How to Get Canvas Texture on Procreate
StyleFrame Team8 min read
To get a canvas texture in Procreate, import a canvas image as a layer (Actions > Add > Insert a photo or Insert a file), scale it to cover the whole canvas, and move it to the top of the layer stack. Then set its blend mode to Multiply or Overlay and lower the opacity until the weave is visible without muddying your colors. For texture that reacts to each brushstroke, change the grain source in Brush Studio instead. This is also the right place to start if you're building painted stills or styleframes that will later move in After Effects.
Method 1: Add a canvas texture as an overlay layer
This is the fastest approach and works on finished artwork or on a piece in progress.
- Get a texture image. Use a high-resolution photo or scan of canvas, linen, or paper. Save it to Photos or Files so Procreate can see it.
- Insert it. Tap the wrench (Actions), choose Add, then pick Insert a photo for the camera roll or Insert a file for Files. You can also drag the image in from another app using Split View.
- Size it. With Transform active and Uniform selected, scale the texture so it covers the whole canvas. Uniform prevents the weave from stretching.
- Position it. Drag the layer to the top of the stack so it affects everything beneath it.
- Change the blend mode. Tap the "N" on the layer and choose Multiply. Linear Burn and Overlay are alternatives.
- Adjust opacity. Texture is usually most convincing at low values, so start around 10–30% and work from there.
If Insert a file returns nothing, the usual cause is the wrong folder or textures that aren't actually stored in Files. Use Insert a photo if the images are in your camera roll.
Where to find canvas textures
You don't need to buy a pack to get started.
- Your own scans or photos. Photograph a real canvas, linen, tablecloth, or wall in flat, even light. This gives you something nobody else has.
- Free stock sites. Unsplash and Pixabay both carry paper and fabric textures.
- Community resources. The Procreate Folio has free paper and canvas texture sets shared as high-resolution PNGs.
- Paid packs. Marketplaces and independent brush makers sell texture sets, some of them seamless so they tile cleanly.
Check the license on anything you plan to use commercially. Client work raises the stakes.
Choose the right blend mode
The most common complaint is that the texture washes out the artwork. Any visible texture layer will change the colors beneath it. Blend modes let you control how.
- Multiply darkens. White areas of the texture have no effect, so a near-white canvas image adds grain without shifting hue. This is the default for most people.
- Overlay increases contrast and keeps brightness more intact, though it can push color more than Multiply.
- Linear Burn is stronger than Multiply and suits rougher, more dramatic texture.
A reliable fix for dulled colors is to stack the texture twice. Put one copy on Multiply to make the weave visible, then a second copy on Overlay above it to restore some brightness. Keep both at low opacity, often around 10%.
If the texture has a color cast, such as a yellowish canvas, reduce its saturation first (Adjustments > Hue, Saturation, Brightness) so it doesn't tint your illustration. Near-white, desaturated textures are the safest choice for Multiply.
Match the texture to your canvas
Resolution and scale decide whether the texture looks like real canvas or like a filter.
- Use a texture at least as large as your canvas. Upscaling a small image softens the weave and makes it look blurry.
- Check the scale of the weave. A canvas texture scaled too large looks like burlap, and one scaled too small looks like noise. Compare it with the size of your brushstrokes.
- Tile if you must. For a seamless texture on a larger canvas, duplicate the layer, use snapping to align the edges, then merge the copies. Seamless textures make this painless. Non-seamless ones will show visible seams.
- Rotate to break repetition. If you stack two textures, rotate one 90 degrees so the weave patterns don't line up and create moiré.
For video, set your canvas to your delivery resolution, for example 3840 × 2160 for UHD.
Method 2: Build canvas texture into the brush
If you want the surface to interact with each stroke, work with grain instead of an overlay.
Stock brushes already include a brush texture, and many painting and sketching brushes have a paper or canvas grain built in. The painting set and the pastel brushes in the sketching set are good places to start looking for an oil or canvas feel.
To customize:
- Duplicate the brush first. Stock brushes can change between Procreate versions, so edit a copy.
