How to Fill a Shape in Procreate Pocket
StyleFrame Team8 min read
To fill a shape in Procreate Pocket, pick a color, drag the active color swatch onto the closed shape, and release. This is ColorDrop, and it floods the area until it reaches a boundary like an outline or a different color. If the color spills past the edge or covers the whole layer, keep your finger down after dropping and slide left to lower the ColorDrop Threshold. For fills that must stay inside a shape, use Alpha Lock, a Clipping Mask, or a Selection.
Fill a shape with ColorDrop
ColorDrop is the primary fill method in Procreate Pocket and the fastest for flat color on line art or vector-style shapes.
- Choose your color. Open the Colors panel and pick a color from the Disc, Classic, Harmony, Value, or Palettes tab. Value mode is useful when you need an exact hex match to a brand or design-system color you'll use later in After Effects.
- Drag the active color onto the canvas. Place your finger on the active color swatch and drag it into the shape you want to fill. Don't lift yet.
- Hold and adjust the Threshold. While the color floods in, a Threshold percentage appears at the top of the canvas. Slide left to fill less, or right to fill more.
- Release to commit. Lifting your finger applies the fill. Procreate remembers the Threshold until you change it, so later drops start from the same value.
ColorDrop reads the pixels on the layer you're working on, so your outline needs to be closed. A gap of even a few pixels lets the color leak into the neighboring area.
Keep filling with other colors
After a ColorDrop, Procreate offers a Continue Filling option, which lets you tap other areas to fill them with the same color. It's useful for blocking in flats across a character or a set of icons. Exit by tapping the checkmark or switching to another tool such as the Paint brush.
Fix a fill that covers the whole canvas
This is the most common complaint from new users. Two causes account for most cases.
The Threshold is too high. A high Threshold tells Procreate to treat nearly everything as one region, so the fill escapes the shape. Drop the color again, hold, and slide left until the fill hugs the edge. Check this first.
You're filling an empty layer. If the shape is on one layer and you're dropping color on a new blank layer above it, Procreate sees nothing but transparent pixels and fills the entire layer. You have two options:
- Drop the color on the same layer as the shape.
- Set the shape layer as a Reference layer (tap the layer to open Layer Options, then choose Reference). Now ColorDrop on a separate layer uses the shape layer's edges to decide where to fill. This is the better habit for production work because the color stays separate from the line art.
White specks and fringing along edges
If small unfilled halos remain around the outline, the line art likely has soft or semi-transparent edges, which is common with textured brushes. Raise the Threshold a little, or use a more solid brush for the outline. If the fill is clean but you see a thin light line when you later composite, expand the fill slightly by raising the Threshold before you commit.
Fill with Selections and Color Fill
When the shape has no clean outline, or you want a precise geometric form, use a Selection instead.
- Tap the Selection tool.
- Choose a mode: Automatic, Freehand, Rectangle, or Ellipse.
- Enable Color Fill so the current color fills as soon as the selection closes.
- Draw or tap your selection.
Rectangle and Ellipse selections are the quickest way to make perfect geometric shapes, and Feather can soften the edges. Color Fill stays on between sessions, so turn it off when you're done or you'll fill things by accident later. Color Fill also works only on a single layer, not on a group, so select an individual layer first.
Fill an entire layer
If the whole layer should be one color, such as a background plate, open Layer Options for that layer and use Fill Layer. It applies the current color to every pixel on that layer. Use it on a dedicated layer rather than on your artwork, since it overwrites what's there.
Keep the fill inside the shape: Alpha Lock and Clipping Masks
For anything you'll revise, it's better to avoid filling destructively at all. Two layer features keep color inside a shape without relying on thresholds.
Alpha Lock
Alpha Lock restricts painting to pixels that already exist on the layer. Turn it on for the shape layer from Layer Options, then paint, drop color, or apply a gradient. Anything you do affects only the existing shape and never the transparent area around it. It's the quickest way to recolor a shape you've already drawn.
