How to Erase on Procreate
StyleFrame Team8 min read
To erase in Procreate, tap the Erase icon (the eraser) at the top right of the canvas so it highlights, choose a brush, set size and opacity with the left sidebar sliders, and drag with your finger or Apple Pencil. Any brush in the library works as an eraser, and tapping the Erase icon a second time opens its brush library. If the eraser leaves faint marks or paints instead of removing pixels, the cause is usually brush opacity, Apple Pencil pressure settings, or Gesture Controls.
Erase with the Erase tool
Paint, Smudge, and Erase are the three core tools in the top right of the interface. Each tool remembers its own brush, so you can paint with a textured brush and erase with a hard one without changing anything in between.
- Select the layer you want to erase from. Erasing only affects the active layer, so being on the wrong layer is a common reason "nothing happens."
- Tap the Erase icon once so it turns blue.
- Tap it again to open the brush library and pick a brush.
- Set size and opacity with the two sliders on the left sidebar. The upper slider controls size, the lower controls opacity.
- Drag across the canvas to remove pixels.
Erase on a layer with transparency and you carve real holes in it. On a layer with a background color, you reveal whatever sits below. If you're erasing on the layer that holds your paper color, you'll get what looks like white strokes. Keep your background on its own layer.
Choose the right eraser brush
Because every brush works as an eraser, the brush you choose defines the edge quality of the result.
- Hard Airbrush (from the Airbrushing set) is a reliable default for clean, fully opaque erasing. Procreate staff have pointed to it as a go-to for this job.
- Soft brushes fade edges, which helps with vignettes, glow falloff, and feathered shading.
- Textured or inking brushes break up the edge, so a cutout looks like it was made with the same medium as the artwork.
Matching your eraser to the brush that made the stroke keeps a consistent style. If you inked a shape with a dry, gritty brush, a perfectly hard eraser will leave edges that look pasted on.
Use opacity to erase partially
Lowering the opacity slider reduces how much pigment each pass removes. That makes the eraser useful for fading, lightening, and building soft transitions rather than only deleting. For motion work, this is handy when you're making gradient mattes, light leaks, or grain-based textures that you'll later drop into After Effects as overlays.
Switch between Paint and Erase faster
You don't need to hunt through the brush library every time. Tap and hold an unselected Paint, Smudge, or Erase icon and Procreate transfers your current brush and its settings to that tool. Painting with a custom brush and want that exact brush as an eraser? Hold the Erase icon and you're done.
Undo and redo gestures also save time while cleaning up: tap with two fingers to undo, three fingers to redo. Heavy erasing is easy to overdo, so it's worth building the habit of undoing right away.
Erase straight lines and clean shapes
Freehand erasing struggles with long, straight edges. There are two reliable workarounds.
Method 1: Selection and Cut
- Tap the Selection tool (the S icon).
- Choose Freehand and tap the corners of the area to remove, closing the shape.
- Swipe down with three fingers to open the Copy & Paste menu.
- Tap Cut.
This gives you a precise polygonal removal, which suits mechanical shapes, UI mockups, and hard-edged graphics.
Method 2: QuickShape while erasing
Draw an erase stroke and hold at the end. QuickShape kicks in and snaps the stroke to a straight line. While you keep holding, you can lengthen, shorten, or rotate it from the start point. This works well for cleaning up edges or redefining a silhouette where a selection would be overkill.
Use non-destructive erasing instead
Erasing is destructive: once you've removed pixels and moved on, they're gone. If you're building assets that will go into a compositing pipeline, consider a non-destructive approach.
- Layer masks let you hide parts of a layer by painting on the mask, then restore them by painting back. This is the same logic you use in After Effects with masks and track mattes.
- Duplicate the layer before a risky erase pass, then hide the original.
- Alpha Lock and Clipping Masks let you keep edits confined to existing shapes rather than carving them up.
- Separate layers per element so you can erase one part of an illustration without touching another.
When you export, PNG and PSD both preserve transparency, so clean erasing on an isolated layer translates directly into usable alpha when you bring the file into After Effects, Photoshop, or Nuke.
