How to Erase a Color in Procreate
StyleFrame Team8 min read
To erase a single color in Procreate, open the Selection tool, choose Automatic, and tap and hold on the color. Drag your finger left or right to set the threshold, then swipe down with three fingers and tap Cut to delete everything selected. Procreate has no one-tap "erase by color" command, so Automatic Selection is the closest built-in method. A clipping-mask Subtract blend mode is a non-destructive way to hide a color without deleting pixels.
Why Procreate Doesn't Have a "Erase This Color" Button
Many artists expect Procreate to mirror Color Drop. Drag a swatch onto an area and it fills. There is no matching drag-to-erase gesture. The "Clear" button in the selection toolbar is also misleading. It only removes the selection outline and leaves the pixels untouched. Procreate's team has said an exact-color clearing tool isn't directly planned, so the workflow is a selection followed by a delete.
Which method fits depends on the job:
- Deleting a flat color to get transparency: Automatic Selection plus Cut or Clear.
- Cleaning a JPEG with a white background: Automatic Selection with a higher threshold, or Multiply blend mode if you only need the white to disappear visually.
- Hiding a color without destroying it: a clipping mask with Subtract.
- Isolating a subject from a complex photo: a dedicated background-removal step, covered below.
Method 1: Automatic Selection, Then Cut or Clear
This is the method most artists end up using, and it produces real transparency.
- Select the layer that contains the color.
- Tap the Selection tool and choose Automatic at the bottom of the screen.
- Tap and hold on the color you want to remove.
- Keep your finger down and slide left or right to adjust the threshold until the selection picks up everything you want.
- Lift your finger. The selected area is marked with the marching-ants pattern.
- Swipe down with three fingers to open the Cut, Copy, and Paste menu, then tap Cut. Alternatively, scrub three fingers back and forth across the canvas to clear the selected pixels.
Cut and the three-finger clear gesture both leave the selected area transparent. If you only want to see what you're about to remove, use the Color Fill option in the selection toolbar first to flood the selection with a bright color as a preview, then undo.
Selecting Colors That Aren't Connected
Automatic Selection works on the area you tap. If the same color appears in several separate regions, such as the white inside letters and the white background, a single tap won't catch all of them. Switch to Add mode in the selection toolbar and tap each additional region. Apply the same threshold drag to each. When you've collected everything, cut once.
Working Around the "Wrong Layer" Problem
Automatic Selection samples the active layer, not the visible composite. If you are tapping a color and nothing sensible gets selected, check that you're on the layer that actually contains the pixels. Flattened imports, such as a JPEG dropped into a canvas, sit on one layer, so this is usually straightforward. In layered illustrations, the color you see might be a combination of several layers. In that case, merge the relevant layers first, or duplicate and merge into a working copy so the original stays intact.
Method 2: Cleaning Up a JPEG or Scan
Anyone who has tried to knock out a white background from a JPEG knows the problem: the "white" isn't one value. Compression introduces noise, and edges have anti-aliased halos that look fine on white and ugly on anything darker.
Practical adjustments:
- Raise the threshold gradually. Start low, check the selection, and increase until stray speckles are included. Overshooting eats into light parts of your linework.
- Use Feather sparingly. A very small feather softens the edge so the cut doesn't leave a hard, jagged line. Too much will blur your outline.
- Invert instead of chasing the background. If your subject is easier to select than the background, select the subject, tap Invert, and cut the background.
- Preview on a dark layer. Drop a dark fill layer underneath and toggle it on after cutting. Light fringes that were invisible on white become obvious, and you can clean them with the Eraser tool.
- Export correctly. Hide the Background Color layer in the Layers panel before exporting, and choose PNG. Otherwise your "transparent" art will export with a solid background.
If the artwork is line art on white, there is a shortcut. Duplicate the layer, set the blend mode to Multiply, and the white effectively disappears against whatever is below. It isn't true transparency, and exports of that single layer will still contain white, but it works for quick coloring workflows where lines sit above color layers.
