How to Edit Text Color in Procreate
StyleFrame Team8 min read
To edit text color in Procreate, select the text layer, tap the text on the canvas, double-tap a word, choose Select All, then pick a new color from the color circle in the top-right corner. This only works while the layer is still live text, which shows a small "A" in the Layers panel. Once the text is rasterized, you recolor it with Color Drop or a clipping mask instead.
Change the Color of Editable Text
Procreate treats text as a vector layer until you convert it. While it stays editable, you can change color, font, spelling, and spacing at any time.
- Select the text layer in the Layers panel.
- Tap the text on the canvas with your Apple Pencil or finger. This opens the Edit Style panel at the bottom of the screen. You can also tap the selected layer again and choose Edit Text from Layer Options.
- Double-tap a word to select it, then tap Select All to highlight the whole block.
- Tap the color circle in the top-right corner.
- Choose a color from the Disc, Classic, Harmony, Value, or Palettes tabs.
- Tap Done to apply your changes, or Cancel to discard them.
The Edit Style panel is organized into Font, Style, Design, and Attributes. Color isn't inside it. It lives in the main color picker, which is why many people look in the wrong place.
Why Text Color Won't Change in Procreate
If you tap a new color and nothing happens, one of these is usually the cause.
You selected the layer but not the text
This is the most common mistake. Highlighting a text layer in the Layers panel doesn't mean the text inside it is selected. You have to be in edit mode, with the words highlighted, before a color change applies.
You changed the color after the text was created
Procreate applies the active color to text as you create it. If you pick a color first and then add a new text layer, the text appears in that color. If you open an existing text layer, the color picker shows the text's current color rather than recoloring it. Selecting the text and then choosing a color is what triggers the change.
The layer has been rasterized
If the "A" icon is gone from the layer in the Layers panel, the text is now pixels. Color picker changes won't affect it, and you can't edit spelling or font either. You need one of the pixel-based methods below.
Only part of the text is highlighted
Color changes apply to the highlighted selection. If you only double-tapped one word, the rest keeps its old color. That's useful when you want mixed colors in one layer, and a surprise when you don't.
Color Individual Words or Letters
Because color applies to whatever is highlighted, you can build multicolor text inside a single editable layer.
- Enter edit mode and double-tap a word to select it.
- Drag the selection handles to include only certain letters if needed.
- Open the color circle and choose a color.
- Repeat for each section.
This keeps every part of the layer editable, so you can still fix a typo or swap the font later. It works well for title cards, lower thirds, and logo lockups where one word needs an accent color.
Recolor Rasterized Text
Rasterizing converts live text into a regular pixel layer. Procreate rasterizes text when you choose Rasterize from Layer Options. After that, there are two reliable ways to change its color.
Method 1: Color Drop
- Select the rasterized text layer.
- Drag from the color circle and drop it onto the letters.
- Before releasing, hold your finger or Pencil still and slide left or right to adjust the fill threshold.
Threshold matters for anti-aliased edges. If it's too low, you'll get a faint fringe of the old color around each letter. Raise it until the edge pixels are covered.
Method 2: Clipping Mask
- Add a new layer directly above the text layer.
- Tap the new layer and choose Clipping Mask.
- Fill or paint on the new layer.
The color only appears where the text underneath has pixels. This is the better of the two because the original text layer stays untouched.
Keep Text Color Non-Destructive
Rasterizing is one-way, so protect yourself before you do it.
- Duplicate the text layer first. Hide the copy and keep it as a live backup you can recolor later.
- Use clipping masks for color. Put solid fills, gradients, and patterns on clipped layers above the text. To change the look, edit or replace the clipped layer.
- Try blend modes on the clipped layer. Different blend modes give very different results from the same base text without altering the original.
- Name your layers. "Title – live text" and "Title – raster" save time when a project comes back with revisions.
Apply Gradients and Patterns to Text
Procreate's color picker applies one flat color to live text. For gradients or patterns, you need a pixel layer or a clip.
- Rasterize a duplicate of your text layer, or keep a spare live copy hidden.
- Add a new layer above it and set it as a clipping mask.
- Fill it with a gradient, painted texture, or pattern.
- Adjust the clipped layer's blend mode and opacity.
If you change your mind about the wording, you'll have to re-create the raster from the live copy. That's why keeping the hidden editable version is worth the extra layer.
Change Text Opacity Without Changing Color
If you only need a lighter version of the same color, use the Opacity slider in the Design section of the Edit Style panel instead of picking a new swatch. This leaves the hue unchanged and keeps the text editable. Remember that this fades the text itself, not the layer, so check how it behaves against your background.
Getting Procreate Text Color Into a Motion Pipeline
Many motion designers, animators, and video editors use Procreate for lettering, titles, concept art, or style frames, then finish elsewhere. A few habits make that handoff smoother.
- Finalize color before export. Rasterized, clipped, and blended layers export as pixels. Check your color on the canvas before you flatten or export.
- Export with transparency. Hide the background layer before exporting so you get a transparent file, and keep your layers separate if your compositing app supports it.
- Keep a live-text master. If a client wants a different color or a typo fixed, you'll want the editable Procreate file, not just a PNG.
- Work at the final resolution. Set your canvas size to match the delivery frame, or larger, so lettering stays crisp when scaled in a comp.
Procreate is a raster painting app, so it won't give you the animatable text properties you get in After Effects. Use it for the hand-drawn or painterly parts of the look, and do the animation and final type treatment in your compositor.
Where Styleframe Fits After Procreate
Once your lettering or illustration is colored the way you want, the next challenge is often turning that still into moving footage without losing the look. is an AI video and motion tool built for artistic control rather than one-click output. Every generation is driven by your own reference images, video clips, and keyframes.
A practical way to use it with Procreate work:
- Frames-to-Video: Export a start and end frame from Procreate, such as a title in two color states or a painted scene at two moments, and use them as keyframes to generate the motion between them.
- Restyle and Ink-and-Paint: Use your Procreate artwork as the style reference so footage picks up your palette and line quality through reference-driven style transfer.
- Remove Background and 4K Upscale: Isolate a subject or bring lower-resolution art up to production-ready 4K.
- 2D-to-3D and Turntable: Turn a flat character or object drawing into a 3D asset and generate a rotating view for reference or compositing.
Iteration is non-destructive, so you can try several variations without overwriting earlier ones. Styleframe exports image sequences, so the results drop into your existing After Effects or Nuke compositing workflow. It doesn't replace your type tools or your comp. It extends what you can do with the stills you've already built.
Quick Troubleshooting Checklist
- Color won't change: Make sure the text itself is highlighted, not just the layer.
- No "A" in the layer: The text is rasterized, so use Color Drop or a clipping mask.
- Old color fringe after Color Drop: Raise the fill threshold while holding the drop.
- Only part of the text changed: Select all the text before choosing a color.
- Need a gradient: Use a clipped layer above the text rather than the color picker.
FAQ
Can I change text color after I've added the text? Yes, as long as it's still live text. Enter edit mode, select the text, and pick a new color.
Why does the color picker show the old color when I edit text? It displays the current color of the selected text. Choose a different color after highlighting the text to apply it.
Can I recolor text after rasterizing it? Yes, but not through the text tools. Use Color Drop or a clipping mask.
What's the best non-destructive way to color text? Keep a live-text copy and add color on clipped layers above it. That gives you gradients, patterns, and blend modes without losing editability.