How to Get Color in Procreate Ink
StyleFrame Team8 min read
To get color into inked artwork in Procreate, keep the linework on its own layer and set it as the Reference layer. Then add a new layer underneath and use ColorDrop (drag the color from the top-right circle into a closed shape) to fill each area. Add shading on clipped layers above the flat color, and use Alpha Lock when you want the ink lines themselves to be colored rather than black.
Set Up the Canvas So Color Stays Editable
Most color problems in Procreate come from mixing ink and fills on one layer. Separate them from the start and every later change becomes simple.
- Ink layer on top. Draw your linework with your preferred inking brush on a dedicated layer. Name it "Ink."
- Color layer below. Add a new layer beneath the ink and name it "Flats."
- Paper layer. Keep the background color layer separate. Hide it before exporting if you need transparency.
Use a canvas size you can reuse downstream. If the art will move into a video project, match the aspect ratio and resolution of your comp now. Resampling after the fact softens clean ink edges.
Choose Your Colors Before You Fill
Procreate's Colors panel has several modes, and each suits a different stage of the job.
- Disc gives you a hue ring with a zoomable saturation area, good for quick exploration by touch.
- Classic offers hue, saturation, and brightness sliders with a square picker.
- Harmony suggests related colors based on your current selection, which helps when you're stuck on a scheme.
- Value exposes numeric and hex inputs. Use it when you have to match a brand color or a swatch from a style guide.
- Palettes stores swatches. You can import palettes or build your own.
The panel also keeps a short history of recently used colors. It's handy for returning to a shade you just left, but it only holds ten and rolls older colors off. For anything you'll need again, save a swatch to a palette.
Sample colors with the eyedropper
When you need to match an existing color from a reference image or your own artwork, touch and hold on the canvas to bring up the eyedropper. Drag to preview, then release to set the color. The ring shows the sampled color against your previous one, so you can compare them. If the gesture doesn't trigger, check Gesture Controls under Preferences in the Actions menu and confirm which activation method is assigned to the eyedropper.
Fill Linework Fast with Reference and ColorDrop
This is the core answer to the question. It turns a closed ink drawing into flat color in a few drags.
- Tap the Ink layer and choose Reference. Procreate now reads the lines on that layer when you fill, even though you're working on another layer.
- Select the Flats layer underneath.
- Pick a color. Drag from the color circle at the top right of the interface and drop it inside a closed shape.
- Keep your finger or pencil held after dropping. Procreate shows the Color Fill Threshold at the top of the screen. Slide to adjust until the fill reaches the line edges without leaving a halo.
- Repeat for each region.
If the fill leaks into the wrong area, you have a gap in the ink. Zoom in, close the gap on the Ink layer with a small stroke, and drop again. Raising the threshold slightly can also help with anti-aliased edges, but too high will bleed past thin lines.
Fix halos around the lines
Light fringes between ink and fill are common. Two quick solutions:
- Put the Ink layer's blend mode on Multiply so any slight gap shows through as darker rather than white.
- Fill slightly beyond the line by raising the threshold, since the Ink layer sits on top and hides the overlap.
Color the Ink Itself
Black linework isn't always the right call. Colored lines often look more natural, especially against saturated fills.
Alpha Lock method
- Select the Ink layer.
- Open the layer menu and tap Alpha Lock (or use a two-finger swipe right on the layer).
- Choose a color and paint over the lines. Only the existing ink pixels change.
You can use a different color per region, such as darker brown lines around a warm skin tone, by painting inside the alpha-locked layer with a soft or hard brush.
Fill layer method
Drop a color on the Ink layer while Alpha Lock is on. The whole drawing's linework switches to that color at once. This is a fast way to test whether colored linework suits the piece before you commit to painting individual areas.
Add Shading and Light Without Wrecking Your Flats
Once the flats are in place, build depth on separate layers above them.
- Add a new layer above Flats.
- Tap the layer and choose Clipping Mask. Anything you paint on it now appears only where the layer below has pixels.
- Set the blend mode to Multiply for shadows or Add/Screen for highlights.
- Paint with a soft or textured brush at modest opacity.
Keep shadows and highlights on different clipped layers. That lets you tweak opacity per layer, and it makes it easy to re-color the flats later because the shading follows automatically.
For consistency across a whole piece, add one shadow layer clipped over all the flats rather than shading each object individually. A single unifying shadow color, often a desaturated purple or blue instead of plain black, tends to make a palette feel cohesive.
Adjust Color After the Fact
You don't have to get color right the first time.
- Hue, Saturation, Brightness in the Adjustments menu lets you shift an individual layer or the whole artwork. Apply it to the Flats layer to re-color the whole piece.
- Color Balance pushes shadows, midtones, and highlights toward warmer or cooler tones.
- Gradient Map remaps the values of a layer to a gradient, which is a quick way to try different color moods over the same inked drawing.
- Selection plus Color Fill works when you want to change only one object's color without re-dropping.
Use a duplicate layer or a copy of the file when testing big color shifts. Procreate adjustments applied directly to a layer change the pixels, so keep an untouched version in case you want to go back.
Export Colored Ink for Motion and VFX Work
If the artwork is going into After Effects, Premiere Pro, Nuke, Blender, or Cinema 4D, how you export matters.
- Hide the paper layer and export PNG for transparency. Keep the ink and flats visible.
- Export PSD if you want separate layers in After Effects or Nuke. Name layers clearly before exporting so you aren't guessing later.
- Keep ink separate from flats whenever you want to animate them independently, for example boiling lines over static color.
- Check the color profile before exporting. Color shifts between an iPad display and a color-managed composite are common, so compare in your target app before you commit.
For frame-by-frame work, Procreate's animation tools can help you rough out a sequence, but heavy compositing and effects usually belong in your main pipeline.
Where Styleframe Fits After the Inking Is Done
Procreate is where you decide how the drawing looks. Styleframe is an AI video and motion tool that can help you carry that look into motion without redrawing every frame, guided by your own references.
A practical workflow:
- Finish a colored, inked keyframe or two in Procreate, such as the start and end poses of a move.
- Use them as reference images in Styleframe to guide the motion between them.
- If you have footage or a 3D render and want it to take on your inked look, use your Procreate art as the style reference.
Every generation is driven by your references, clips, and keyframes. Your compositing workflow stays as it is. It's a complement to Procreate and your comp, not a replacement for either.
Common Problems and Quick Fixes
- Fill won't stay inside the lines. Check that the Ink layer is set as Reference and that there are no gaps. Adjust the Color Fill Threshold.
- ColorDrop fills the whole canvas. The Reference layer isn't set, or the Fill layer is the Ink layer itself. Select the Flats layer and try again.
- Colors look different after export. Compare the exported file in your target application, and check color profile settings before you export.
- Can't find the color you used earlier. Only ten recent colors are kept in history. Save recurring colors as swatches in a palette.
- Shading spills outside the shapes. The layer isn't clipped. Enable Clipping Mask or use Alpha Lock on the layer below.
Quick Workflow Recap
- Ink on one layer, flats on another beneath it.
- Set the Ink layer as Reference.
- Pick colors with the Colors panel, Palettes, or the eyedropper.
- ColorDrop each region and tune the threshold.
- Use Alpha Lock to change the line color.
- Add clipped Multiply and Add layers for shading and light.
- Adjust with Hue, Saturation, Brightness, or Gradient Map.
- Export with layers or transparency to continue in your motion pipeline.
Following this structure means color is never baked into the drawing. You can change a palette late in the process, hand layered files to a compositor, or feed the finished art into a motion workflow as a reference without redoing the work.