How to Enable Pressure Sensitivity in Procreate
StyleFrame Team8 min read
Pressure sensitivity in Procreate works automatically once a pressure-capable stylus, such as an Apple Pencil, is connected to your iPad. There is no master on/off switch. You adjust it in two places: the global curve at Actions (wrench icon) → Prefs → Pressure and Smoothing, and each brush's own response in Brush Studio → Apple Pencil → Pressure. If lines don't react to pressure, the usual culprits are an unsupported stylus, a flattened pressure curve, or a brush with its pressure sliders set to zero.
What "enabling" pressure sensitivity actually means
Many people search for a toggle that doesn't exist. Procreate reads pressure from the stylus the moment it's paired, and each brush decides what to do with that data: change size, change opacity, taper at the stroke ends, or nothing at all.
Two layers control the result:
- The global pressure curve remaps how hard you press to how strongly Procreate responds. It affects every brush.
- Per-brush pressure settings decide which properties (size, opacity, and so on) respond to that pressure, and by how much.
Once you separate these two layers, most pressure problems are easy to diagnose. A brush that ignores pressure is usually a brush-level problem. If every brush feels stiff or too heavy, check the global curve.
Step 1: Confirm your hardware supports pressure
Check this first, because no software setting fixes a stylus that doesn't send pressure data.
- Apple Pencil (2nd generation or Pro): supports pressure. Attach it magnetically to the iPad and wait for the pairing dialog, which also shows battery level.
- USB-C Apple Pencil: reported to support tilt but not pressure. If you're buying one for illustration or animation work, compare specs first.
- Generic capacitive styluses: these usually don't provide pressure. Procreate needs a supported smart stylus that connects to the iPad and reports pressure and tilt.
If you need to pair manually, swipe down from the top right to open Control Center, switch Bluetooth on, then attach the Pencil. Fully charge it as well, since a low battery can cause poor response.
Step 2: Check the global pressure curve
Open any canvas. The preferences menu is only reachable from inside a canvas, though the settings apply across the whole app.
- Tap Actions (the wrench icon).
- Go to Prefs.
- Tap Pressure and Smoothing.
You'll see a graph. The X axis is the pressure you apply, from none on the left to maximum on the right. The Y axis is the effect on your brushes, from none at the bottom to maximum at the top. The default is a straight diagonal line.
Reshape the curve to match your hand
- Light touch isn't registering well? Tap the middle of the line to add a node and raise it slightly. The same pressure now produces a stronger effect, so marks appear sooner. Steepening the start of the curve is especially useful for pencil-style sketching, where you want mid-tones without pressing hard.
- Brushes too sensitive? Lower the middle node so you need to press harder for the same result.
- Fast strokes feel unreliable? Fast inking on an iPad can feel less consistent than on a dedicated pen display. Nudging the bottom node to the right a little at a time can help, so very light contact is ignored.
Procreate's own documentation advises against changing global pressure settings unless you need to, because the default brushes are designed around the default curve. Make small adjustments and test with each one.
Reset if it gets worse
Go back to Prefs → Pressure and Smoothing, scroll down, tap Reset all, and confirm. This restores the default curve and the smoothing values on that page.
Step 3: Set pressure behavior per brush
If the global curve is fine but a particular brush ignores pressure, open Brush Studio by tapping the brush in your library.
- Select the Apple Pencil section.
- Under Pressure, adjust the Size and Opacity sliders.
- Test on the canvas pad and adjust again.
Raising Size makes the line thicker as you press harder. Sliding it into negative values inverts the behavior, so lighter pressure gives thicker lines and heavier pressure gives thinner ones. That's useful for stylized effects that a physical brush couldn't produce.
Use Taper for natural line endings
Still in the Apple Pencil section, the Taper settings control how a stroke thins at the start and end. If your strokes look blunt even though pressure works, taper is often the cause. Linking the start and end tapers keeps them symmetrical. Increasing the distance to the first node makes the transition from thin to thick more gradual.
Pressure applies to more than size
Opacity and other dynamics can also respond to pressure. Some artists keep opacity pressure low and rely on size alone. That's a style preference, not a rule.
Troubleshooting: when pressure still doesn't work
Work through these in order. Each step rules out one layer.
- Test in another app. Draw in Notes or a different drawing app. If pressure works there, the stylus is fine and the problem is inside Procreate. If it doesn't, suspect hardware or compatibility.
- Check the tip. Make sure it's screwed in tightly. A worn tip can feel unresponsive, and replacing it often restores accuracy.
- Re-pair the Pencil. Unpair it in Settings → Bluetooth, pair it again, then restart the iPad.
- Reset the brush. Open Brush Studio, scroll to About this brush, and tap Reset Brush. This clears accidental setting changes.
- Test with a default brush built for pressure. Tinderbox in the Inking set is a good diagnostic because it shows pressure variation clearly.
- Inspect the global curve. A flattened or heavily modified curve can make every brush look unresponsive. Use Reset all.
- Update. Install the latest Procreate and iPadOS versions, then relaunch.
The "thick but can't thin out again" problem
One common complaint is a stroke that gets thicker as you press harder but won't thin again when you ease off. Before blaming the device, check the brush's taper and softness settings. Users report that disabling size taper or softness often makes the response far more even. Also check whether your curve is steep enough that a moderate press already reaches maximum effect, which leaves no room to go lighter.
How to turn pressure sensitivity off
Sometimes you want a constant line width for technical shapes, mattes, or hard-edged outlines. Procreate has no one-tap disable, but there are two workarounds:
- Flatten the global curve. In Prefs → Pressure and Smoothing, drag the top-right dot to the top left of the graph. Size and opacity then depend on your brush size slider and settings rather than pressure. Restore the diagonal or tap Reset all to undo it.
- Make a pressure-free brush. Duplicate a brush and set the Pressure sliders in its Apple Pencil section to zero. This leaves the rest of the app untouched, so you can switch between pressure and non-pressure tools freely. Custom brushes also keep your settings when default brushes change in an update.
Why this matters for motion and VFX work
Motion designers, animators, and compositors can use Procreate for storyboards, style frames, rough animation passes, and hand-drawn elements such as mattes, textures, and ink overlays. Consistent pressure behavior matters here because line weight carries across frames. If your curve drifts between sessions, your frames won't match. Once you've found settings you like, keep one dedicated brush set, and note your curve adjustments so you can recreate them after a reset.
For frame-by-frame work, a custom brush with stable pressure and taper settings usually beats the defaults. For flat color fills and clean shape work, a pressure-free duplicate saves cleanup later.
Taking Procreate artwork into a motion pipeline
Procreate is primarily a drawing tool, so the finished artwork usually moves into your main stack. Export stills or sequences, then bring them into After Effects, Nuke, or Cinema 4D for layout, compositing, and finishing. Your pressure-tuned linework stays the creative source, and the compositing workflow you already trust stays in place.
Quick reference
Final checklist
- Use a pressure-capable stylus, and confirm that your Apple Pencil model supports pressure.
- Make small changes to the global curve and test after each one.
- Tune size, opacity, and taper in Brush Studio rather than relying on the curve alone.
- Reset the brush or the curve before assuming something is broken.
- Save a custom brush with pressure behavior you trust, especially for multi-frame work.
Once your pressure settings feel natural, you can stop thinking about them and focus on the frames themselves.