How to Fade Out Sound in After Effects
StyleFrame Team8 min read
To fade out sound in After Effects, select the audio layer and press L to reveal Audio Levels. Set a keyframe at 0 dB where the fade should begin, then move forward and add a second keyframe at about −48 dB, which is effectively silent. Select both keyframes and press F9 for Easy Ease, then adjust the spacing between them to control how long the fade lasts.
The Quick Method: Keyframe Audio Levels
After Effects has no drag-handle fades or audio transition presets like Premiere Pro. Every fade is a keyframed change to the layer's Audio Levels property, measured in decibels.
- Select the layer. This can be a standalone audio file or a video layer with embedded audio.
- Press L once to show Audio Levels. Press L twice to show the waveform as well.
- Place the playhead where the fade should begin and click the stopwatch next to Audio Levels. This records a keyframe at the current value, usually 0 dB.
- Move the playhead to where the sound should be gone.
- Set the value to −48 dB. After Effects adds the second keyframe automatically.
- Select both keyframes and press F9 (Fn+F9 on some Mac keyboards).
- RAM Preview with the spacebar or numpad 0 and listen.
The stopwatch has to be active before you change any value. If you type a number first, After Effects applies it to the whole layer instead of recording a keyframe.
Step-by-Step Details That Matter
Revealing the Right Properties
Audio properties sit under the layer's Audio group in the Timeline panel. If nothing appears when you press L, check that the layer contains audio. Also check that the speaker icon in the Audio/Video column isn't toggled off. Showing the waveform helps you start the fade on a beat, a phrase ending, or a natural pause instead of guessing by ear.
Choosing the End Value
The Audio Levels slider can go as low as −192 dB, but you rarely need that. Many editors use −48 dB as the floor because it's inaudible in normal playback. Some prefer −100 dB for a mathematically cleaner exit, and either works. Pick one and keep it consistent across projects so your fades behave predictably.
If you only want the track quieter, not gone, set a single value such as −12 dB with no keyframes. That lowers the whole layer.
Setting the Duration
The distance between your two keyframes is the fade length. Rough starting points:
- Music outros: 2–4 seconds feels natural. Longer works for ambient or cinematic pieces.
- Dialogue or effects: 10–20 frames is usually enough.
- Hard cuts masked by a fade to black: match the fade length to the visual fade exactly.
Very short fades can be nearly undetectable. On a 24 fps comp, a 10-frame fade is only about 0.4 seconds, and that is often too brief for a listener to register as a fade rather than an abrupt stop.
Make the Fade Sound Smooth
A straight two-keyframe fade can sound mechanical, with a noticeable drop or a long tail of near-silence. Three adjustments fix most of it.
Apply Easy Ease
Pressing F9 on the keyframes softens how the fade starts and ends. You can also apply it to only one keyframe. For example, Easy Ease Out on the first keyframe gives a gentle departure from full volume while the end keeps its linear slope.
Shape the Curve in the Graph Editor
Toggle the Graph Editor from the Timeline panel, select the Audio Levels property, and drag the Bézier handles. A curve that drops slowly at first and then accelerates will often feel more natural than a straight line, especially on sustained music. Because the fade runs in decibels, a gentle ease is usually enough, so avoid extreme handle pulls.
To audition a fade, loop a section of dense or noisy audio. Flaws in the curve show up more clearly there than on a sparse piano note.
Save It as an Animation Preset
Once you have a fade you like, you can save it as an animation preset and reuse it. This saves time if you build many deliverables or social cutdowns.
Fade In and Fade Out on the Same Layer
Most finished pieces need both. Use four keyframes:
- At the layer start: −48 dB
- After your fade-in length: 0 dB
- Before your fade-out: 0 dB
- At the layer end: −48 dB
Apply Easy Ease to all four. To change timing later, drag the keyframes to where you want them.
Sync the Audio Fade With the Picture
Sound and picture fades should be designed together. If the image goes to black over 24 frames, start both fades on the same frame and let the audio run slightly longer or shorter depending on tone.
