How to Export Procreate to Illustrator
StyleFrame Team8 min read
Procreate can't export native vector files, so you move artwork into Illustrator as a raster (PNG, layered PSD, or PDF) and convert it with Image Trace. Export at the highest practical resolution, place the file in Illustrator, trace it, expand the result into editable paths, and clean up the anchor points. Simple line art and flat, high-contrast color traces well. Textured brushes, gradients, and soft shading will lose detail or need manual redrawing with the Pen tool.
Why Procreate Can't Export Vectors
Procreate is a pixel-based painting app. Every stroke, layer, and piece of text lives as pixels at the canvas resolution you set when you created the document. Illustrator works with mathematical paths that scale without quality loss. There is no "Export as AI" or "Export as SVG" in Procreate, so every workflow is really a conversion: you translate pixels into paths and accept some interpretation along the way.
How faithful that translation is depends on the artwork. Clean, solid linework with a few flat colors converts almost cleanly. Painterly brushes, grain, glow, and soft gradients produce messy, heavy paths, and in some cases you're better off redrawing over the original.
Step 1: Prepare the Procreate Canvas
Most trace problems start in Procreate, not Illustrator. Before you export:
- Work large. A higher-resolution canvas gives the tracing engine more edge information. Soft, low-res edges turn into wobbly paths. Larger canvases mean fewer available layers in Procreate, so test your canvas size early rather than after the illustration is done.
- Separate elements by layer. Put line art, flat color, white shapes, and lettering on their own layers. You'll trace each differently.
- Use hard-edged brushes where vector output is the goal. Textured brushes trace into thousands of tiny shapes.
- Hide anything you don't want traced: sketch layers, guides, paper textures, and background colors.
- Keep colors deliberate. A limited palette gives you cleaner color tracing and smaller files.
Step 2: Export from Procreate
Open the Actions menu, choose Share, and pick a format:
- PNG is the best default. It keeps transparency, so you can trace line art without a white box around it. Hide the background color layer before exporting.
- Layered PSD keeps your layer structure, which Illustrator can open as separate layers. It's useful for complex pieces, though blend modes and effects may not carry over exactly.
- PDF is useful when you want a single high-quality page, but it's still raster content inside.
- JPEG works, but compression artifacts around edges make tracing worse. Use it only if nothing else is available.
For multi-element illustrations, export individual layers or groups as transparent PNGs. Tracing one element at a time gives you much better control over settings. Send the files to your computer via AirDrop, iCloud, or a cable.
Step 3: Open or Place the File in Illustrator
Create a new Illustrator document sized for your end use, then use File > Place to bring in your PNG. Placing, rather than opening, lets you control position and scale inside your artboard. Embed the image if you plan to trace it (the Embed button in the Properties panel). Linked images can still be traced, but embedding avoids broken links later.
If you exported a layered PSD, File > Open will give you layer options. Choose to convert layers to objects if you want to keep the separation.
Step 4: Run Image Trace
Select the placed image and open Window > Image Trace. Turn on Preview so you can see the result before committing. Start with a preset that matches your art:
- Black and White Logo or Line Art for clean ink drawings.
- Sketch Art or Silhouettes for rougher pencil-style work.
- 3 Colors, 6 Colors, or 16 Colors for flat illustrations. Use the lowest count that still captures your palette.
- High Fidelity Photo only as a last resort. It creates dense, heavy paths that are hard to edit.
Then fine-tune in the advanced panel:
- Threshold (for black and white) controls what counts as line versus background. Lower it if thin lines are filling in; raise it if lines are breaking up.
- Paths, Corners, and Noise control accuracy. Higher path and corner values follow the source closely but add anchor points. A higher noise value ignores small specks, which helps with grain.
- Ignore White removes white fills so your traced shapes sit on a transparent background. This matters if you want to place the artwork over footage or other layers later.
For multi-color art, trace each color element separately. White shapes in particular need their own pass, because tracing them against a white background usually fails; export them on a dark temporary background or trace them as inverted shapes.
