How to Fill Text with Image in Procreate
StyleFrame Team8 min read
To fill text with an image in Procreate, add your text, place the photo directly above the text layer, and tap the photo layer and choose Clipping Mask. The image then shows only inside the letterforms, and you can still move, scale, or swap it without losing anything. If you want a flattened result instead, select the text layer's pixels, copy the image, and paste it so the fill becomes its own layer.
What You Need Before You Start
Procreate treats text as a vector layer until you rasterize it. Vector text stays editable (font, spacing, alignment), and according to Procreate's own documentation, both vector and raster text accept clipping masks and layer masks. That makes clipping the best default, since you can keep editing the copy after the fill is applied.
Prepare these before you begin:
- A canvas sized for the final destination. If the lettering will end up in a 4K timeline, build the canvas at that scale or larger. Scaling up a small Procreate canvas later softens the edges of your letters.
- A high-resolution source image. Glitter, marble, foliage, paint scans, and film textures all work. Low-resolution images fall apart once they are scaled to cover a big headline.
- A heavy, wide typeface. Thin strokes show very little of the image. Bold sans serifs and slab styles give the fill room to read.
Method 1: Clipping Mask (Non-Destructive)
This is the method to use when the client might change the wording or the texture.
- Create the canvas. Pick your dimensions and open it.
- Add the text. Tap the Actions (wrench) icon, choose Add, then Add Text. Type your copy, then tap Edit Style (or the "Aa" button above the keyboard) to choose a font and adjust size, tracking, and leading.
- Insert the image. Go back to Actions > Add > Insert a Photo and pick your texture. It arrives as its own layer.
- Position the image above the text. In the Layers panel, the photo should sit directly over the text layer.
- Scale the image to cover the letters. Use the Transform tool to enlarge or move it so the part of the picture you want sits behind the words. It only needs to cover the text's footprint, but extra margin gives you room to reposition.
- Apply the clipping mask. Tap the image layer and choose Clipping Mask. The image now takes the shape of the text below it.
Because the mask is live, you can double-tap the text to retype it and the fill updates. You can also select the image layer and drag it to change which part of the photo shows through. A Hue/Saturation or Curves adjustment on the image layer changes the look without touching the text.
Filling Individual Letters Differently
If you want a different image in each letter, you need each letter on its own layer. Rasterize the text, select a single letter with the Selection tool, then cut and paste it to a new layer. Repeat for each letter, then put a separate image layer above each one and clip it. This is useful for collage-style titles or when each character needs its own texture. The tradeoff is that the text is no longer live, so finalize your kerning and copy first.
Method 2: Select and Paste (Flattened Fill)
This approach bakes the image into a new layer shaped like the text. It is handy when you want to paint over the result, distort it, or merge it into other artwork.
- Add the text and insert your image as above, with the image layer below the text layer or hidden temporarily.
- Tap the text layer to open its options and choose Select. This creates a selection in the shape of the letters.
- Tap the image layer and choose Copy, then go to Actions > Add > Paste (or use the three-finger swipe gesture to open the copy and paste menu).
- A new layer appears containing only the part of the image that falls inside the selection. Hide the original image layer to see it.
The result is a standard raster layer, so you can use any Procreate tool on it, including Adjustments, Liquify, and brushwork. The cost is that changing the wording means repeating the process.
Alpha Lock as a Third Option
If you have already rasterized the text, Alpha Lock gives you a quick route. Turn it on for the text layer, and anything you paint or paste into that layer is limited to the existing pixels. You can then paint texture in with brushes, which is better when you want hand-made variation rather than a photographic fill.
Adding Depth: Shadows, Outlines, and Bevels
A flat photo fill can look pasted-on. A few small additions help it sit properly:
- Drop shadow. Duplicate the original text layer, place it below the filled layer, fill it with a dark color, and nudge it a few pixels. Use Gaussian Blur under Adjustments for softness.
- Outline. Vector text has outline options in the Edit Style panel. If you are working on raster layers, use a duplicate layer expanded with a selection and filled behind the main layer.
- Contrast control. Busy images can swallow letter shapes. Add a Curves adjustment to the image layer, or place a subtle dark stroke around the text so the edges stay legible against whatever sits behind it.
- Texture matching. If the lettering will sit on a photograph, add grain to the filled text so it matches the background.
Exporting for a Motion Pipeline
For motion designers, the Procreate file is usually an asset, not the final deliverable. A few export habits save time later:
- Export with transparency. Turn off the background color layer before exporting, then use PNG for flat lettering. Layered PSD export preserves the shadow, fill, and outline as separate layers, which gives you control inside After Effects or Photoshop.
- Keep elements separate. Export the fill, shadow, and any highlight layers independently if you plan to animate them differently.
- Check edges at 100%. Zoom in on the letter edges before export. Halos from a poorly scaled image or an anti-aliased selection are much easier to fix in Procreate than after the file is composited.
If the text needs to move, consider whether Procreate should do the fill at all. In After Effects, a similar effect can be built with a track matte, using the image layer under the text layer. That keeps the type live and lets you animate the texture sliding through the letters or swap images on a timeline. Procreate works better when the texture is hand-painted, the lettering is part of an illustration, or you want a fast static design for a thumbnail, title card, or storyboard frame.
Common Problems and Fixes
The image does not appear inside the text. The image layer is probably not directly above the text layer, or the clipping mask was applied to the wrong layer. Check the layer order and look for the small arrow indicating the clip.
The edges look jagged or fuzzy. Your canvas is likely too small for the type size, or you scaled a low-resolution image. Rebuild at a higher resolution.
The text will not let you use a tool. Some tools require pixel data. Rasterize the text from its layer options first, accepting that it will no longer be editable as type.
The fill looks flat. Add a shadow, adjust the image's contrast, or lift highlights on a separate layer set to Add or Screen.
The pasted fill has the wrong part of the image. Undo, move the image under the text so the right region lines up, then repeat the select-and-paste steps.
Taking Filled Type Further with Styleframe
Once you have a filled title in Procreate, you may want it to move or take on a different look without rebuilding it by hand. Styleframe is an AI video and motion tool built for artists who need control rather than one-click results, and it can pick up where your Procreate asset leaves off.
A few practical ways it fits:
- Restyle and Ink-and-Paint. Use your filled lettering as a reference image, and apply a reference-driven style transfer so the texture and linework carry into a different visual treatment. The look comes from your references, not a generic prompt.
- Frames-to-Video. Export two or more keyframes of the lettering (for example, a clean version and a distorted or textured version) and let Frames-to-Video build the motion between them. You decide the start and end states.
- Remove Background. If your texture work sits on a busy backdrop, isolate the lettering cleanly before compositing.
- 2D-to-3D and Turntable. For dimensional titles, turn a flat design into a 3D form and rotate it with a turntable move.
- 4K Upscale. Increase the resolution of a modest Procreate export.
You can keep your matte, grading, and finishing workflow, and use Styleframe for the generative step that would otherwise be done frame by frame.
Quick Workflow Summary
- Build the canvas at final-delivery scale.
- Add text with a heavy typeface and set the style.
- Insert the image above the text layer.
- Clip it to the text for a live, editable fill, or select and paste for a flattened one.
- Add shadow, outline, and contrast adjustments so the fill sits well.
- Export with transparency, keeping layers separate if the piece will be animated.
- Animate in After Effects with a track matte, or extend the design in Styleframe when you want stylized motion between keyframes.
Mastering the clipping mask covers most jobs, and the select-and-paste and Alpha Lock methods handle the cases where you need to paint or distort the fill. Knowing which to use, and when to hand the asset off to a compositor, keeps filled type flexible all the way to the final render.