How to Erase Completely in Procreate
StyleFrame Team8 min read
To erase completely in Procreate, select the Erase tool in the top right of the canvas, tap it again to open the brush library, pick a hard brush such as Hard Airbrush, and set the Brush Opacity slider in the left sidebar to maximum. If a faint ghost line remains, the usual cause is a pressure-to-opacity setting on the brush you chose, so switch to a hard-edged brush or duplicate the brush and neutralize that setting. For large areas, use Selection and Clear, or clear the whole layer.
The fast way to erase fully
Procreate has three core tools next to each other: Paint, Smudge, and Erase. Each tool keeps its own brush, so changing your paintbrush does not change your eraser.
- Tap the Erase icon (the eraser) at the top right. It should be highlighted blue.
- Tap it a second time to open the brush library and choose a brush. Any brush can be an eraser.
- Set the Brush Opacity slider (the lower slider on the left sidebar) to the top.
- Check the Size slider above it, then drag over the strokes you want removed.
- Make sure you are on the layer that holds the artwork.
A hard-edged brush is the most reliable choice for complete removal. Hard Airbrush from the Airbrushing set is a common go-to, because it produces a solid edge and does not depend on texture or grain. A textured brush, such as a charcoal or grain brush, will erase unevenly because the texture itself is part of the stroke.
If you want your eraser to match your drawing brush, tap and hold an unselected tool icon. This transfers the current brush settings to that tool, so you can erase with exactly the same shape and size you painted with.
Why the eraser leaves a faint outline
A common complaint is a light ghost of the old line, even with opacity at 100%. This is rarely a bug. It comes from how the brush responds to input.
Pressure-sensitive opacity on the brush
Many Procreate brushes, including the default round brush, have an Apple Pencil Pressure setting that ties opacity to how hard you press. With a light touch, the eraser removes only part of the pixel's opacity, leaving a trace. Pressing harder usually clears it. A finger does not trigger this behavior, which is why erasing with a fingertip often works perfectly when the Pencil does not.
You have two clean fixes:
- Use a different eraser brush. Hard Airbrush is the simplest swap.
- Duplicate your brush and edit the duplicate. Swipe on the brush in the library and tap Duplicate. Open the duplicate's settings, go to the Apple Pencil tab, and bring the Opacity slider under Apple Pencil Pressure down to a neutral position so pressure no longer reduces opacity. Use that duplicate as a dedicated eraser.
Duplicating before editing matters. It leaves your original brush intact, which is useful when you are working from a shared brush set in a production team.
Opacity and flow in the sidebar
If the Brush Opacity slider is anywhere below the top, the eraser removes only that fraction of the pixel per pass. This is useful for fading and softening, but it is the opposite of what you want for a clean delete. Raise it to the maximum.
Stabilization and soft edges
Soft brushes feather their edges by design, so a soft eraser will always leave a gradient around the edge of your stroke. Use a hard brush for clean cutouts. If your lines wobble, the Streamline setting under a brush's Stabilization options smooths your stroke, though it can feel "sticky" and cause hesitation on tight corners. Turn it down or off for precise edge work.
When the eraser makes marks instead of erasing
If the Erase tool paints gray or colored marks, or erases partially while also depositing something, check these in order:
- Gesture Controls. Open Actions > Prefs > Gesture Controls and confirm that Apple Pencil and Touch are both set to Selected Tool. A different setting can make the Pencil or finger behave as a different tool than the one highlighted. This menu was formerly called Advanced Gesture Controls.
- Brush opacity. If only part of the content disappears, opacity is more likely than gesture settings. Select Hard Airbrush as your eraser, push the opacity slider to the max, and test with varied pressure.
- Active tool. Confirm the Erase icon is the one highlighted. It is easy to tap Paint or Smudge by accident.
Reinstalling the app is almost never necessary. Check the preferences first, because a setting toggled by accident is far more likely than a corrupt install.
