How to Fill Only a Specific Area in Procreate
StyleFrame Team8 min read
To fill only a specific area in Procreate, make a selection around it (Automatic Selection works well for clean line art), switch on Selections → Color Fill, and choose your color. The fill stays inside the selection. For paint or shading that should stay inside existing artwork, use Alpha Lock or a Clipping Mask instead. ColorDrop is the quickest option when the area is already closed off by line work.
The right method depends on whether you want a one-time fill, a persistent boundary, or an edit you can change later. That choice matters most when the art is headed for After Effects, where layers, edges, and alpha channels have to survive the trip.
Method 1: Selections with Color Fill
This is the most controlled way to restrict a fill to one region.
- Tap Selections in the top toolbar.
- Choose a selection mode from the tabs at the bottom: Automatic, Freehand, Rectangle, or Ellipse.
- Tap Color Fill so it highlights blue.
- Pick your color from the Colors icon at the top right.
- Make the selection. The color fills the area as soon as the selection is complete.
Some things to know:
- Color Fill works on a single layer only. It won't fill onto a layer group, so select an individual layer first.
- The setting persists. Procreate remembers Color Fill when you leave and re-enter Selections, so turn it off when you're done or you'll fill things by accident.
- Feather softens the edge. If you want a vignette or a soft glow rather than a hard shape, apply Selections → Feather before filling.
Pick the mode for the job. Rectangle and Ellipse suit geometric shapes. Freehand suits irregular shapes you draw yourself. Automatic is best when your artwork already defines the boundary.
Method 2: Automatic Selection for line art
Automatic Selection detects a region based on the pixels you tap. Tap and hold inside the area, then slide left or right to widen or tighten what it picks up. You get a live selection you can inspect before committing.
Once the area is selected, you can:
- Fill it with Color Fill.
- Paint freely, with strokes confined to the selection.
- Cut it to its own layer with the three-finger swipe-down menu, then choose Cut.
- Clear just that region using the clear gesture. With an active selection it clears only the selected part of the layer rather than the whole layer.
That last point answers a common frustration. Artists often expect the "Clear" button in the Selections toolbar to erase the selected pixels, but it only removes the selection outline. To erase, use the clear gesture or Cut.
Fixing gaps in the selection
If the Automatic selection leaks into neighboring areas, a gap in your line art is usually the cause. Close the gap with a small brush stroke, or tighten the threshold by sliding back toward the start. If you're selecting from line art on one layer but painting on another, use a Reference Layer (below).
Method 3: ColorDrop and Continue Filling
ColorDrop is Procreate's paint bucket, with a twist:
- Drag the Colors icon from the top right onto the area you want to fill. Keep your finger or Apple Pencil held down.
- Without lifting, drag left or right to adjust the Threshold. Left fills less, right fills more. The percentage shows at the top of the screen.
- Lift to commit.
After a drop, tap Continue Filling to fill other areas with single taps. Tap and hold to adjust the threshold again, and tap the tick (or switch to another tool) to exit. On iPads that support Apple Pencil hover, you can hover over the active color and double-tap the Pencil to jump straight into Continue Filling.
ColorDrop is fast, but it follows what's on the layer, so it's only as precise as your line art. If edges look rough or tinted with a halo of unfilled pixels, raise the threshold slightly or fall back to Automatic Selection, where you can see the boundary first.
Recolor as an alternative
Procreate also brought back an older Recolor mode. It lives in the QuickMenu, which is off by default. Enable it under Actions → Prefs → Gesture Controls → QuickMenu, assign Recolor to one of the radial options, then tap areas to fill them. A Flood slider controls how aggressively the fill spreads. It's worth trying if you prefer tap-to-fill over dragging a color.
Method 4: Constrain painting instead of filling
Sometimes you don't want a flat fill. You want to shade, texture, or splatter inside a shape without crossing its edges. These techniques confine any brush, not just a fill.
Alpha Lock
Alpha Lock restricts painting to pixels that already exist on the layer. Choose Alpha Lock from the layer's menu, and your brush only affects the painted areas. It's quick, but the color is tied to that layer, so you can't easily separate the shading from the base shape afterward.
Clipping Mask
Add a new layer above your shape, tap it, and choose Clipping Mask. Anything you paint on the new layer only appears where the layer below has content. This is usually the better choice for production work for three reasons:
- The shading lives on its own layer, so you can recolor, adjust opacity, or delete it.
- If you change the shape underneath, the clipped layers follow automatically.
- You don't have to redo selections every time something changes.
Select the layer, then paint on another
Tap a layer and choose Select to turn its contents into a selection. Switch to a new layer above, and your brush is confined to that shape. This gives you a similar result to a clipping mask but is a one-time boundary rather than a live link. It's useful when you want a separate layer that isn't tethered to the shape below.
Reference Layer
If your line art is on one layer and your colors are on another, Automatic Selection and ColorDrop would normally read the layer you're on, which is blank. Set the line art layer as a Reference Layer and Procreate samples boundaries from it while you fill on the layer you're working on. This is the standard setup for coloring under line art without touching the lines.
Method 5: Fill Layer
If you want an entire layer to be one color, open Layers, tap the layer twice, and choose Fill Layer from the options menu after picking your color. It floods the whole layer, which is useful for backgrounds, flat color mattes, or base layers you'll mask later.
Choosing the right method
Troubleshooting common problems
Fill leaks outside the shape. There's a gap in the line art, or the threshold is too high. Close the gap or lower the threshold.
Color Fill does nothing. You may have a layer group selected. Select a single layer. Also check that Color Fill is highlighted blue.
Edges look jagged or have a light fringe. Anti-aliased pixels at the boundary are partly transparent, and a low threshold can leave them unfilled. Raise the threshold slightly, or fill on a separate layer beneath the line art so the lines cover the edge.
Fills keep appearing unexpectedly. Color Fill is still toggled on in Selections. Turn it off.
You can't paint where you expect. An old selection is still active. Tap the Selection tool and clear it.
Getting Procreate artwork into a motion pipeline
Many motion designers use Procreate for boardframes, hand-painted textures, mattes, and stylized elements, then move them into After Effects, Cinema 4D, or Nuke. A few habits make that handoff easier:
- Keep fills on separate layers. Clipping masks and individual color layers let you export a layered file and re-composite, recolor, or animate pieces independently.
- Fill on transparent layers. A selection-based fill on a blank layer gives you clean alpha without a background to key out.
- Use Feather deliberately. If a soft edge will be blurred or tracked in compositing, bake in only what you'll need. Excess softness is harder to remove than to add.
- Name your layers. It saves time when the file arrives in a compositor.
Quick workflow summary
For most situations, this sequence works well:
- Put line art on its own layer and set it as a Reference Layer.
- Create a new layer beneath for flat color.
- Use Automatic Selection with Color Fill, or ColorDrop, to fill each region.
- Add shading on clipped layers above each color.
- Export layers or flattened PNGs for compositing.
Learning which tool confines a fill, which confines a brush, and which keeps things editable is the difference between fighting Procreate and having it behave predictably. Start with Selections and Color Fill for precise single fills, add Clipping Masks for shading, and keep ColorDrop for speed.