How to Enlarge Files from Procreate for Print on Demand
StyleFrame Team7 min read
To enlarge a Procreate file for print on demand, first calculate the pixel size your product needs (print inches × 300), then pick the method that matches the jump. Small increases can be resampled inside Procreate with Crop and Resize. Bigger jumps work better if you export a lossless PNG or TIFF and run it through a dedicated upscaler in an image editor such as Photoshop or Affinity Photo. Any upscale is reconstruction, not recovery, so inspect the result at 100% before uploading.
Start With the Pixel Math, Not the DPI Label
DPI is mostly metadata. A print house cares how many actual pixels you deliver for the physical size of the product. The formula is simple:
pixels = inches × target DPI
- An 11×14 in print at 300 DPI needs 3300 × 4200 px.
- An 18×24 in poster at 300 DPI needs 5400 × 7200 px.
- A 12×12 in calendar page at 300 DPI needs 3600 × 3600 px, plus bleed if the printer asks for it.
Compare that to what you have. If your canvas is 3000 × 4000 px and the product needs 3300 × 4200 px, you're looking at roughly a 10% enlargement, which is trivial. If you painted on a screen-sized canvas of 2732 × 2048 px and need a poster, you're asking for a 2x or larger jump, and that changes the method.
Before you touch the file, check your print-on-demand provider's template or spec sheet. Requirements vary by product and by provider, so follow the provider's stated minimum. Large pieces are viewed from further away, so a lower effective DPI is often acceptable there, but the provider's number comes first.
Decide How Much You Need to Enlarge
Use these rough guidelines, and verify them against your own artwork:
- Up to about 1.25x: Resampling in Procreate is usually fine, especially for painterly work with soft edges.
- Around 1.25x to 2x: Use a dedicated upscaler. Hard-edged line art and text will show softness sooner than textured painting.
- Above 2x: You're inventing detail. It can look good, but it needs close inspection, and you may need to repaint edges or accept a lower effective DPI.
- Pure line work, lettering, or flat shapes: Consider rebuilding as vector (tracing in Illustrator or similar) instead of enlarging pixels at all.
If you can still edit the project, the best "enlargement" is rebuilding the canvas at the right size and redrawing key elements. It costs more time, but it's the only method that adds real detail.
Method 1: Resample the Canvas in Procreate
This is the fastest route for modest increases and keeps everything in one app.
- Duplicate your artwork in the Gallery first. Resampling is destructive, so keep the original untouched.
- Open the duplicate, tap the Actions (wrench) menu, then Canvas > Crop and Resize.
- Tap Settings and turn Resample Canvas on.
- Enter your new width and height, or set the DPI and physical dimensions so the pixel count matches your target.
- Tap Done and check the result at 100% zoom.
Two things to watch. First, the maximum canvas size depends on your iPad's memory, and larger canvases give you fewer layers. If Procreate won't enlarge to your target, flatten or merge layers you no longer need. Second, textured brushes can look different after resampling, because the grain gets interpolated rather than regenerated. Zoom in on brush texture and edges, not just on flat areas.
Method 2: Build a New, Larger Canvas and Bring the Art In
This approach works well for patterns, repeating tiles, and anything where you want to keep the original file as it is.
- Create a new custom canvas at the final print size and resolution.
- Export your original as a PNG, which is lossless, and insert it into the new canvas, or copy and paste.
- Scale it to fit using the Transform tool.
- Repaint weak areas such as outlines, small details, and edges on new layers at full size.
For seamless patterns, keep the tile's edges aligned. Enlarge using exact numeric values rather than dragging handles, so the repeat doesn't drift. If you need the pattern bigger as a repeat rather than as a single tile, tile the enlarged tile instead of stretching a small one.
The advantage here is the repaint step. Enlarging and then redrawing the outlines and key highlights at full size often gives better print results than any algorithm.
Method 3: Export and Upscale Outside Procreate
When you need a bigger jump than Procreate comfortably gives you, export at full quality and upscale in a tool built for it.
Export first. Use PNG or TIFF for the best quality. Avoid exporting a JPEG and then upscaling it, because compression artifacts get magnified along with everything else. If you're enlarging a layered piece, consider upscaling the flattened version for the base and keeping individual layers only if you need to re-edit.
Choose your upscaler. Options to consider:
- Photoshop or Affinity Photo: Rescaling in a dedicated image editor is a solid general-purpose choice for illustration.
- Dedicated AI upscalers: Useful for painterly and textured art where you want plausible detail added back. Results vary by image, so test on a crop first.
Always verify at 100%. AI and detail-preserving upscalers can introduce artifacts such as smeared hatching, plastic-looking textures, or warped lettering. Compare against the original at the same zoom level, and look at edges, small text, faces, and fine patterns. Repaint or mask in the original where the upscale goes wrong.
A Note on 4K Upscalers
Treat 4K as a size, not a guarantee. A 3840 px wide output covers roughly 12.8 in at 300 DPI. For a 24×36 poster at 300 DPI you'd still need more pixels, so plan on a further upscale or an agreed lower effective DPI.
No upscaler is a replacement for properly sized source art, and none is required for print on demand. They are one option when you need a larger file and have inspected the result carefully.
Export Settings That Protect Your Enlargement
Once the file is at its target size, the last step is not to damage it.
- Color profile: Procreate defaults to RGB. Many print-on-demand providers accept RGB, while others request CMYK. Ask, or read the spec sheet, before converting, because a CMYK conversion can dull saturated colors. If you convert, soft proof in Photoshop or Affinity first.
- Format: Use PNG for transparency, or high-quality TIFF or PDF if the provider requests it. If you must use JPEG, export at maximum quality.
- Flatten when needed: Some providers handle transparency poorly or ignore layers. Flatten a copy for upload and keep the layered master.
- Bleed and safe area: If the provider requires bleed, add it before upscaling so you aren't stretching a cropped edge. Typical bleed is around 0.125 in, but follow the provider's number.
- Order a proof: Screens are backlit and paper isn't. A physical sample catches sharpness and color problems no preview will.
A Quick Decision Checklist
- Calculate the target pixels from the print size.
- Duplicate the artwork and keep the original safe.
- If the gap is small, resample in Procreate with Resample Canvas on.
- If you're building patterns or want to repaint details, use a new canvas.
- If the gap is large, export PNG or TIFF and use a detail-preserving or AI upscaler, then inspect at 100%.
- Repaint trouble spots, check color profile and bleed, and export in the provider's preferred format.
- Order a proof before committing to a full catalog.
Avoid Having to Enlarge Next Time
The easiest enlargement is the one you never do. For future pieces, start the canvas at the largest print size you might sell, in pixels at 300 DPI, even if you only list smaller sizes first. Downscaling from a big master is far safer than enlarging a small one, and a single large file can feed every product size, from phone cases to posters. Keep a layered master, export lossless, and treat each print-on-demand upload as a derivative of that master, not as the master itself.