How to Export Nomad to Procreate
StyleFrame Team7 min read
To export a Nomad sculpt to Procreate, give the model UVs, then export it as an OBJ and import that file into Procreate. In Nomad, decimate the mesh, run the UV unwrap, and export as OBJ. Procreate rejects OBJ files without UVs and reports "missing UVs", so the unwrap step is the one that matters. After painting, you can bring the textures back into Nomad by exporting an OBJ from Procreate, zipping the folder, and loading it into a PBR UV material.
The short version
- Finish the sculpt, or at least the shape you want to paint.
- Decimate the mesh to a manageable polygon count.
- Run Nomad's UV unwrap on the model.
- Export as OBJ from Nomad and save the file where Procreate can reach it.
- In Procreate, import the OBJ as a 3D model and paint.
- To return to Nomad, export the painted model from Procreate as OBJ, zip the resulting folder, and import the zip into Nomad.
The rest of this article covers each step and the places this workflow breaks.
Why Procreate rejects some Nomad exports
Procreate's 3D painting depends on UV coordinates, which tell the app how the 3D surface maps onto a flat texture. A sculpt built with dynamic topology or voxel remeshing usually has no usable UVs. Nomad exports the geometry fine, but Procreate has nothing to paint onto and refuses the file.
Procreate's team has said on its ideas board that automated UV mapping isn't currently planned, noting that it is harder than it looks. Any UV preparation therefore has to happen before the model reaches Procreate, and for a Nomad-to-Procreate workflow that means doing it in Nomad.
Step 1: Prepare the mesh in Nomad
Sculpt as you normally would, but plan for UVs before you finish.
- Decimate first. A very dense mesh is slow to unwrap and heavy in Procreate. Decimating a couple of times gives a lighter model that is easier to import. This is also the advice community members give for a first test.
- Know which tools destroy UVs. Voxel remeshing and dynamic topology rebuild the surface, which discards existing UVs. If you have already unwrapped and plan to keep sculpting, avoid voxel remesh. Adjusting forms with regular brushes keeps the UV layout intact.
- Test with a simple object. If you haven't done this before, try the default sphere. Decimate it, unwrap it, export it, and import it into Procreate. Once that works, you know the pipeline is sound and any later failure comes from the model.
Step 2: Unwrap the UVs
Use Nomad's auto-unwrap function on the mesh. The result is automatic and not hand-tuned, so expect seams in places you wouldn't have chosen. For a stylized character, prop, or concept piece painted in Procreate, that is usually fine. For a hero asset where seam placement matters, an unwrap in Blender or another desktop tool gives you more control, though that takes the workflow off the iPad.
Complex, organic sculpts are where automatic UVs struggle. Smooth, simple forms usually unwrap more cleanly than a model with deep folds, overlapping parts, or lots of small details.
Step 3: Export from Nomad as OBJ
Export from Nomad and choose OBJ. Make sure normals are included in the export options, since that was part of the working method in the community threads. Save the file somewhere accessible from Procreate, such as the Files app, iCloud Drive, or a dedicated folder.
Keep the OBJ in its own folder. That matters later when you re-import textures, and a clean folder also avoids confusion with other exports.
Step 4: Import into Procreate
In Procreate, use the import option and select your OBJ. If the UVs are present, the model loads as a paintable 3D object.
You may see an overlapping-UV warning. Users report that the model still imports and paints despite it. The warning means parts of the UV layout share texture space, so paint on one area can show up on another. If you see mirrored or doubled strokes, that overlap is the likely cause. Re-unwrap the mesh, or fix the UVs in a desktop tool.
Once imported, paint the model as usual. Procreate's 3D painting is well suited to color, simple surface detail, and quick look development.
Step 5: Send the painted model back to Nomad
Procreate doesn't re-export your texture to Nomad automatically. The reliable method from the community is:
- In Procreate, export the painted model as OBJ. This produces a folder containing the geometry and texture files.
- Compress that folder into a zip. On iPad, choosing Compress on the folder creates the zip.
- Drag or import the zip into Nomad.
- Apply a PBR UV material so the textures display on the mesh.
- If textures don't land in the right channels, assign them manually: color, roughness, and metalness. Working in Nomad's 2D view makes this easier.
A newer option is to project textures back onto the mesh as vertex color. A forum reply mentioned this as coming in version 1.77. Check your current version and release notes to see how it works in your build, since it can simplify round-tripping for some models.
The round-trip problem
The step that causes the most trouble is going back and forth more than once. A common report: you paint in Procreate, return to Nomad, change the sculpt, send it to Procreate again, and the paint is gone. The likely cause is that there is no way to re-export the whole Nomad project as an OBJ with the textures, so a fresh OBJ comes in unpainted.
A few practices reduce the pain:
- Lock the topology before painting. Make your major form decisions first. Late changes are what break the round trip.
- Avoid voxel remesh after unwrapping. It discards the UVs the paint depends on.
- Keep texture exports. Save the texture maps from Procreate separately, so you can reapply them if an import drops them.
- Re-import the OBJ, not the whole folder, when updating. Users report that importing a whole folder into Nomad doesn't always reload the textures. Import the OBJ alone, then assign the texture images to the material channels yourself.
- Version your files. Name exports with version numbers so you can step back when an import goes wrong.
Even with care, treat this as a one-way pipeline with an occasional return trip, not a live link.
Troubleshooting common failures
"Missing UVs" error. The model hasn't been unwrapped, or a remesh or voxel operation removed the UVs. Unwrap again and re-export.
Model imports but looks broken or has holes in the paint. Automatic UVs may have produced poor coverage. Simplify the mesh and unwrap again, or use a desktop tool for the UVs.
Textures don't appear back in Nomad. Confirm the material is set to PBR with UVs, then assign the color, roughness, and metalness textures to their slots manually.
Mesh is too heavy. Decimate before unwrapping. Heavy meshes slow both apps and complicate the UV result.
Paint disappears after editing the sculpt. Expected behavior if UVs changed. Reproject from saved textures, or use the vertex-color projection feature if your Nomad version offers it.
Alternatives when this workflow isn't enough
Some artists use a middle app to get UVs. Forger and Armor Paint have automatic UV generation, and some users have chained Nomad into Forger and then Procreate. The tradeoff is quality: the complex sculpts in those reports lost detail and produced incomplete UV maps. It can work for simple models, but it isn't dependable for intricate ones.
For production work, many experienced 3D artists suggest doing UVs in Blender or a similar desktop package. If your end goal is a render for a motion piece, a game asset, or something that needs clean topology, the desktop route usually saves time even though the iPad-only route is more convenient.
Where Styleframe fits in a motion pipeline
If the Procreate-painted model is going into a video or motion project, the model itself is rarely the final deliverable. You usually need stills, turntables, or styled sequences that drop into a composite. is one tool to look at for that stage; check its site for current features.
Final checklist
- Decimate the mesh and unwrap UVs in Nomad.
- Export as OBJ with normals into a dedicated folder.
- Import the OBJ into Procreate and paint.
- Export from Procreate, zip the folder, and import into Nomad with a PBR UV material.
- Avoid voxel remesh after unwrapping, keep texture exports, and lock your forms before painting.
- Use Blender or another desktop tool when the model is complex or the UVs need to be precise.