How to Fix Pdf Margins in Procreate
StyleFrame Team8 min read
Procreate has no built-in bleed or margin setting, so you fix PDF margins by rebuilding the canvas at the final trim size plus bleed (usually 3 mm or 0.125 in per side), keeping important content inside a safe area, and exporting a PDF at the highest quality. If the margins are already wrong in an exported PDF, either move the artwork onto a correctly sized canvas or correct the page box in a PDF editor such as Acrobat. Most margin problems come from a canvas that doesn't match the print spec, or from the print dialog rescaling the file.
Why PDF margins go wrong in Procreate
Procreate is a raster painting app, not a layout tool. It has no dedicated bleed tool or printer marks. That causes a handful of recurring problems:
- The canvas is the wrong size. Default canvas presets rarely match a print spec, so the PDF page doesn't match the paper or the printer's template.
- Bleed was never added. Without extra image area past the trim line, a trimmed page can show thin white slivers at the edges.
- Content sits too close to the edge. Printers can't print to the paper edge, and high-volume trimming shifts slightly from page to page, so anything near the border risks being cut.
- The print dialog rescales the file. "Fit to page" or "shrink to printable area" settings shrink the artwork and create margins you didn't design.
- The color or resolution setup is off. A canvas below 300 DPI doesn't change margins directly, but it forces resizing later, which blurs the work and tempts people to rescale.
Diagnose which of these applies before you change anything. The fix differs for each.
Step 1: Find the correct size and margin numbers
Start with your printer's template or spec sheet. It overrides any rule of thumb. If you don't have one, these are common defaults:
- Bleed: at least 0.125 in (3 mm) beyond the trim on every side.
- Safe margin: at least 0.5 in from the trim edge for text and important details.
- Gutter: for books and zines, add extra inner margin where two pages meet at the spine, because some of that area disappears into the binding.
Example canvas sizes with bleed:
At 300 DPI, the US Letter canvas works out to 2625 × 3375 px. Work in whichever unit your printer uses.
Step 2: Rebuild or resize the canvas
If you haven't started the artwork yet, create a new custom canvas at the trim size plus bleed, at 300 DPI. Set the color profile deliberately. If your printer wants CMYK, check whether it names a specific profile. Otherwise work in RGB and convert in a layout or print tool later.
If you're mid-project, don't scale the canvas up to add bleed. Resizing with resampling softens the artwork and shifts everything inward. Instead:
- Open Procreate's canvas resize tool.
- Extend the canvas without scaling the artwork, if the tool's settings allow it.
- Enter the new dimensions or drag the handles outward, then confirm.
- Extend backgrounds, textures, and any element that should run to the edge into the new bleed area.
If the canvas gets messy, a cleaner route is to create a fresh canvas at the correct size and paste your layers in. Check afterward that nothing changed scale.
Step 3: Visualize the bleed and safe area
Because Procreate doesn't show bleed or margins natively, you have to build visual guides.
Use the Drawing Guide grid. Turn on Actions > Canvas > Drawing Guide, open Edit Drawing Guide, and set the grid size to match your bleed or margin value. A grid sized to 3 mm, for example, shows you the bleed strip around the edge.
Make a guide layer. A reliable approach:
- Create a second, smaller canvas at the exact trim size, or draw a rectangle at the trim size on a new layer.
- Fill it with a color so you have a clear trim shape.
- On the bleed canvas, select that shape, invert the selection, and fill the outer strip on a separate layer.
- Lower that layer's opacity so you can see the bleed zone without it overwhelming the work.
- Repeat with a smaller rectangle for the safe margin, using a different color.
Keep these guides on their own layers and hide them before export. Name them clearly ("TRIM," "SAFE") so they don't get flattened into the artwork.
You can also import a printer-supplied template as a layer. PDF templates that keep a transparent background are easiest to use this way because you can see your art through them.
Step 4: Place content relative to the guides
With the guides visible, check four things:
- Background color, texture, and imagery run past the trim line into the bleed.
- Text, faces, logos, and anything you can't afford to lose stay inside the safe margin.
- On multi-page projects such as books and zines, inner edges have extra clearance for the gutter.
- Nothing important straddles the trim line, where small trimming shifts would show.
Step 5: Export the PDF correctly
Open Actions > Share, choose PDF, and pick the highest-quality option. Keep your page size consistent with the canvas you built. Some online tutorials describe an "Include Bleed" toggle in this menu, but Procreate doesn't have a dedicated bleed control. Treat any such instruction with caution and verify against your own export.
After exporting, open the PDF on a desktop or in a PDF viewer and check:
- The page dimensions match your canvas, including bleed.
- Edge-to-edge colors extend to the page border.
- The file opens at the size you expect and nothing looks scaled.
When you send the file to a printer, ask whether they want the PDF with bleed and no crop marks, or with marks. Procreate can't generate printer marks.
Fixing margins in a PDF that's already exported
Sometimes you can't go back to the Procreate file, or the export is nearly right. Your options:
- Crop or resize page boxes in Acrobat. The Crop Pages dialog lets you adjust page size and margins. Enlarging the page box adds blank space but doesn't invent bleed artwork, so it's a margin fix, not a bleed fix.
- Move the art to a layout app. Affinity Designer, which one Procreate forum user recommends for this, can import a PSD from Procreate and export a print-ready PDF with bleed, crop marks, and an embedded color profile. This is the right route if your printer requires marks or a specific CMYK profile.
- Correct the print settings. If margins only appear when printing, set the scale to 100% or "Actual size" instead of "Fit." Some users report that duplex printing applies different scaling to the back side, so test a double-sided proof before a full run. Also remember that desktop printers can't print to the paper edge, so a full-bleed result at home may need a borderless-capable printer or trimmed oversize paper.
A final preflight checklist
- Canvas = trim size + bleed, at 300 DPI
- Guides for trim and safe area on separate, hidden-on-export layers
- Edge-to-edge elements extend into the bleed
- Critical content sits inside the safe margin (at least 0.5 in unless your printer says otherwise)
- Color profile matches what the printer asks for
- PDF exported at best quality, then opened and measured
- Print proof ordered when the job is large or the color matters
Where Styleframe fits for motion artists
Many After Effects and Nuke artists use Procreate for illustrated boards, character art, or styleframes, then need the same artwork for both print (posters, title cards, pitch decks) and motion. Margin and bleed discipline helps in both. Keep a layered master at the largest size, and export per-use versions rather than reusing a print PDF in a video comp.
Styleframe, an AI video and motion tool built for artistic control, can pick up from there for the motion side. It doesn't fix PDF margins. It's useful once the print-ready art needs to move.
If you carry the same piece into video, remember that the equivalent of print margins is title-safe and action-safe framing. Keep key content inside those areas when you hand the work off to a comp.
Quick answers
Can Procreate add bleed automatically? No. You add it by making the canvas larger than the trim size and filling the extra area with artwork.
What margin should I use? Follow your printer's spec. Without one, use at least 0.5 in for the safe margin and 0.125 in (3 mm) for bleed.
Why does my PDF have white borders? Either the artwork doesn't extend to the page edge, the printer can't print to the edge, or the print dialog shrank the file. Check the PDF itself first, then the print scaling.
Should I use Procreate for print layout? For single illustrations, yes. For multi-page books, crop marks, or strict CMYK output, finish the layout in a dedicated layout tool.