How to Fix Hue and Saturation in Procreate
StyleFrame Team8 min read
To fix hue and saturation in Procreate, select the layer with the problem, tap the Adjustments (magic wand) icon, choose Hue, Saturation, Brightness, and move the sliders away from their 50% midpoint. Use Hue to shift the color family, Saturation to push toward gray or toward vibrant, and Brightness to rebalance lightness. If only part of the image is wrong, switch from Layer mode to Pencil mode and paint the adjustment in, or isolate the element on its own layer first. Tap the Adjustments icon again to commit.
What the Hue, Saturation, Brightness controls do
Procreate's HSB adjustment is the simplest way to make quick color adjustments in the app. It shows three sliders, all resting at the midpoint, which represents the current state of the layer:
- Hue moves the whole layer around the color spectrum. A small nudge turns teal toward green or purple toward red, and a large move changes the color family entirely.
- Saturation controls color strength. Dragging left drains color toward grayscale, and dragging right pushes toward maximum vibrancy.
- Brightness sets overall lightness or darkness. Pushing it far enough in either direction crushes the image to black or blows it out to white.
The adjustment applies to the active layer only. That is the most important fact to keep in mind, because it determines how you should organize artwork if you expect to fix color later.
Step-by-step: fix the wrong hue
- Select the layer containing the color you want to change. If several elements share one layer, jump ahead to the section on isolating them.
- Tap the Adjustments icon (the magic wand) and choose Hue, Saturation, Brightness.
- Make sure Layer mode is selected (more on Pencil mode below).
- Drag the Hue slider slowly. Small moves reveal how the whole layer rotates through the spectrum, so find the neighborhood first, then refine.
- Tap the Adjustments icon again to commit and leave the tool. To commit and stay in the tool, tap the canvas to bring up Adjustment Actions and choose Apply.
Hue shifts move every color on the layer by the same amount, so a layer with skin tones, shadows, and a background will shift all of them together. If one color looks right and another looks wrong, a global hue move won't fix it. Split them onto separate layers or use a targeted method.
Step-by-step: fix washed-out or over-saturated color
Saturation problems usually show up in one of three ways.
Colors look dull after darkening. Lowering Brightness tends to make color look muddy. Compensate by raising Saturation a little. Do it in small steps and compare against the neighboring elements, such as a hand layer matched to a face layer.
Colors look fine on the iPad but muddy elsewhere. Artists who work with a dark interface and high screen brightness often find that artwork looks low-contrast in daylight or against light backgrounds. The fix is usually tonal rather than chromatic. Open Curves and lift the diagonal line slightly to brighten and add contrast, then use the Saturation slider to pull back any excess vibrancy.
Colors are overcooked. Drag Saturation left a few points at a time. Stop before the layer starts to look flat. If a single element is the problem, isolate it rather than desaturating the whole piece.
Fix: the Hue slider jumps when you use Pencil mode
One common frustration is that Pencil mode starts with Hue at about 30% instead of the 50% midpoint. If you only wanted to tweak saturation or brightness, you can paint with a hue shift you never intended and get a completely different color.
Procreate's team has described this as a deliberate design choice, so that painting with the tool produces a visible effect rather than appearing to do nothing. Users have asked for options to change it, but you shouldn't count on the behavior changing. The practical workaround:
- Open HSB and switch to Pencil mode.
- Before you paint anything, check all three sliders and drag Hue back to the middle.
- Then adjust only the slider you actually want.
- Paint over the area to apply the effect.
Make "reset Hue first" a habit whenever you enter Pencil mode.
Fix: only part of the image needs correcting
HSB in Layer mode touches everything on the layer. You have three clean options for partial fixes.
Use Pencil mode
Pencil mode applies the adjustment only where you paint, erase, or smudge. It works well for localized problems such as hot highlights on a face. Paint over the areas, turn down Brightness, then add a little Saturation back if the area looks gray. Commit when the before and after comparison looks right.
