How to Extract Lineart in Procreate
StyleFrame Team8 min read
To extract lineart in Procreate, import your scan or photo, then set the layer to the Multiply blend mode so the white paper disappears and only the dark lines show. If you need true transparency, for example to recolor lines with Alpha Lock or hand a clean PNG to After Effects, convert the grayscale image into a layer mask on a solid-color layer. For photos, you can build lineart from a duplicated, desaturated layer using an inverted copy, Color Dodge, and Gaussian Blur.
Pick the method that matches your source
"Extract" means different things depending on what you start with:
- Inked scan or photo of a drawing, and you only need to color underneath: Multiply is enough.
- Inked scan where you need real alpha: use the mask method below.
- A photo you want to turn into lines: use the Color Dodge or Divide technique.
Procreate has no one-tap "make white transparent" command. Every method here is a layer-mode or mask workaround, and knowing which one you need saves a lot of trial and error.
Method 1: Multiply for fast, non-destructive extraction
Multiply is the quickest route and often all you need for flat coloring.
- Import the scan or photo with Actions > Add > Insert a Photo, then fit it to the canvas.
- Tap the N on the layer thumbnail to open Layer Options and choose Multiply (in the Darken group).
- Add a new layer and drag it below the artwork layer.
- Paint on the lower layer. The lines sit on top, and the white paper no longer blocks your color.
Multiply works best when the paper is close to pure white and the lines are close to pure black. If the paper looks grayish, open Adjustments > Curves and drag the white point inward until the paper clips to white. Pull the black point the other way until the lines are dense. Do this before you rely on the blend mode, because anything slightly off-white will tint your colors.
The limitation: the layer still contains opaque white pixels, and Multiply only hides them visually. You can't Alpha Lock and recolor the lines, and exporting the layer on its own gives you a white background. For those cases, move to the next method.
Method 2: Make real transparent lineart with a mask
This approach converts brightness into opacity. Procreate masks follow a simple rule: white reveals, black hides. If you turn your lines white and your paper black, the mask shows the lines and hides everything else.
- Desaturate. Duplicate your scan layer, then go to Adjustments > Hue, Saturation, Brightness and set Saturation to 0.
- Clean up contrast. Use Curves to push the paper to pure white and the lines to dark. Clean tonal separation here directly determines how clean your edges are later.
- Invert. Flip the image so the lines are light and the paper is dark. You can use the layer's Invert option or flip the Curves diagonal. Your canvas should now look like a chalk drawing on black.
- Copy it. Select the layer's contents and copy them to the clipboard.
- Create the line layer. Add a new layer and fill it with the color you want for the lines, usually black. Tap the layer and choose Mask.
- Paste into the mask. Select the mask thumbnail and paste. Your lines should now appear in the fill color, with a transparent background.
- Flatten the mask. Tap the layer and choose the option that applies the mask, so you end up with ordinary pixels with real alpha.
Hide the original scan layers and check the result against a checkerboard or a contrasting color layer. You should see lines with soft, anti-aliased edges and nothing behind them. Because the result has genuine transparency, Alpha Lock works.
Recoloring the lines
A common reason for extracting lineart is recoloring it to blend with the painting: warmer lines in highlights, darker lines in shadow. Once the lineart has true alpha:
- Turn on Alpha Lock for the line layer.
- Pick colors from your color layers and paint over the lines. Only the line pixels change.
- Use a soft brush at low opacity where you want a gradual transition, such as fading the line out toward a highlight.
If you stay on the Multiply-only version, you can't do this cleanly, which is why the mask method is worth the extra steps.
Method 3: Extract lineart from a photo
If your source is a photo or a painted reference rather than ink, the lines don't exist yet, so you generate them. The classic Procreate approach uses a color-dodge effect:
- Insert the photo and duplicate the layer.
- Desaturate the duplicate (Adjustments > Hue, Saturation, Brightness, Saturation 0).
- Duplicate that grayscale layer, then invert the copy with Curves by dragging the top point down and the bottom point up.
- Set the inverted layer's blend mode to Color Dodge (in the Lighten group). The canvas will turn mostly white.
- Apply Gaussian Blur to the inverted layer. As the blur increases, edges emerge as line drawing.
A second option uses Divide instead of an inverted copy. Duplicate the desaturated layer, set the top copy to Divide, and blur it. Merge the two layers, then use Curves to increase contrast so the lines go dark and the background goes white. Either way, the blur amount controls line weight and detail. Low blur gives fine, noisy detail, while higher blur gives bolder, simpler lines.
The result is a flattened black-and-white image on white. To get transparency from it, run it through Method 2 or set it to Multiply.
If the effect isn't working (one reported complaint is getting a high-contrast black-and-white photo with no lines), check these:
- The blend mode is applied to the inverted layer, not the base.
- The blur is actually applied. With no blur, the two layers cancel and you see no edges.
- You are using Color Dodge, not a similarly named mode. A yellowish result can mean color information remains, so make sure you desaturated first.
Cleaning up before you commit
Extraction exposes every flaw in a scan, so do some prep:
- Paper grain and shadows: Curves will remove most of it. For stubborn shadows from phone photos, use a large soft eraser on a copy of the layer rather than the original.
- Line density: if pencil or light ink drops out after thresholding, pull the black point in Curves slightly instead of crushing the whole image.
- Resolution: scan at a high resolution so you can scale down later without softening the lines. Upscaling thin lines almost always looks worse than starting large.
- Keep the original: hide it, don't delete it. You may want to re-extract with different settings.
Exporting lineart for After Effects and other tools
Procreate keeps your work editable, but compositing apps need the right file type.
- Single frames: export as PNG with the background color layer hidden, so the transparency is preserved.
- Layered work: export a layered file and verify the look after import, since blend modes may not match Procreate exactly.
- Animation: if you draw frames in Procreate, export each frame as a transparent PNG with consistent naming and import them into your compositing app as an image sequence.
Whichever format you choose, check the edges against a dark and a light background once it's in the compositing app. Residual white fringing means the extraction left semi-opaque pixels, and that's usually a sign you should return to Curves before the mask step.
Where Styleframe fits after the lineart is extracted
Procreate handles the extraction. What comes next, especially for motion work, is where a tool like can help. It is an AI video and motion tool, and you can bring your clean lineart and colored frames into it as source material.
Styleframe doesn't replace your Procreate cleanup. It sits downstream of it, so you keep your compositing workflow and bring results back into the timeline as you would any other plate.
Troubleshooting common problems
White still shows when I export. The layer is probably on Multiply but not truly transparent. Rebuild it with the mask method, and hide any background color layer before exporting.
Lines look thin or broken after masking. Your Curves adjustment was too aggressive. Redo the contrast step with a gentler black point.
Alpha Lock recolors the whole layer, not just the lines. The white background pixels are still opaque, so the mask wasn't applied or flattened.
Edges look jagged. Work at a higher canvas resolution, and avoid hard thresholding. Soft tonal transitions in the grayscale step become smooth anti-aliasing in the final alpha.
Colors look muddy under Multiply. The paper isn't pure white. Re-level it, or switch to the mask method so the paper no longer influences color.
Summary
Use Multiply when you only need to paint underneath. Use the inverted-grayscale mask when you need real alpha, recoloring, or a clean PNG for compositing. Use the Color Dodge or Divide technique when your source is a photo. Level your scan first, keep the original hidden rather than deleted, and check your edges in the compositing app before you build on top of them.