How to Fix Pixelated Lines in Procreate
StyleFrame Team8 min read
Pixelated lines in Procreate almost always come from too few pixels on the canvas, not from the DPI value. Create the canvas at roughly 3000 px or more on its long side, draw with a crisp inking brush like Studio Pen, avoid scaling line layers up, and export as PNG rather than JPEG. Check sharpness at Actual Size (100%) before you decide something is broken, because zoom level alone can make clean lines look rough.
Why Procreate Lines Look Pixelated
Procreate is a raster app. Every stroke is baked into a fixed grid of pixels, so the sharpness of a line is limited by how many pixels you have to describe it. A hairline at the edge of a 1,500 px canvas gets only a few pixels of width, and the anti-aliasing has little room to smooth the edge.
DPI is the setting people blame most often, and it is mostly a print instruction. It tells a printer how densely to place the pixels you already have. It does not add pixels. A 5 x 5 inch canvas at 300 DPI is 1,500 x 1,500 pixels, and a 10 x 10 inch canvas at 300 DPI is 3,000 x 3,000. The second one has four times the pixels, and that is what you see on screen.
For motion work this matters more than for illustration. Your line art will be placed in a 1080p or 4K comp, animated with scale moves, and possibly rendered through a compositor. Every one of those steps resamples your pixels, so whatever softness exists at the source gets magnified later.
Fix 1: Start With a Bigger Canvas
This fixes the problem more often than anything else. A canvas around 1,000 px wide shows obvious stair-stepping on fine lines, and 3,000 px is a sensible minimum for clean line work. Artists who ink for print sometimes go much higher, with one rule of thumb shared by artists being 600 DPI at final size for line art. For screen delivery, think in pixels instead:
- Know your delivery size. If the line art will fill a 3840 x 2160 frame, draw it at least that large.
- Leave room for moves. If the shot includes a push-in, a scale-up, or a pan across a large illustration, draw at 1.5x to 2x the largest size the art will ever appear on screen.
- Check the pixel dimensions, not just inches and DPI. Confirm the pixel numbers before you start.
There is a cost. Procreate reduces the maximum layer count as canvas size grows, and the exact limit depends on your iPad model. If you hit that wall, split the work: keep line art on one big canvas, and build color, backgrounds, and texture elsewhere (for example, in After Effects).
Fix 2: Stop Scaling Line Layers
Every resize, rotate, or warp resamples the pixels. Scaling up cannot invent detail, it only stretches what exists, and repeated transforms compound the softness.
Two practical habits help:
- Change the interpolation setting. In Procreate's Transform tool, the bottom toolbar includes an Interpolation option. Nearest Neighbor tends to give jagged edges on line work. Bilinear or Bicubic usually gives smoother results when you do have to resize.
- Separate drafting from final inks. Do the rough construction, repositioning, and resizing on a draft layer. When the composition is locked, lower its opacity and ink the final lines on a new layer, with no further transforms. Re-inking is sometimes faster than trying to rescue a layer that has been resampled several times.
The same principle applies when you place artwork from other sources. Dropping a small sticker or logo into a Procreate canvas and enlarging it will always look pixelated, and the fix is a higher-resolution source, not a different brush.
Fix 3: Judge Lines at Actual Size
Before you rebuild a file, make sure the pixelation is real. If you're zoomed far into a canvas, you'll see individual pixels on any raster image. If you're zoomed far out on a very large canvas, the display downsamples and can introduce its own artifacts.
Add the Actual Size command to the QuickMenu and use it for any quality judgment. Also note that QuickShape previews can look sharper than the committed result. While you hold the stroke, the preview is drawn to match your screen's pixels. Once you lift, the shape is rendered into the canvas grid at the canvas's resolution. A visible change at that moment is normal and usually points back to canvas size or zoom level.
Fix 4: Use the Right Brush and Steady the Stroke
Textured and soft brushes (airbrushes, charcoal, grain-based inkers) deliberately produce fuzzy or broken edges. For clean outlines, work from the Inking set. Studio Pen and Technical Pen are the usual choices, and Studio Pen adds pressure sensitivity, so light pressure gives thin lines and heavier pressure gives thicker ones.
If the problem is wobble rather than pixelation, open Brush Studio and adjust the stabilization settings:
- StreamLine smooths the stroke as you draw.
