How to Fill an Ink Drawing with White Procreate
StyleFrame Team8 min read
To fill an ink drawing with white in Procreate, put a new layer beneath your linework, set the line layer as a Reference layer, and drag white from the Colors icon into each enclosed area (ColorDrop). Hold the drag and slide right to raise the threshold until the fill reaches the edge of the lines without leaving a halo. For a quick solid white shape instead, select the outside of the drawing with Automatic Selection, invert it, and fill a layer below with Selections → Color Fill or Layer Options → Fill Layer.
What "Fill an Ink Drawing with White" Usually Means
The phrase covers three different jobs, and each one calls for a different method:
- White inside closed shapes. You want opaque white behind inked lines, like a cel-style base layer that blocks whatever sits underneath. Use Reference plus ColorDrop.
- A single white silhouette. You want the whole drawing as one solid white shape, as a matte, a sticker base, or a knockout. Use a selection fill or Alpha Lock.
- White lines. You want the ink itself turned white. Use Alpha Lock on the line layer and fill it.
Know which one you need before you start, because the layer structure you build now determines how easy the file is to animate or composite later.
Prep: Set Up Layers Before Filling
A clean layer stack saves time more than any fill trick does.
- Keep the ink on its own layer. Don't draw lines and fills together. If your ink is on a scan or photo, isolate it first so the lines are on a transparent layer, not on white paper.
- Hide or recolor the background. White fills disappear against a white canvas. Switch the background color layer off, or temporarily use a dark color, so you can see what you're doing.
- Create a new empty layer beneath the ink. All fills go here, so you can edit, recolor, or delete them without touching the linework.
- Name your layers. "Ink," "White Fill," and "Matte" are enough. Names matter when you hand the PSD to someone else, or to yourself in three weeks.
Method 1: Reference Layer and ColorDrop (Best for Closed Shapes)
This is the cleanest approach for most inked art, and it keeps the ink untouched.
- Tap Layers, then tap your ink layer and choose Reference. This tells Procreate to read the lines on that layer when you fill, regardless of which layer is active.
- Select the empty layer below the ink to make it active.
- Tap the Colors icon and choose white.
- Drag the Colors icon from the top right into the area you want to fill, and keep your pencil or finger down.
- While still holding, drag left or right to change the ColorDrop threshold. Left fills less and right fills more. The percentage appears at the top of the interface.
- Lift to commit the fill.
- Tap Continue Filling to tap other regions without dragging the color each time. Tap the tick or switch tools to exit.
Because the fill sits on a separate layer, you can later lock it, recolor it, or swap white for a flat color with Alpha Lock and Fill Layer.
Setting the Threshold
A low threshold fills only the pixels closest in value to where you dropped the color. On crisp, anti-aliased ink, that can leave a thin unfilled ring between the white and the line. Raise the threshold slightly until the white tucks under the edge of the line. Don't push it so far that the fill leaks through a weak spot in a line into a neighboring region.
Method 2: Selections with Color Fill
If you prefer working with selections, or you want one action to cover many regions, Color Fill is faster.
- Tap Selections and choose Automatic.
- Turn on Color Fill so it's highlighted blue.
- Set your color to white.
- Make sure the layer you want to fill into is active. Color Fill works on a single layer, not a group.
- Tap inside a closed shape. It fills as soon as the selection completes.
The Color Fill setting persists after you leave Selections, so switch it off when you're finished. Otherwise your next selection will fill unexpectedly.
If the Automatic Selection only grabs part of a shape, it usually means the lines are separated by small gaps or the selection threshold is too low. Drag to adjust the threshold, or close the gap on the ink layer.
Method 3: One Solid White Silhouette
For a unified white shape behind the whole drawing, such as a matte for compositing or a sticker base, there are two common routes.
Selection-Based Silhouette
- Make the ink layer active and use Automatic selection.
- Tap the empty space outside the drawing, then tap Invert to select everything inside the outer contour.
- Add a new layer beneath the ink, set white as the color, and use Fill Layer or Color Fill.
This only works when the outer contour is closed. A single break in the outline means the selection spills into the interior and doesn't isolate the shape. Close the break with a small stroke on a separate layer.
Duplicate, Alpha Lock, and Expand
This is the workaround for adding a white margin around the art:
- Duplicate the ink layer.
- Turn on Alpha Lock and use Fill Layer with white. The duplicate becomes pure white linework.
- Apply a Gaussian Blur from Adjustments, in the range of 10–12 or whatever suits your canvas resolution.
- Use Automatic selection on the blurred layer, then tap and hold to expand or contract the selection.
- Fill the selection on a new layer under the ink.
Procreate has no true offset command, so blurring and re-selecting is a common workaround for building an expanded white border. Expect slightly soft corners, so clean up sharp points by hand if the shape needs them.
Method 4: Turning the Lines Themselves White
To recolor the ink:
- Tap the ink layer and turn on Alpha Lock.
- Choose white, tap the layer again, and select Fill Layer.
Every opaque pixel becomes white, while the transparency, and so the line shape and anti-aliasing, is preserved. Use a dark temporary background to check the result.
Fixing Common Problems
- White leaks into the wrong areas. There's a gap in the ink. Close it on a separate layer, or lower the ColorDrop threshold.
- A thin dark or colored halo shows around the white. The fill isn't reaching the line edge. Raise the threshold, or run a small expansion on the selection before filling.
- Only part of the shape fills. Interior details such as small hatching or loose lines create tiny enclosed regions. Fill on the layer below with a higher threshold, or fill the silhouette first and treat the interior separately.
- The fill is invisible. Check that your background isn't white and that the fill layer isn't hidden, set to a blend mode, or lowered in opacity.
- Color Fill refuses to work. It only works on a single layer, not a group. Select a single layer.
- The ink is on white paper rather than transparent. Use Automatic selection on the white, delete it, or set the layer to Multiply so the white doesn't block anything beneath.
Exporting for Compositing
If the white fill is headed to motion work, how you export matters as much as how you fill.
- Export as PSD to preserve ink, fill, and matte as separate layers, so you can animate fills and lines independently.
- Export PNG with the background layer hidden if you need a single flattened image with transparency.
- Keep fills slightly larger than the ink. In compositing, a tiny overlap prevents edge flicker when layers are transformed or scaled.
- Treat the white fill as a matte. In your compositing tool, you can use the fill layer as a matte or alpha reference. This is more flexible than baking the white into the line art.
Where Styleframe Fits in an Ink-and-Fill Workflow
Procreate handles the drawing and the flat fills. The harder question for animators is what happens when you need those inked frames to move or take on a different look. Styleframe (styleframe.ai) is an AI video and motion tool that can sit beside your Procreate files as one option for that step. Your compositing pipeline stays the same. Your Procreate fills continue to serve as mattes and base layers, and Styleframe adds another source of motion and style.
Quick Reference
Keep fills on their own layers, close your gaps before filling, and export as a layered PSD. That way the white fill stays an editable asset instead of a baked-in decision when the file reaches your timeline.