- Open Brush Studio by tapping the brush.
- Edit the Grain settings. Swap the grain source for a canvas option or import your own texture image as the grain.
- Test the behavior. Switch between moving and texturized grain to decide whether the texture travels with the stroke or stays fixed to the canvas, and adjust scale and depth.
Fixed (texturized) grain behaves like paint catching on a real weave, so it's usually the closer match for canvas. Moving grain follows the stroke and behaves more like a stamped pattern.
You can combine both approaches. Use a grain-aware brush for the painting, then add a subtle overlay for overall surface unity.
Keep the texture non-destructive
Once texture is baked into your paint layers, you can't change it later. A few habits avoid that.
- Keep the texture on its own layer above everything, or in its own group, so you can toggle, swap, or lower it at any time.
- Use a clipping mask if the texture should only affect part of the artwork, such as the background but not the lettering.
- Save an untextured version. Export one copy with the texture hidden and one with it visible. That gives you flexibility if a client wants it cleaner.
- Merge only at the end, and only on a duplicate.
Taking a Procreate canvas look into motion
For motion designers, the texture question doesn't end at export. A flat canvas texture that's baked into every frame of an animation can look wrong. If the paint moves but the weave stays glued to the surface, you may want that. If the whole image moves but the weave doesn't, it reads like a dirty window. Decide which one you intend.
Some practical approaches in a compositing pipeline:
- Export layers separately. Export the illustration without the texture layer, or export a layered PSD, and add the canvas texture in After Effects. A texture layer set to Multiply or Overlay there can be scaled, offset, or held static on its own, and you can adjust it across the whole comp.
- Decide how the surface behaves. A fixed texture over moving paint suggests a canvas surface. A texture that travels with the camera or artwork suggests the artwork is the surface. Pick one deliberately.
- Vary the texture subtly. A very slight offset or alternation between a few texture frames at low opacity can mimic the subtle variation of film grain or hand-made animation, but test it, because it can also add unwanted flicker.
- Match your grade. Apply texture before or after color correction depending on whether you want it to take on the grade. Compare both.
Where Styleframe fits
If you want a Procreate painting to become moving footage that keeps its hand-painted character, Styleframe can help with that step. It's an AI video and motion tool built around artistic control rather than one-click output. You can use your textured Procreate stills as reference images for Restyle or Ink-and-Paint, which are reference-driven style transfer, so new frames follow your look instead of a generic one. With Frames-to-Video, you set keyframes and the motion is built between them, so you decide what the first and last frames look like.
Every generation is driven by your references, clips, and keyframes, and iteration is non-destructive, so you can revisit a version without losing earlier ones. Because Styleframe exports image sequences, the result drops into your existing After Effects or Nuke comp, where you can add the canvas texture layer, grade, and finish as usual. Your compositing workflow stays intact, and Styleframe replaces none of it.
It's not a substitute for painting the keyframes well in Procreate. It extends strong source art into motion and gives you more control over how that happens.
Troubleshooting common problems
- Texture looks too strong. Lower the opacity, desaturate the texture, or try Overlay instead of Multiply.
- Colors look dull. Use the Multiply-plus-Overlay double stack, or brighten the artwork slightly beneath the texture.
- Texture looks blurry. The source image is too small for your canvas. Use a higher-resolution version.
- Visible seams. Use a seamless texture or build the tile with snapping and then merge.
- Texture covers everything, including things you wanted clean. Put the texture in a group with a mask, or paint out areas with a soft eraser on a mask.
- Texture disappears when exporting. Make sure the layer is visible and that the blend mode survives your export format. If you're handing off to After Effects, a layered PSD or separate exports are safer than a flattened file.
Quick summary
For a quick canvas look, insert a texture image, place it on top, set it to Multiply, and drop the opacity. For a more convincing result, use grain in Brush Studio so the texture responds to strokes. Keep the texture on a separate layer so you can adjust it, and if the work is headed into motion, export it separately so you can control how the surface behaves in After Effects or Nuke.