A few habits help:
- Use markers. Add composition or layer markers at the start and end of the visual fade, then snap audio keyframes to them.
- Check your layer out point. If the music is longer than the comp, trim it or the fade may land beyond the end of your work area.
Automate Fades With an Expression
For templates or batch work, an expression keeps the fade tied to the layer's out point instead of hand-placed keyframes. Alt/Option-click the Audio Levels stopwatch and paste:
Audio Levels is a two-value property, one per channel, which is why the expression adds [d, d]. When you trim the layer, the fade follows the new out point. Change fade to adjust the length. This approach adds the fade on top of any base level you've set, so a track sitting at −6 dB fades relative to that level.
An Alternative: The Stereo Mixer Effect
Stereo Mixer (Effect > Audio > Stereo Mixer) offers Left Level and Right Level controls plus panning. You can keyframe those levels for a fade, which is useful when you want to fade the channels independently or combine a fade with a pan. For a standard fade-out, the Audio Levels property is simpler and cleaner.
When Premiere Pro Is the Better Place for the Fade
After Effects is not an audio editor. If a project needs several audio edits, such as crossfades, ducking under dialogue, or cleaning up levels, it's often better to do that in Premiere Pro or a DAW and treat After Effects as the place for visuals. Premiere offers drag-handle fades and crossfade transitions on the timeline, and a dedicated audio tool gives you more mixing control.
A practical split many teams use:
- Build the final mix in Premiere or your audio application.
- Bring a mixed reference track into After Effects only for timing animation.
- Mute or remove that track on render if the final mix is delivered separately.
For a single motion piece, such as a logo sting, title sequence, or short social spot, a keyframed fade in After Effects is usually all you need.
Troubleshooting Common Problems
The fade doesn't seem to happen. Check that the stopwatch is on and that you have two keyframes with different values. Also confirm the fade is long enough to hear. A fade of 10 frames on a loud, dense track may sound like a cut.
The volume changes but sounds stepped or uneven. Make sure interpolation isn't set to Hold. Try adjusting the curve in the Graph Editor, and test with a steady tone or noise to see the real shape.
No audio in the export. Open the Output Module settings and confirm Audio Output is enabled, with a suitable format and sample rate. Audio also must not be muted on the layers, and the layers must be inside the render work area. Choose a format that carries audio, because an image-sequence render produces none.
The preview audio stutters. RAM Preview audio can be unreliable on heavy comps. Judge the fade after a render or a cached preview, not only in a live preview.
Compressed source audio causes problems. If you see odd behavior on render, convert MP3 sources to WAV before importing. Uncompressed audio tends to behave more consistently in After Effects.
Fade applied but still hear sound at the end. The end value may not be low enough, or a second audio layer is playing underneath. Solo each layer and check.
Where Styleframe Fits in a Fade-Out Workflow
Audio fades are timing decisions, so they work best when the picture they follow is already locked. That is where can help. It's an AI video and motion tool built for artistic control rather than one-click output. You can build the closing shot of a piece there, then bring it into After Effects. From there, you animate the Audio Levels fade against the final frames, using the same keyframes, markers, and Easy Ease described above. Styleframe doesn't replace this audio work. It supplies the visuals so your compositing and sound timing stay where they already live.
Frequently Asked Questions
What is the shortcut for audio levels in After Effects? Press L to reveal Audio Levels on the selected layer. Press L twice to show the waveform.
What dB value is silent in After Effects? −48 dB is inaudible in typical use. You can go lower, up to −192 dB, but it rarely makes a practical difference.
Can I fade audio without keyframes? Yes. The expression method above ties the fade to the layer's out point, so no hand-placed keyframes are needed.
Is there a built-in audio fade effect? No. After Effects has no audio transitions like Premiere Pro, so fades are keyframed on Audio Levels or built with an expression.
How long should a fade-out be? For music, 2–4 seconds is a good default. For effects and dialogue, shorter fades of 10–20 frames usually work, and the right length depends on the pacing of your piece.