacity in some brushes, so your light strokes aren't your selected color.
- Color dynamics: Many textured brushes include hue, saturation, or brightness jitter. Open the brush settings and reset Color Dynamics if you need a flat result.
- Textured grain: Grain affects coverage, which affects perceived color. For flat fills, use a solid brush.
- Layer blend modes and opacity: Multiply, Overlay, and similar modes shift colors by design. Keep flat-color layers on Normal at 100%.
- Adjustments: Color adjustments change pixels. Apply them deliberately, or avoid them on layers that must match a spec.
For large flat areas, use a selection fill rather than painting. Pay attention to edge settings, because soft or anti-aliased edges introduce intermediate colors. If you're building mattes or hard-edged shapes for compositing, a clean selection and a solid fill give you the most predictable pixels.
Don't Trust Your Display Blindly
The iPad's display can make an accurate color look wrong. True Tone and Night Shift both shift white point to suit ambient light, which changes how every swatch looks. Turn them off when you're making color judgments. Screen brightness and surrounding light matter too.
A useful habit: trust numbers over perception. If the hex value on the Value tab is right and the stroke is at full opacity on a Normal layer, the stored pixel is right, even if your screen is making it feel off.
Verify the Export in Your Compositing App
Exact color has to survive the trip out of Procreate. This is where motion designers often discover problems late.
Pick the right format
- PNG for flattened images with transparency. It's lossless and preserves color values.
- PSD when you want layers in After Effects or Photoshop.
- JPEG only for quick reviews, since compression alters pixels.
Check the import in After Effects
- Import the file and check which color profile After Effects assigned in the footage interpretation settings.
- Make sure the assigned profile matches the canvas profile you chose in Procreate. If it doesn't, fix the interpretation rather than the artwork.
- Compare your project's working color space and display color management settings. A mismatch here causes shifts that look like a Procreate problem but aren't.
- Use the Info panel or the eyedropper to read values from a flat area in the comp and compare them to the original hex.
The same logic applies in Premiere Pro, Nuke, Blender, and Cinema 4D: confirm the input color space on import, then check flat swatches against known values. A simple test card is worth making. Fill a small canvas with your key brand colors, export it, and read the values in each app. If the card matches, your pipeline is trustworthy for the real artwork.
Where Styleframe Fits After Procreate
Many artists use Procreate for style frames, character designs, or hand-painted keyframes, then need those frames to move. Styleframe is an AI video and motion tool built around artist control rather than one-click output. You drive generation with reference images, video clips, and keyframes, so a Procreate painting can serve as a reference for your generation.
Be realistic about color: reference-driven generation is guided by your images, but it isn't a color-managed paint tool, and you shouldn't expect exact hex fidelity on every pixel. Treat the output the way you'd treat any footage that needs to match a spec. Export the image sequence, bring it into After Effects or Nuke, check key colors against your palette, and make corrections in your usual grade or color-correction stage.
This keeps the division of labor clear. Procreate owns the precise, hand-controlled color decisions. Styleframe extends those frames into motion. Your compositing app remains the place where final color is locked.
A Quick Checklist for Exact Colors
- Choose the canvas color profile before painting.
- Enter hex or RGB values on the Value tab, or sample with the Eyedropper from a clean, flat area.
- Save the colors to a named palette.
- Use full-opacity, solid brushes on Normal-mode layers, with Color Dynamics reset.
- Fill large areas with selections instead of strokes.
- Turn off True Tone and Night Shift when judging color.
- Export as PNG or PSD, confirm the profile on import, and read values in the compositing app.
- If frames go through any generative step, re-verify and correct in your grade.
Exact color in Procreate is mostly about removing variables: a known color space, typed values, clean sampling, and a verified export. Do those four things consistently and the colors you pick are the colors that arrive in your timeline.