How to Figure Dpi Procreate
StyleFrame Team7 min read
To figure out DPI in Procreate, use one formula: canvas size in inches × DPI = canvas size in pixels. Fix any two values and the third follows. To see what your canvas currently uses, open Actions → Canvas → Canvas information → Dimensions, which lists DPI, physical size, and pixel size. DPI only matters if the artwork will be printed. For video, motion, or screen delivery, the pixel dimensions are the number that counts.
What DPI Means in Procreate
DPI stands for dots per inch. In Procreate, the figure is technically pixels per inch (PPI). The two terms are different in strict printing terms, but they're used interchangeably in most art apps, and Procreate's DPI field is a pixel density value.
The important point is that DPI is a relationship, not a quality setting. A canvas is always a fixed grid of pixels. DPI describes how tightly those pixels are packed when the grid is mapped to a physical size. A 3000 × 3000 px canvas has the same pixel content whether it's tagged 72 DPI or 300 DPI. Only the implied print size changes.
That's why several people in Procreate's community forums describe DPI as a "relative number." Change it freely and the pixels don't move. The exception is when you set a canvas in physical units like inches or millimeters, because then DPI determines how many pixels get created.
The Core Formulas
Everything you need comes from rearranging one equation.
- Pixels needed: inches × DPI = pixels
- Print size you can reach: pixels ÷ DPI = inches
- Effective DPI of existing art: pixel width ÷ print width in inches = DPI
Worked examples
- 11 × 14 in at 300 DPI: 11 × 300 = 3300 px wide, 14 × 300 = 4200 px tall.
- Same size at 600 DPI: 6600 × 8400 px. Doubling DPI doubles each dimension and quadruples the total pixel count, roughly 14 megapixels to over 55.
- 7 × 10 in book cover at 300 DPI: 2100 × 3000 px.
- A4 at 300 DPI: roughly 2480 × 3508 px.
- A 3840 px wide canvas: at 300 DPI it prints about 12.8 in wide. At 125 DPI it reaches about 30.7 in.
If you're checking existing work, go to Actions → Canvas → Canvas information → Dimensions and read the pixel width. Divide by your intended print width and you have the effective DPI.
Choosing the Right DPI for the Output
There's no single correct number. The right DPI depends on print size, viewing distance, and material.
A few practical guidelines:
- 300 DPI is the standard for good print quality at close viewing distance.
- Don't go much below 125 DPI unless the piece will be seen from far away. That's a reasonable floor for acceptable quality at typical sizes.
- Err on the high side. It's easier to scale down a large canvas than to enlarge a small one without visible softness.
- Ask the printer. A professional print shop will tell you the exact pixel dimensions and format they want.
How to Set DPI When Creating a Canvas
Set DPI before you start painting if there's any chance of print output.
- In the Procreate Gallery, tap the + button.
- Tap the New Canvas (custom size) button.
- Choose your unit, such as pixels, inches, or millimeters.
- Enter width and height.
- Set DPI.
- Check the resulting pixel dimensions, then create the canvas.
The preset canvases use DPI values ranging from 132 to 400, so the default isn't necessarily 300. If a client needs print-ready files, don't assume the preset is right. Verify it.
Why higher DPI costs you layers
Procreate limits the number of layers according to canvas size. As you raise DPI (and therefore pixel count), the maximum layer count can drop. In one tutorial walkthrough, resampling a canvas up to 3000 px took the available layers from around 300 down to 52. If your process relies on many layers, check the layer limit before committing to a very high resolution.
How to Change DPI on an Existing Canvas
You can adjust DPI after the fact, but be deliberate about which behavior you want.
- Tap Actions → Canvas → Crop & Resize.
- Open Settings.
- Change DPI, size, or both.
There are two distinct outcomes:
- Without resampling: The pixel grid stays the same. Increasing DPI makes the physical width and height smaller, and decreasing DPI makes them larger. Nothing is added or removed. Only the implied print size changes.
- With Resample Canvas on: Changing size or DPI changes the pixel dimensions themselves. Enlarging this way upsamples the image and doesn't add real detail, and it will reduce your available layers.
Procreate's own guidance notes that making a large DPI change after work has begun can be difficult, and sometimes not possible, when you need a specific physical output. Decide early.
Working large, delivering at a fixed size
A common question is how to draw on a larger canvas but still print at a fixed size like 11 × 14. The answer is to keep the physical dimensions at 11 × 14 and raise the DPI. At 600 DPI you get a 6600 × 8400 px canvas that prints at exactly 11 × 14 and has headroom for larger prints later. To check detail at true size, add the Actual Size command to your QuickMenu so you can jump to 100% zoom.
Common DPI Mistakes
Confusing DPI with resolution
Changing a 1200 px canvas from 72 to 300 DPI doesn't make it sharper. It just shrinks the implied print size. Check pixel dimensions first.
Trusting the default
If Procreate shows a different DPI than you expected (for example 132 instead of 300), check Canvas information. Imported images can sometimes bring their own DPI into the equation. Setting up the canvas manually and testing import and export is a sensible way to isolate the problem.
Skipping a test print
If you're unsure whether your pixel count holds up, print test sizes, such as 4 × 6 in, then step up until the detail breaks down. That tells you more than any calculator.
Starting too small
Canvases that look fine on a tablet can fall apart at poster size. If the piece might be reproduced larger later, start with more pixels than you think you need.
What Motion and VFX Artists Should Actually Care About
If your Procreate artwork is going into an animation, title sequence, or composite, forget DPI as a quality lever. For screen delivery, what matters is the pixel dimensions.
- Set the canvas in pixels. Use your delivery or comp dimensions: 1920 × 1080, 3840 × 2160, or a custom size for vertical or square formats. If you need to crop or reposition in the comp, build in extra pixels around the frame.
- Ignore the DPI tag for video. For anything that isn't printed, judge the artwork by its pixel width and height rather than its DPI value.
- Plan scale moves ahead of time. If a camera push or zoom will magnify the artwork, the canvas needs enough pixels to hold up at the maximum scale. That's the same "work larger" principle as print, applied to a comp.
- Watch the layer limit. Painting layered elements for parallax at a very high resolution can run into Procreate's layer cap, so consider splitting the work into separate canvases or planning your layer count in advance.
- Export deliberately. Choose an export format that keeps what your comp needs, such as transparency or layers, and test the result before committing.
Where Styleframe fits
Procreate is a strong tool for drawing the key looks, such as hand-painted frames, textures, and style references. is an AI video and motion tool, and Procreate frames can serve as reference material for it. As with any generative step, check the output against your reference at full resolution before it goes into a final comp.
Quick Reference
- Check current DPI: Actions → Canvas → Canvas information → Dimensions
- Change DPI or resample: Actions → Canvas → Crop & Resize → Settings
- Pixels needed: inches × DPI
- Max print size: pixels ÷ DPI
- Standard print: 300 DPI; avoid dropping below about 125 unless viewed from far away
- Video or screen: set pixel dimensions and ignore DPI
- Higher resolution: more pixels, fewer available layers
If you remember only one thing, remember that DPI is just pixels per inch of output. Decide the output size first, calculate the pixels you need, and set up the canvas around that number.