How to Export Procreate for Print
StyleFrame Team7 min read
To export Procreate artwork for print, work on a canvas sized to the final print at 300 DPI (plus bleed if your printer needs it). Then open Actions → Share, choose PDF for most print shops (or TIFF or PNG for lossless raster files), and tap Save to Files. Match the color profile to your printer's requirements, flatten a duplicate rather than your working file, and order a proof if color matters.
Set up the canvas for print first
Most print problems in Procreate come from the canvas setup, not from the export. The pixel dimensions you start with are the pixels you print with.
Size the canvas to the print. In the Gallery, tap +, then the custom canvas icon. Switch the unit from pixels to inches or millimeters and enter the final trim size. If you're printing 8" × 10", the canvas should be 8" × 10" before bleed.
Set 300 DPI. This is the standard for professional print. At 300 DPI, an 8" × 10" print is 2400 × 3000 px. Screen-oriented values like 72 DPI will look soft on paper, and resizing after the fact only makes it worse. If you're unsure, go larger, because scaling down keeps detail and scaling up doesn't.
Add bleed up front. Procreate has no bleed tool, so build it into the canvas. The usual bleed is 0.125" (3 mm) per side. An 8" × 10" print with bleed becomes 8.25" × 10.25", or 2475 × 3075 px at 300 DPI. Keep critical elements, especially type, roughly 0.25" inside the trim line.
Choose the color profile deliberately. You can change it on an existing canvas under Actions → Canvas → Canvas Information → Color Profile. Changing it later can shift your colors, so decide before you paint (see the color section below).
Save a template. Name the canvas with its size and DPI (for example "A4_bleed_300dpi") so you can reuse it.
Check your device limits too. Canvas size and layer count compete for the same memory, so a large print-size canvas leaves you fewer layers. If you need a big format, plan your layer structure around that.
Step-by-step: exporting from Procreate
Export from the canvas
- Finish your work and duplicate the artwork in the Gallery (swipe left, tap Duplicate). Keep the layered original untouched.
- In the duplicate, open Actions (wrench icon) and tap the Share tab.
- Pick your format: PDF, PNG, TIFF, JPEG, PSD, or native Procreate.
- Wait for the export to finish, then tap Save to Files and choose a destination. Cloud storage is easiest to reach through the Locations list in the Files window.
Export from the Gallery
Swipe left on a canvas and tap Share. The format menu is the same. To export several pieces, tap Select, choose your canvases or Stacks, tap Share, and pick a format.
Where "Save Image" disappears
If you pick PDF, the native Procreate format, or the artwork's resolution is very high, the option to save to Photos won't appear. Use Save to Files instead. For print work you'll usually want Files anyway.
If you export multiple canvases as one PDF, each artwork becomes its own page in a single file. That works for a multi-page zine or proof set, but not if your printer expects one file per piece.
Choosing the right file format
If the print shop publishes specs, follow those over any general advice. A printer asking for a flattened PDF at 300 DPI with 3 mm bleed gets exactly that.
RGB vs CMYK: pick based on the printer
This is the most contested part of Procreate-to-print workflows, and the advice varies for a reason. Procreate supports both RGB and CMYK profiles. Printing is CMYK in the end, because ink on paper can't reproduce the same light-emitting gamut as a screen.
Your realistic options:
- Work in CMYK from the start if you're printing on a commercial press and want the on-screen colors to approximate the final result. The palette will look duller, but the surprises are smaller.
- Work in RGB (sRGB or Display P3) if the work is mainly for screens, or if your printer converts RGB files itself. Wide-gamut RGB suits giclée printing well. Many print shops accept RGB and convert on their end, but you give up control over how the conversion handles saturated colors.
- Convert in another app if your printer demands CMYK and Procreate's own CMYK handling gives you trouble. Photoshop is a common choice because you can soft-proof and adjust out-of-gamut colors manually.
Whichever route you take, keep your display brightness moderate while you judge color. A bright iPad screen makes artwork look lighter than it will print. And never send an RGB version to a client as the color reference for a CMYK print, because they'll expect the vibrancy to carry over.
Flatten, name, and check before sending
Layers are for working; most printers want flat files.
- Work on a duplicate. Keep the layered Procreate file as your master.
- Flatten for export.
- Name the file clearly, for example
ArtworkName_8x10_300dpi_CMYK.pdf. It sounds trivial, but it prevents the wrong version going to press. - Inspect at 100% zoom for pixelation, soft edges, or blurry type.
- Verify bleed and margins by looking at the edges and confirming nothing important sits too close to the trim.
- Order a proof for color-critical or limited-edition work. Digital proofs reveal RGB-to-CMYK shifts that no monitor will show accurately.
Common mistakes to avoid
- Starting at screen resolution (72 or 132 DPI) and trying to fix it later
- Resizing the finished piece instead of setting the right canvas size
- Forgetting bleed, then getting white slivers at the trim
- Exporting JPEG at low quality
- Sending a layered Procreate or PSD file when the printer expects a flat PDF
- Skipping the proof on a color-sensitive job
Using Procreate art in a motion pipeline
If you work in After Effects, Premiere Pro, Cinema 4D, Blender, or Nuke, Procreate often sits upstream: you sketch a boardframe or paint a texture, then hand it off. Print is a separate output target with its own rules, so keep two export paths:
- Print master: Print-size canvas, 300 DPI, bleed included, flattened PDF or TIFF.
- Motion master: Layered PSD or PNG sequence at your comp resolution, with layers named and organized for After Effects.
Procreate also exports animation frames. Using Actions → Share on an animation lets you output each frame as an individual file, which gives you an image sequence for your compositor. Keep in mind that a canvas sized for print (say 2475 × 3075 px) probably won't match a video frame size, so decide which deliverable drives the canvas before you start painting.
Quick checklist
- Canvas at final trim size plus 0.125" (3 mm) bleed
- 300 DPI
- Color profile chosen to match the printer's workflow
- Layered master saved; duplicate flattened
- Exported via Actions → Share → PDF or TIFF → Save to Files
- Filename includes size, DPI, and color mode
- Checked at 100% zoom and proofed if color matters
FAQ
What's the best export format for printing from Procreate? PDF is the most widely accepted for professional printing. TIFF is a good choice when you need maximum quality, and PNG works for simple artwork. Always confirm with your printer.
Can I fix the DPI after I've finished the artwork? Changing resolution after the fact means resampling, which can soften details. It's better to start with the correct size, and if you must enlarge, do it only slightly.
Do I need CMYK? Not always. Some printers want it, while others accept RGB and convert it. If your printer's specs say CMYK, follow them, and consider a proof either way.
Why can't I save my PDF to Photos? PDF and native Procreate files, and artwork with very high resolution, can only be saved through Save to Files.