How to Fix Eraser in Procreate
StyleFrame Team8 min read
Many Procreate eraser problems come from a handful of settings: the Erase tool isn't active, Apple Pencil is set to Paint Only in Gesture Controls, the Opacity slider is low, or you're working on the wrong layer. Check them in that order. Tap the Erase icon so it turns blue, open Actions (wrench) > Prefs > Gesture controls and set Apple Pencil to Selected Tool, push the Opacity slider to maximum, and confirm the marks live on the layer you're erasing. If the eraser leaves a faint ghost of the stroke, switch to the Hard Airbrush from the Airbrushing set.
Quick Diagnosis: What Is the Eraser Actually Doing?
The symptom points to the cause, so match yours before changing settings.
A fast first test: erase with your finger. If that works and the Pencil doesn't, the problem is a Pencil-specific setting or the Pencil itself. If neither works, look at layers, opacity, and the brush.
Step 1: Make Sure the Erase Tool Is Actually Active
Procreate has three separate tools, Paint, Smudge, and Erase, and each remembers its own brush. The Erase icon sits in the top right of the canvas, and it should be highlighted blue when active. If you've been painting and tap the canvas expecting an eraser, you're still on the Paint tool.
Tap the Erase icon twice to open the Brush Library for that tool. The brush you pick there applies only to erasing. That's useful, but it also means a broken eraser can come down to a single brush with odd settings, so try a few different brushes under Erase before assuming something is broken.
Step 2: Fix Gesture Controls (Eraser Paints Instead of Erasing)
If the eraser lays down color like a regular brush, the cause is most likely in Gesture Controls.
- Tap Actions (wrench icon) > Prefs > Gesture controls.
- Find the Apple Pencil and Touch settings.
- Set both to Selected Tool.
If Apple Pencil is set to Paint Only, your stylus keeps painting with the Paint tool's brush even when Smudge or Erase is highlighted. This setting can change after an app update, so an eraser that stops working right after updating is worth checking against this setting. Older guides call the menu "Advanced Gesture Controls." It's now just Gesture controls.
While you're in there, open the Smudge tab and check that Apple Pencil isn't switched on there. If it is, the Pencil will smudge instead of paint or erase.
Step 3: Check Opacity, Including the Slider That Moves Itself
The Opacity slider in the left sidebar controls how much the eraser removes. If it's at zero, the eraser looks dead. At partial values, it erases only partially.
The slider can jump to its lowest point by accident, particularly if you use the Undo button just below it. Select the Erase tool, look at the slider, and push it to the top. Then test a stroke.
Step 4: Fix Faint Ghost Strokes and Gray Residue
If the eraser removes most of a line but leaves a light outline, and the opacity slider is already at 100%, the brush itself is the likely cause. Some brushes, including the default Round Brush, map Apple Pencil pressure to opacity. With light pressure, the eraser only removes part of the pixel data. Finger erasing removes everything because there's no pressure mapping.
You have two options:
- Use the Hard Airbrush. From the Airbrushing set, it erases cleanly and is a go-to eraser for some Procreate team members. Select it in the Erase tool's Brush Library, set Opacity to maximum, and vary pressure if you like.
- Build your own eraser. Duplicate the brush you prefer, open its settings, go to the Apple Pencil tab, and remove the pressure-to-opacity response so a light touch erases as fully as a hard one. Assign the duplicate to the Erase tool.
Pressing harder also works as a stopgap, but a dedicated eraser brush saves you from re-fixing this every session.
Step 5: Check Layers (A Common Culprit)
Many eraser problems turn out to be layer problems. Check these:
- You're on the wrong layer. If the paint is on a different layer, the eraser has nothing to remove on the active one. Toggle layer visibility checkboxes one at a time. When the mark disappears, you've found the right layer. Select it and erase.