Clipping Mask
A Clipping Mask is the non-destructive route. Draw your shape on a base layer, add a new layer above it, and choose Clipping Mask in that new layer's options. Whatever you paint on the upper layer appears only where the base layer has pixels. This gives you several advantages:
- You can paint shading, texture, or highlights without touching the base shape.
- You can change the base color at any time.
- You can stack multiple clipped layers, each with its own blend mode.
Fill a shape with a gradient, pattern, or image
Solid color is only one option. The same layer logic handles richer fills.
- Gradient: Turn on Alpha Lock for the shape layer and create a gradient on it. Alternatively, fill the shape with black, put a gradient on a layer above it, and set that layer's blend mode to Lighten. The lighter value wins at each pixel, so the gradient shows through where the shape is dark.
- Pattern or texture: Place the pattern on a new layer above the shape and apply a Clipping Mask.
- Photo or image: Import the picture, which lands on its own layer, then clip it to the shape layer. Some users report that a clipping mask occasionally fails with certain fonts or text layers. If that happens, try redrawing the base and clipping again.
Set up your layers for a motion workflow
If the artwork is headed to After Effects, Nuke, or Blender, a few habits in Procreate save time later.
- Separate fills from line art. Keep color on its own layer using Reference-based ColorDrop, so you can swap or animate each independently.
- Name your layers. Procreate's default names make for a messy PSD import. Rename before you export.
- Avoid unnecessary flattening. A clipped, layered file gives you maximum flexibility when you rebuild the shapes as shape layers, textured mattes, or cutouts in your compositing app.
- Export a transparent PNG or a layered PSD. Transparent PNGs work for single elements, and a layered PSD keeps your fills, shadows, and highlights separate for animating.
- Be mindful of resolution. Set your canvas size at the start, since scaling raster fills up in After Effects can soften edges.
Procreate fills are raster, so crisp, vector-like edges depend on canvas size and Threshold settings. If you need infinitely scalable shapes, redraw them as vector shapes in After Effects or Illustrator and use your Procreate art as the reference.
Where Styleframe fits after your shapes are filled
Once your shapes are filled and the artwork looks right, the next question is often how to bring it to life. Styleframe is an AI video and motion tool built for professional artistic control, and it works from what you give it rather than from a prompt alone. Everything is driven by reference images, video clips, and keyframes, so your filled shapes can serve as the visual anchor.
Your compositing stays where it is, and Styleframe handles the generative stage upstream.
Quick troubleshooting checklist
- Fill covers the whole layer: lower the Threshold, or set the shape layer as Reference if you're filling on a different layer.
- Color leaks outside the outline: close gaps in the line art, then lower the Threshold.
- Halos or white specks: raise the Threshold slightly or use a more solid outline brush.
- Fill only changes the outline: you're probably using Alpha Lock on the line layer. Fill on the layer containing the filled area, or switch to a Clipping Mask.
- Selection Color Fill does nothing on a group: select an individual layer.
- Unexpected fills while selecting: Color Fill is still on in the Selection tool. Turn it off.
Frequently asked questions
What's the fastest way to fill a shape in Procreate Pocket? Drag the active color onto a closed shape and release. Adjust the Threshold by sliding left or right before you lift.
How do I fill without filling the entire canvas? Lower the ColorDrop Threshold, and make sure you're dropping the color on the same layer as the shape or that the shape layer is set as Reference.
How do I recolor a shape I've already filled? Turn on Alpha Lock for that layer and fill it again, or use a Clipping Mask to paint over it without altering the original.
Can I fill a shape with an image? Yes. Import the image and clip it to the shape layer with a Clipping Mask.
Master ColorDrop and the Threshold first, then lean on Reference, Alpha Lock, and Clipping Masks for anything you expect to revise. That combination keeps your fills clean and your layers organized, which pays off when the artwork moves into an animation or compositing pipeline.