- Stabilization averages out jitter in the line.
- Motion Filtering achieves a similar result with a different algorithm.
Moderate values keep lines feeling hand-drawn. Very high values can make strokes lag or feel mechanical, which is rarely what you want for character animation.
Line weight variation helps too. Uniform Monoline strokes magnify the look of any edge imperfection, while tapered or varied lines read as more deliberate.
Fix 5: Export Without Losing Quality
An export step can undo good work:
- Use PNG for line art. JPEG compression blurs fine details and introduces artifacts around high-contrast edges, which is exactly what thin dark lines are.
- Export at native canvas size. Don't let an intermediate app resize it.
- Keep transparency if you plan to composite the line art over other layers.
- Avoid screenshots and social-media-compressed copies as sources. Screenshots are limited to your screen's pixels.
For animation, export frames as a numbered PNG sequence, or export each layer group separately, so you can control sequencing and timing in your compositing app.
Keeping Procreate Line Art Sharp in After Effects, Premiere Pro, and Nuke
Once the file leaves Procreate, the same pixel math applies. A few habits protect the work:
- Match the comp to the art. Import line art at its native pixel size and keep layer scale at or below 100% where you can. If you need to scale up, return to Procreate and redraw at a larger size instead.
- Don't rely on Continuously Rasterize. That switch helps vector and Illustrator layers stay sharp as they scale. A PNG from Procreate stays raster, so it does not gain resolution.
- Check resampling quality. In After Effects, layer sampling quality and the comp's rendering settings influence how scaled raster layers look. In Nuke, the filter on a Transform node (cubic, Lanczos, and so on) changes edge softness and ringing.
- Watch for halos. Dark fringes or light edges around lines usually point to an alpha interpretation mismatch (straight versus premultiplied). Check how the footage is interpreted at import.
- Consider vectorizing for hard scaling needs. If a logo-like or bold line drawing must scale heavily, tracing it to vector in Illustrator is often more reliable than painting a massive raster canvas. This suits bold, clean shapes better than expressive ink lines.
Premiere Pro behaves similarly. Scaling a still image far above 100% in a sequence will soften it, so prepare artwork at the sequence's resolution or higher.
Where Styleframe Can Help in a Line-Art Pipeline
Styleframe is an AI video and motion tool built for artist-directed control. It works from reference images, video clips, and keyframes, not from one-click prompts. If your pixelated lines are already baked into a drawing or a set of frames, redrawing at higher resolution is still the cleanest fix. But a few Styleframe tools are relevant in the same workflow:
- Ink-and-Paint and Restyle apply a reference-driven style to footage or frames, which is useful if you want a consistent hand-inked look across a sequence instead of redrawing each frame.
- 4K Upscale produces 4K output for frames or clips that need to reach delivery resolution. Results depend on your source, so test it on your own line art and compare against the original.
- Frames-to-Video builds motion between keyframes you define, so you can keep control of the poses and timing while producing in-between frames.
- Remove Background helps isolate line art or characters when you need clean mattes for compositing.
Iteration is non-destructive, so you can try a style or upscale pass without overwriting your source. Output exports as image sequences, so it slots into the compositing setup you already use, whether After Effects or Nuke. Procreate remains the place to draw. Styleframe fits downstream, when you need stylization, motion, or resolution on top of what you've drawn.
Quick Troubleshooting Checklist
If lines still look rough, work through this list in order:
- Check pixel dimensions. Is the long side at least about 3000 px, and large enough for your final delivery?
- View at Actual Size. Make sure you're not zoomed in too far or out on a huge canvas.
- Check the brush. Switch to Studio Pen or Technical Pen to rule out a textured brush.
- Review the transform history. If the layer was scaled up or resized several times, redraw it on a fresh layer. Set interpolation to Bilinear or Bicubic for future resizes.
- Check the export format. Use PNG, not JPEG, and export at native size.
- Check your comp. Confirm layer scale in After Effects, Premiere, or Nuke, and keep it near or below 100%.
The same few causes explain almost every case. If a 3,000 px or larger canvas still looks pixelated at Actual Size with an inking brush, the issue is usually a transform, an export, or the comp scale, and the checklist above will find it.