- Alpha Lock is on. A chequerboard pattern on the layer thumbnail signals Alpha Lock. Tap the layer to open Layer Options and turn it off. With Alpha Lock on, you can't erase or smudge pixels the way you expect.
- A black or colored layer sits beneath. If you "erase" and see black, the eraser may be working perfectly while it reveals a filled layer underneath. Hide the lower layers to confirm.
For artists building assets for compositing, this last case matters. Always erase against a visible transparency checkerboard, not a colored background, so you can see what the eraser is really doing.
Step 6: Stop Stray Marks From Finger Touches
If small dots and smudges keep appearing and you can't erase them, they often come from your finger touching the screen. Fix it at the source:
- Open Actions > Prefs > Gesture controls.
- In the General tab, turn off "Enable painting with finger."
This is best if you use an Apple Pencil. If you use a third-party stylus, turning off finger painting may stop it from drawing, so leave finger painting on in that case. To remove existing marks, find the layer they live on using the visibility toggles from Step 5, then erase them there.
Step 7: Rule Out the Pencil
If you've worked through the settings above and the eraser still fails with the Pencil but works with your finger, test the hardware:
- Switch to the Paint tool and draw with the Brush Pen from the Calligraphy set. It responds to pressure in both size and opacity, so you'll see quickly whether the Pencil registers pressure properly.
- Check whether the Pencil can paint and smudge at all. If not, and Alpha Lock is off, suspect a Pencil or pairing issue.
- Re-pair or recharge the Pencil and restart the iPad.
If the Pencil fails everywhere, it may have a hardware fault, which no Procreate setting will fix.
Step 8: Last Resorts Before Reinstalling
Reinstalling Procreate is rarely necessary. Many eraser problems turn out to be a setting that got toggled accidentally. Before you delete anything:
- Restart the iPad and relaunch Procreate.
- Test the eraser in a different canvas. If it works there, the problem is specific to the first file, usually its layers.
- Confirm your iPadOS and Procreate versions are current.
- Export or back up your artwork and custom brushes, since a reinstall can wipe them if you don't use iCloud.
If nothing works, contact Procreate support with a short screen recording or screenshots showing the canvas with the Layers panel and the Erase tool's Brush Library open. Include your iPad model, iPadOS version, and Procreate version. This speeds up diagnosis considerably.
Why Clean Erasing Matters for Motion and VFX Work
If you use Procreate to make assets for After Effects, Premiere Pro, Blender, or Nuke, such as hand-drawn textures, frame-by-frame animation, mattes, or overlays, a half-working eraser causes problems downstream. Faint residual pixels at low opacity look invisible on a white canvas but show up as soft fringes or ghost edges once the PNG is composited over footage. Before exporting:
- Hide the background layer and inspect the artwork against the transparency checkerboard.
- Erase with a full-opacity brush such as the Hard Airbrush.
- Check each layer individually for stray finger marks.
- Export with transparency intact and test one frame in your compositing app before exporting the full set.
Where Styleframe Fits After You've Fixed the Eraser
Procreate is a drawing tool, and once your layers are clean, the next question is often how to carry hand-drawn work into motion. Styleframe is an AI video and motion tool, and your Procreate artwork can serve as reference material for it. As with any asset, clean inputs help: a drawing with leftover ghost strokes or stray marks gives the tool noisy reference material, so the eraser fixes above are worth applying first.
Quick Checklist
- Erase icon is blue (tool active).
- Gesture controls: Apple Pencil and Touch set to Selected Tool.
- Smudge tab: Apple Pencil not enabled.
- Opacity slider at maximum.
- Eraser brush swapped to Hard Airbrush or a duplicate with pressure-to-opacity removed.
- Correct layer selected, Alpha Lock off, no filled layer underneath.
- "Enable painting with finger" off if using an Apple Pencil.
- Pencil tested with the Brush Pen, and finger erasing tested for comparison.
- Restart and update before reinstalling, and contact support with screenshots if needed.
Work through the list in order and you'll likely find the cause.