Step 5: Expand and Clean Up
Image Trace results are still a "tracing object" until you convert them. Click Expand in the control bar (or Object > Image Trace > Expand) to get real, editable vector paths. Then:
- Ungroup and check the shapes. Delete stray specks and unwanted background shapes.
- Simplify with Object > Path > Simplify to reduce anchor points without changing the shape noticeably.
- Fix problem areas with the Direct Selection and Pen tools. Corners, tapered line ends, and overlapping strokes usually need attention.
- Recolor with Recolor Artwork or the Swatches panel so the palette is consistent and named.
- Group and name your layers. If this is going to After Effects, layer naming now saves a lot of confusion later.
Compare against the original at 100% and zoomed in. If you've lost the hand-drawn character you care about, step back and adjust the trace settings rather than patching the result.
Step 6: Save for the Destination
Choose the format based on where the artwork goes next:
- .ai for continued editing in Illustrator and for import into After Effects.
- .svg for web, cutting machines, and apps that accept SVG.
- .pdf for print handoff or sharing with clients.
- .png or .eps if a downstream tool needs something else.
Taking the Artwork into After Effects
For motion work, this is where the vector conversion pays off. Import the .ai file into After Effects as a composition with retained layer sizes to keep your layer structure. Then right-click a layer and choose Create Shapes from Vector Layer to convert it to native shape layers, which lets you animate paths, trim paths, and fills. Check that your layers are on separate Illustrator layers first, since the import follows that structure. Keep shape counts in mind: an over-traced illustration with thousands of paths will slow your comp and become hard to animate.
When Tracing Isn't the Right Answer
Image Trace is a shortcut, not a perfect redraw. Consider rebuilding in Illustrator by hand when:
- The artwork will be a brand mark or something scaled across many uses, where exact curves matter.
- The piece relies on textured brushes, grain, or painterly gradients that vector shapes can't reproduce.
- You need clean, minimal anchor points for rigging or path animation.
A common hybrid approach is to place your Procreate art on a locked, dimmed layer and redraw the key shapes with the Pen tool on top, then use tracing only for secondary elements.
Where Styleframe Fits in the Pipeline
Not every Procreate-to-Illustrator move is about getting clean vectors. Sometimes the real goal is getting hand-drawn art into motion, and a vector trace is just one way to get there. If you need a stylized look in motion rather than editable paths, Styleframe (styleframe.ai) is an AI video and motion tool built for artistic control. You can draw keyframes in Procreate, then use Frames-to-Video to generate motion between them, with the result driven by your reference images, clips, and keyframes rather than a one-click black box.
A few Styleframe tools line up with problems you hit in this workflow:
- Restyle and Ink-and-Paint apply a reference-driven style transfer, so you can push footage or renders toward your illustrated look without tracing every frame.
- Remove Background isolates a subject so you can composite it, similar to exporting transparent PNGs from Procreate.
- 4K Upscale helps when a source raster is too small for your delivery resolution.
- 2D-to-3D and Turntable can extend a flat illustration into dimensional views for animation reference.
Styleframe complements Illustrator rather than replacing it. Use Illustrator when you need true vector paths, and Styleframe when you want stylized motion from your drawn frames.
Troubleshooting
Lines look jagged or lumpy after tracing. The source resolution is probably too low. Re-export from a larger canvas, or lower the Noise setting and raise Paths.
White box around the trace. You exported with a background layer visible, or Ignore White is off. Re-export with a transparent background or enable Ignore White.
Colors look off or posterized. Increase the color count in your preset, or use the Limit Palette option to pull from your swatches.
File is huge and slow. The trace has too many anchor points. Simplify paths, reduce color count, or trace in smaller sections.
Hatching or fine texture turned to mush. Image Trace struggles with dense fine detail. Trace at a higher resolution or redraw those areas with the Pen or Pencil tool.
Summary
Procreate gives you pixels, and Illustrator turns them into paths, so success depends on preparation. Draw with hard-edged brushes on separate layers, export transparent PNGs at high resolution, trace each element with settings that suit it, expand, and clean up. From there, the .ai file goes straight into After Effects for animation, and tools like Styleframe can help when your goal is stylized motion rather than vector precision.