Keep elements on separate layers
The most reliable habit is separating elements onto their own layers whenever your layer limit allows. A hand, a shirt, a background, and a prop can each be adjusted without disturbing the rest. It also keeps later changes from becoming a repainting job.
Recolor with a clipped blend layer
For precise control, create a new layer directly above the one you want to change and set it as a Clipping Mask. Change its blend mode to Color, then paint over the areas you want to recolor. The original layer's values and details are preserved, and only the hue and saturation change in the areas you paint. You can erase, repaint, or delete the clipped layer without destroying the underlying art, which makes this the closest thing to a non-destructive hue fix inside Procreate.
Go beyond HSB when sliders aren't enough
HSB is a blunt instrument. When the problem is more specific, reach for these.
Color Balance splits the image into Shadows, Midtones, and Highlights, with sliders pairing Red/Cyan, Green/Magenta, and Blue/Yellow. Midtones are selected by default and are the best place to start for an even correction. This is the tool for problems such as a color cast in the shadows or a highlight that has drifted too warm, which a hue slider can't address without shifting everything.
Curves shows your layer's tonal values as a line on a graph, with a histogram behind it. Bending the line changes contrast and, per channel, color balance. If the colors feel muddy rather than the wrong hue, Curves is usually the right answer.
Recolor lets you replace specific colors in the image and is worth trying before you start repainting.
A useful rule: if the whole layer is the wrong color, use Hue. If it is the right color but the wrong strength, use Saturation. If the color is right but looks flat, use Curves. If shadows and highlights disagree with each other, use Color Balance.
Commit, undo, and avoid destructive mistakes
HSB changes are baked into the layer when you commit. Procreate does not keep adjustment sliders live afterward. A few safeguards help:
- Duplicate the layer before a big shift, then hide the copy. You then have a way back that doesn't depend on undo history.
- Use undo carefully. Procreate's gesture-based undo works while you are in the adjustment, but once you have committed and kept working, you are relying on history.
- Do multiple small passes instead of one extreme slider move. Heavy hue and saturation changes can introduce banding or clipping that is hard to see until export.
Colors look different after export
If the color looks right inside Procreate and wrong in After Effects, Premiere Pro, or a browser, the problem may not be the HSB settings at all. Often it is a color profile mismatch. The canvas has its own color profile, and the app you bring the file into may interpret it differently, which looks like a saturation or hue shift.
Before you start recoloring, check these in order:
- Confirm the canvas color profile in Procreate matches what you intend for delivery.
- Export a flattened PNG or layered file and open it in your compositing app with color management enabled.
- Check whether the project's working space is interpreting the file as sRGB or something wider.
- Compare against the original on a calibrated display.
Fixing a profile mismatch with the Saturation slider only hides the problem and will cause trouble again with the next export.
Where Procreate art goes next: motion pipelines
Many motion designers and animators use Procreate for illustration and then move the art into After Effects, Premiere Pro, or Nuke. In that workflow, do the fixes that are inherently about the painting (wrong hue on a character, muddy highlights) in Procreate. Leave global grading decisions, such as the overall look across a sequence, for your compositing app, where adjustments stay editable and consistent across shots.
If you are extending illustrated frames into motion, fix hue and saturation at the source first, since any color problem in your keyframes will carry through the sequence.
Quick troubleshooting checklist
- Hue shift changed everything: the adjustment is layer-wide. Undo, split the element onto its own layer, or use Pencil mode or a clipped Color layer.
- Pencil mode gave a strange color: Hue starts at about 30%. Reset it to the midpoint before painting.
- Nothing seems to happen in Pencil mode: the effect only appears where you paint, erase, or smudge.
- Colors are dull after darkening: add a small amount of Saturation, or use Curves for contrast.
- Colors look different outside Procreate: check the canvas color profile and your compositing app's color management before changing any sliders.
- Need to preserve the original: duplicate the layer, or use a clipped Color blend layer.
Hue, Saturation, and Brightness are fast, but they reward some planning: keep elements separated, change one slider at a time, and know when Curves, Color Balance, or a blend layer is the better tool.