How to Fill a Drawing with Color in Procreate
StyleFrame Team8 min read
The fastest way to fill a drawing with color in Procreate is ColorDrop. Pick a color, drag the color circle from the top right into a closed shape, and keep your Apple Pencil or finger on the screen to adjust the fill threshold before you lift. If your line art sits on its own layer, set that layer as a Reference layer and fill on a new layer underneath. If ColorDrop doesn't suit the job, Selections → Color Fill, Fill Layer, and Recolor are the other built-in options.
Prepare the Drawing Before You Fill
Most fill problems come from the drawing, not the tool. Two habits prevent nearly all of them.
Close your shapes. ColorDrop floods outward until it hits a boundary. If a line has even a small gap, the color escapes and fills far more than you intended, sometimes the entire layer. Zoom in on corners and line joins before filling, and patch any gaps with a small brush stroke.
Keep line art on its own layer. Put outlines on one layer and color on layers beneath. You can then change colors, fix mistakes, and hand off clean elements without ever touching the linework. For motion work this matters even more, because separate flat-color layers are much easier to animate, rig, or composite later.
Method 1: ColorDrop
ColorDrop is Procreate's main fill tool, and it behaves like a paint bucket you drag into place.
- Choose your color by tapping the color circle at the top right.
- Drag that circle onto the closed area you want to fill. Don't lift yet.
- Keep holding. A Threshold percentage and a blue bar appear at the top of the canvas.
- Slide left to fill less or right to fill more.
- Lift your Pencil or finger to commit the fill.
Procreate remembers your last threshold, so a fill that behaves oddly may just be using a leftover setting. If a ColorDrop floods the whole layer even though your shape is closed, the threshold is the first thing to check.
Continue Filling
After a ColorDrop, a Continue Filling option appears at the top of the screen. Tap it and you can fill other areas with single taps in the same color, or tap and drag to adjust the threshold on the fly. Tap the checkmark or switch to another tool such as the brush to exit.
This is the quickest route for flat-coloring a character with many small regions, such as a design sheet or a set of shapes you plan to animate separately. Change color, then tap through the remaining areas.
Method 2: Fill Beneath Line Art with a Reference Layer
The common beginner mistake is dropping color onto the line art layer itself. ColorDrop then reads only that layer, and it may fill the wrong thing or paint over your lines. The cleaner workflow uses two layers:
- Open the Layers panel and tap your line art layer.
- Choose Reference from the layer options. The layer is now the source Procreate reads for fill boundaries.
- Create a new layer below the line art and select it.
- Drag your color into the closed shapes. The fill lands on the empty layer but respects the outlines on the reference layer.
If a fill covers the whole canvas on a new layer, the likely cause is a missing reference. An empty layer has no edges to stop the flood, so it fills everything.
This method keeps your color and line work independent. You can swap colors, add shading layers, or hide the outlines entirely without any cleanup.
Method 3: Selections → Color Fill
When a shape is hard to close or you want geometric precision, build a selection and fill it directly.
- Tap the Selection tool at the top.
- Choose a mode from the bottom tabs: Automatic, Freehand, Rectangle, or Ellipse.
- Make sure Color Fill is highlighted (blue).
- Pick your color.
- Make the selection. The color fills the area the moment you finish.
Color Fill stays on between sessions, so turn it off when you're done or every selection will fill unexpectedly. It also works on a single layer only, not a group, so flatten or select a specific layer first. Combine it with Feather for soft-edged fills, such as vignettes or glow shapes.
Method 4: Fill Layer
If you want an entire layer filled with one color, for example a solid background, use Fill Layer:
- Select your color.
- Open the Layers panel and tap the layer twice to open its options.
- Choose Fill Layer.
The whole layer takes the current color. Use it for backgrounds, color plates, or base layers you plan to mask or clip other work onto. If you might want the original back, duplicate the layer first.