Erasing large areas and whole layers
Dragging an eraser across a large area is slow and imprecise. Procreate has faster options:
- Selection plus Clear. Use the Selection tool (S icon) with Freehand, Rectangle, or Ellipse to isolate an area, then swipe three fingers down to open the Cut, Copy, and Paste menu and tap Clear. This removes everything in the selection on the active layer at full strength, with no residue.
- Clear a layer. Open the Layers panel and use the Clear option for the layer. The layer stays in place but becomes empty, which keeps your layer structure and any clipping or blending settings.
- Delete a layer. Swipe left on the layer and tap Delete if you want it gone entirely.
- Layer masks. For non-destructive erasing, add a layer mask and paint black on the mask to hide pixels. Paint white to bring them back. If you may change your mind, this is safer than erasing, and it mirrors how you would work with masks in After Effects or Photoshop.
If you erase something by mistake, tap with two fingers to undo and with three fingers to redo.
When nothing seems to erase at all
If the eraser does nothing, the cause is usually one of these:
- Alpha Lock is on. With Alpha Lock enabled, the layer's transparency is protected, so erasing does not remove pixels. Tap the layer thumbnail and turn Alpha Lock off.
- Wrong layer. The eraser only affects the active layer. If the artwork sits on another layer, nothing happens. Check the Layers panel.
- An active selection. If a selection is active, the eraser only works inside it. Tap the Selection tool to deselect.
- Background Color layer. Erasing on the background color layer does not create transparency. Hide that layer if you need a transparent export.
- Reference layer or clipping mask. A layer clipped to another one only shows where the base layer has content, so what looks like "unerased" art may be a different layer.
Verifying the erase for animation and compositing
Anyone moving Procreate artwork into After Effects, Premiere Pro, Nuke, or Blender should verify transparency before export, because faint residue becomes visible once the art is composited over a dark or colored background.
- Hide the Background Color layer and temporarily place a high-contrast color layer under your art to reveal low-opacity leftover pixels.
- Zoom in on edges. Light fringing along an outline often means a soft eraser was used.
- Export as PNG to keep the alpha channel. JPEG flattens transparency onto a solid background.
- For frame-by-frame work, keep each frame's layers clean and export as a PNG sequence so your compositor receives consistent alpha.
Cleaning up before export is much cheaper than fixing stray pixels with a matte or garbage mask in compositing.
Where Styleframe fits in a Procreate workflow
Procreate is great for hand-drawn frames, storyboards, textures, and style references, and the techniques above keep those assets clean. Sometimes you need to take that work further without redrawing it, and that's where Styleframe can fit.
- Remove Background can isolate a subject from a photo or generated frame, which helps when erasing by hand would take too long and you need a clean cutout to paint on top of in Procreate.
- Frames-to-Video is keyframe-driven, so clean Procreate frames can serve as start and end keyframes, with the motion between them generated from your own drawings rather than a text prompt alone.
- Restyle and Ink-and-Paint use reference images or clips to apply a visual style, so a hand-drawn Procreate look can guide the output.
- 4K Upscale brings output to production resolution.
Styleframe exports image sequences, so the result slots into the same After Effects or Nuke compositing setup you already use. Generations are driven by your references and keyframes, and iteration is non-destructive, so you can refine without losing earlier versions. Clean source art, which is what this article is about, gives those references the best chance of producing the result you want.
Quick checklist
- Erase tool selected and highlighted.
- Hard-edged brush chosen (Hard Airbrush is a reliable default).
- Brush Opacity at maximum.
- Apple Pencil Pressure opacity neutralized on a duplicate brush if ghosting persists.
- Gesture Controls set to Selected Tool for both Pencil and Touch.
- Correct layer active, Alpha Lock off, no stray selection.
- Selection plus Clear for big areas, layer Clear for whole layers, masks for non-destructive edits.
- Transparency checked over a contrasting color before exporting a PNG.
Following this order should solve many cases of an eraser that will not fully erase. Start with the brush and opacity, then check gesture settings, and finally layer state.