Fix common eraser problems
The eraser leaves a faint outline
If a line looks mostly erased but a light ghost remains, check your Apple Pencil pressure settings. On the default Round Brush, the opacity slider under Apple Pencil pressure can be set so full opacity only occurs at maximum pressure. Finger erasing removes everything, while the Pencil leaves traces unless you press hard.
Fixes:
- Press harder with the Pencil to confirm that's the cause.
- Duplicate the brush, open its settings, go to the Pencil tab, and adjust the opacity-under-pressure slider (for example, toward the midpoint). Use the duplicate as your eraser.
- Switch to a different eraser brush such as the Hard Airbrush.
Duplicating before editing means you don't wreck the original brush.
The eraser makes marks instead of erasing
If the Erase tool paints gray or colored marks, or only erases partially, check these in order:
- Brush opacity. Make sure the bottom sidebar slider is at maximum, then test with the Hard Airbrush.
- Gesture Controls. Go to Actions > Prefs > Gesture Controls and confirm that both Apple Pencil and Touch are set to use the Selected Tool. A mismatch here can make the Pencil behave as a different tool than the one you highlighted.
- Active tool state. Verify the Erase icon is actually highlighted. It's easy to be on Paint or Smudge without noticing.
- Active layer. Confirm you aren't on a locked layer, a different layer, or a layer with Alpha Lock enabled.
Before reinstalling the app, which is a heavy fix, work through these settings. Most eraser issues come from a setting that was changed accidentally.
Stabilization makes the eraser feel sticky
If the eraser seems to drag behind your stroke, StreamLine (stabilization) is likely turned up on that brush. It smooths wobbly hands, but it can feel lagging when you want snappy cleanup. Duplicate the brush, set StreamLine lower or off, and use that version for erasing.
Where Procreate erasing fits in a motion pipeline
Many motion designers and animators use Procreate for the early and middle stages of a project: storyboards, character designs, textures, brush-based mattes, and stylized frames. Clean erasing matters because everything downstream inherits it. Rough edges and stray marks on a hand-drawn element show up as flicker or fringing once it's animated or composited.
Practical habits that carry over to production:
- Keep each element on its own layer with a transparent background.
- Erase with a hard-edged brush when you need a clean alpha, and a soft brush when you want a feathered one.
- Export isolated elements as PNG with transparency, or as a layered PSD for After Effects.
- Name layers consistently so they remain manageable when imported.
Taking your Procreate artwork further with Styleframe
Once you've cleaned up an illustration or styleframe in Procreate, you may want to move it into motion without redrawing every frame. is an AI video and motion tool built for artists who need control over the result, not a one-click black box. Generations are driven by reference images, video clips, and keyframes, and iteration is non-destructive, so you can refine without losing earlier versions.
A few tools map naturally to illustration work:
- Frames-to-Video is keyframe-driven, so your Procreate frames can act as the start and end points of a shot.
- Restyle and Ink-and-Paint use reference-driven style transfer, which lets you carry the look of your hand-drawn artwork onto other footage or imagery.
- Remove Background helps isolate subjects when you're working from images rather than clean layers, and it can save time when you haven't erased something by hand.
- 2D-to-3D and Turntable extend a flat design into dimensional views for look development.
- 4K Upscale brings output up to production-ready 4K.
Styleframe exports image sequences and sits alongside After Effects and Nuke, so you keep your compositing workflow. An After Effects plugin is on the way. Erasing by hand in Procreate remains the right tool for precise, deliberate edits, and Styleframe is there when you want to extend that work into motion while keeping direct control over references and keyframes.
Quick reference
- Erase: Tap the Erase icon, pick a brush, drag on the canvas.
- Change brush: Tap the Erase icon again.
- Partial erase: Lower the opacity slider.
- Match your paint brush: Tap and hold the Erase icon.
- Straight erase: Use Selection with Cut, or hold at the end of a stroke for QuickShape.
- Undo/redo: Two-finger tap / three-finger tap.
- Faint remnants: Check Apple Pencil pressure opacity or switch to the Hard Airbrush.
- Marks instead of erasing: Check opacity, Gesture Controls, the active tool, and the active layer.
Getting erasing right is mostly about three decisions: which brush, which layer, and whether the change should be reversible. Make those choices on purpose and your Procreate files will move cleanly into the rest of your pipeline.