Method 3: Subtract Blend Mode in a Clipping Mask
If you want to remove a color from an image without deleting any pixels, a clipping mask with a blend mode does the job nondestructively.
- Add a new layer above your image.
- Tap the new layer and choose Clipping Mask so it affects only the layer beneath.
- Pick the color you want to remove with the Color picker (the eyedropper gesture works for this) and fill the clipping layer with it.
- Tap the N next to the layer and set the blend mode to Subtract.
The color is subtracted from the image values underneath. Repeat with a duplicate of the image to remove a different color, such as taking red out of one copy and green out of another.
Understand what this does. Subtract is math on color channels, not a selection. It shifts the other colors in the image too, so you may see hue changes in areas you didn't intend to touch, and it doesn't produce alpha transparency. It suits color experiments, channel-style effects, and look development. It's not the right choice for cutting out assets for compositing.
Because the effect lives on its own layer, you can adjust the fill color, lower the layer opacity, or hide it entirely at any time.
Method 4: Erase by Hand, but Faster
Sometimes the color region is small or irregular and a selection is more work than it's worth. Some tips to make manual erasing faster:
- Lock in a large, hard-edged brush as your Eraser and use QuickShape or a selection to constrain where it can affect pixels.
- Make a rough freehand selection around the problem area first. Then the Eraser can't leave the mask, which protects neighboring details.
- Use Alpha Lock carefully. It protects transparent pixels from being painted on, and when you erase on an alpha-locked layer, pixels that are already transparent stay unaffected. It's useful for recoloring existing shapes but doesn't help you delete a color.
If you have a selection active, the three-finger scrub clears only inside it, which is often faster than switching to the Eraser.
Getting Procreate Assets Into a Motion Pipeline
For motion designers, Procreate is often where hand-drawn elements get created: textures, character parts, frame-by-frame sketches, or paint-over passes. Clean alpha matters once these assets reach After Effects, Premiere Pro, or Nuke.
A few handoff habits save time:
- Export PNG with transparency, not JPEG.
- Keep a version with the original color. If you cut a background color destructively, you can't recover it. Duplicate the layer before cutting.
- Check edges against dark and light backgrounds. Halos show up in comps as soon as you place art over a different plate.
- Fix fringing in the compositor if needed. Most compositing tools have edge-cleanup options for this. Procreate shouldn't be your last line of defense.
If you were trying to remove a color from live-action or rendered footage instead, Procreate isn't the right tool. Keying tools in your compositor are built for that, and they work across a sequence rather than a single frame.
When the Real Task Is Removing a Background
Plenty of people searching for how to erase a color are actually trying to isolate a subject. The background might be a gradient, a photograph, or a painterly texture with no single color to target. Automatic Selection struggles there because it matches color similarity, not subject boundaries.
For that, a dedicated background-removal step is more efficient. Whichever tool you use, verify the edges and clean up in your own tools.
Quick Troubleshooting
The selection grabs too much. Lower the threshold by dragging the other way, or use Remove mode to tap away unwanted regions.
Speckles remain after cutting. Add mode with a few more taps, or raise the threshold slightly. JPEG noise is the usual cause.
Cut did nothing visible. Confirm you're on the correct layer and that the layer isn't Alpha Locked or hidden. Also check that you're not looking at a Background Color layer that is still on.
The edge looks jagged. Apply a tiny Feather before cutting, or erase the fringe with a soft brush.
The exported PNG has a white background. Turn off Background Color in the Layers panel, then export again as PNG.
Summary
Procreate doesn't erase colors with a single tap, but Automatic Selection followed by Cut or the clear gesture gets you there in a few seconds. Use Add mode for scattered regions, tune the threshold for noisy JPEGs, and use a Subtract clipping mask when you want to hide a color rather than delete it. For subjects against complex backgrounds, switch to a purpose-built background removal or keying tool, then finish the edges in your compositor.