Method 5: Recolor
Recolor is an older tap-to-fill tool and an alternative to ColorDrop. It's hidden by default and accessed through QuickMenu. To set it up, go to Actions → Prefs → Gesture Controls → QuickMenu and choose how you want to invoke it. Assign Recolor to one of the radial slots, then:
- Enter Recolor from QuickMenu.
- Select your color.
- Tap the areas to fill.
- Use the Flood slider to control how aggressively the fill spreads.
Some artists prefer Recolor's tap-based flow. Which one wins is largely personal preference.
Recoloring Later: Alpha Lock and Clipping Masks
Once your base colors are down, you'll probably want to change or shade them without disturbing the edges. Two features help:
- Alpha Lock restricts painting to pixels that already exist on the layer. Turn it on, then paint or fill, and color stays inside the original shape. It's quick, but it changes the layer's pixels directly.
- Clipping masks place a new layer above a base layer and confine its contents to the base layer's shape. Your base stays untouched, so shading, texture, and color variations remain non-destructive. For production work this is usually the better habit.
Troubleshooting Common Fill Problems
The fill covers the whole canvas. Check for gaps in your outline first. Then check your threshold, since a very high value can leak through weak edges. Finally, confirm you've set the line art as a Reference layer if you're filling on a different layer.
White spots or untouched edges remain. This happens most often with textured or semi-transparent brushes, because the lines have tiny gaps and soft edges. Raise the threshold gradually while still holding, in small increments, until the gaps fill. For a cleaner result, redraw the outline with a solid, opaque brush such as a monoline or a hard inking brush.
A halo or fringe shows around the fill. A light rim can appear between fill and line. Raising the threshold a bit may help. With a reference setup, you can also simply let the fill extend slightly beneath the outlines, since the line layer sits on top.
Textured lines never quite match the fill. A solid fill next to a grainy line will always look slightly different. If you want a unified texture, apply grain on a separate layer above both, or choose cleaner line work and add texture afterward.
The tool seems to ignore your layer. Fills respect the active layer and any Reference layer. If results look wrong, confirm which layer is selected and whether a Reference tag is on the wrong one.
Getting Procreate Color Work Into a Motion Pipeline
For animators, motion designers, and VFX artists, a filled Procreate drawing is often a starting point. A few habits make the handoff smoother:
- Keep elements on separate layers. Characters, props, backgrounds, and effects each deserve their own layers or groups so they can be animated independently.
- Name your layers. Clear names save real time once you're inside After Effects, Blender, or Nuke.
- Export in a layered or transparent format. A layered PSD, or PNGs with transparency, preserves your flat colors and clean alpha edges for compositing.
- Work at the final resolution. Choose your canvas size when you create the document, and start at or above your delivery size to avoid upscaling softness later.
Where Styleframe Fits After the Fill
Procreate is a strong place to design the frames. Extending those frames into motion is a different job, and that's where Styleframe can help. It's an AI video and motion tool built around artistic control rather than one-click output, so every generation is driven by your own reference images, video clips, and keyframes.
A practical flow looks like this: finish your filled key drawings in Procreate, then bring them into Styleframe as keyframes. With Frames-to-Video, you define the start and end poses and let the tool generate the motion between them. With Restyle or Ink-and-Paint, you use a reference image to carry your look, such as your flat colors and line quality, across footage or generated clips. Other tools handle specific tasks: Remove Background isolates elements, 2D-to-3D and Turntable explore a design from other angles, and 4K Upscale prepares output for delivery.
Iteration is non-destructive, so you can try variations without losing earlier versions. The result is production-ready 4K, and Styleframe exports image sequences that drop straight into your existing compositing setup. It works alongside After Effects and Nuke rather than replacing them. Your pipeline stays intact. Procreate handles the drawing, Styleframe extends it into motion, and your compositor handles the final polish.
Quick Reference
Master ColorDrop with a Reference layer, learn to read the threshold, and keep your layers organized. Those three habits solve most coloring problems in Procreate, and they leave you with clean, separated artwork ready for whatever motion pipeline comes next.