How to Edit Existing Text in Procreate
StyleFrame Team8 min read
To edit existing text in Procreate, select the text layer in the Layers panel and tap it again to open Layer Options, then choose Edit Text. You can also double-tap the text on the canvas. This opens the Edit Style panel, where you can change font, style, size, kerning, tracking, leading, baseline, opacity, and alignment. If Edit Text is missing, the layer has most likely been rasterized.
Quick Steps to Edit Text in Procreate
- Open the Layers panel and tap the text layer so it's highlighted.
- Tap the same layer a second time to open Layer Options, then tap Edit Text. Alternatively, double-tap the text on the canvas.
- A cursor and the system keyboard appear. Retype, delete, or add characters.
- To restyle, highlight the text (triple-tap works) and tap the font label in the small menu that appears above it. The full Edit Style panel opens at the bottom of the screen.
- Tap Done to apply your changes or Cancel to discard them.
Procreate's text tool is less discoverable than the type tools in After Effects or Photoshop. There's no dedicated tool you click to re-enter a text box. Everything runs through the layer, so the layer's state decides whether editing is possible at all.
Three Ways Back Into a Text Layer
Procreate offers several entry points, and which one is fastest depends on how cluttered your canvas is.
Double-tap the text on canvas
On a clean canvas, double-tapping the text puts you in edit mode. It's the fastest route, but it can misfire when other layers overlap the type or when a different layer is currently active.
Use the Layers panel and Layer Options
This is the most reliable method. Select the text layer so it's your active layer, then tap it again to bring up Layer Options and choose Edit Text. Because you're targeting the layer directly, you avoid accidentally grabbing artwork underneath. On dense boards with dozens of layers, this is the method to default to.
Select, close the panel, then highlight
Another route is to tap the text layer in the Layers panel and close the panel. The text then becomes active with a blinking cursor and keyboard. At that point the style controls may still be hidden. Triple-tap to highlight the text, and a small contextual menu appears above it. Tap the font label in that menu to bring up the full Edit Style panel.
What You Can Change in the Edit Style Panel
The Edit Style panel is organized into four areas. Knowing what lives where saves hunting through menus mid-session.
Font and Style
The Font list shows every installed typeface, with each name rendered in its own design so you can preview as you scroll. Tapping a font applies it immediately. The Style section lists the variants available for that family, such as regular, italic, bold, or ultralight and black weights. Not every font ships with multiple styles, so a family showing only one or two options is normal rather than a bug.
Design sliders
The Design section has six sliders:
- Size: Scales the type within the text box. The box keeps its width and adjusts its height.
- Kerning: Adjusts spacing between specific letter pairs.
- Tracking: Adjusts spacing across every character in the block.
- Leading: Adjusts the distance between lines.
- Baseline: Shifts the line the text sits on within its box.
- Opacity: Controls transparency of the text.
Attributes
Attributes covers paragraph alignment (left, center, right, justified), underline, an outline effect, and an all-caps toggle. The caps toggle is non-destructive. Turning it off restores your original capitalization, so you can test an all-caps treatment without retyping.
Why You Can't Edit Your Text: Rasterization
The most common reason people can't edit text in Procreate is that the layer is no longer text. A live text layer displays an A icon as its thumbnail. A rasterized layer shows a thumbnail of the actual pixels instead. Once a layer is raster, there's no Edit Text option, and tapping it with Pencil or finger won't bring up a keyboard.
Rasterization can happen when you:
- Copy and paste a text layer, which flattens it into pixels.
If you've rasterized by accident, undo immediately if you can. If you've kept working past that point, the practical fix is to retype the text on a new text layer and match the old styling by eye. Keep the rasterized version underneath at reduced opacity as a reference while you match font, size, and spacing.
Duplicating Text the Right Way
A related trap involves repeating a text style. Copy and paste turns the text into pixels, so it stops being editable. Instead, duplicate the layer. A duplicated text layer remains live, carries over font, size, and spacing, and can be edited independently. Then open it with Edit Text and replace the words.
Two related constraints are worth remembering:
- Each text box needs its own layer. You can't place multiple separate text boxes within a single text layer.
- If you need several lines with identical styling, duplicate once per instance rather than trying to share a layer.
For styleframes with a consistent type system, such as a title, subtitle, and credit line, set up one correctly styled layer, duplicate it, and edit each copy. This keeps your typography consistent across boards.
When the Edit Style Option Disappears
Occasionally the Edit Style button vanishes entirely, leaving you with a keyboard but no font or sizing controls. In some Procreate 4.3-era setups, this was traced to a keyboard setting that got switched off during an iPad OS update. The fix reported for that situation was to open the iPad Settings app, go to General > Keyboard, and turn Shortcuts back on.
Newer versions of Procreate may behave differently, so treat this as a fallback. Before changing system settings, confirm that:
- You're on a live text layer (check for the A thumbnail).
- You've highlighted the text and tapped the font label in the contextual menu.
- You haven't accidentally tapped off the text, which closes the Edit Style panel automatically.
Remember that the panel closes when you tap away or begin editing another layer. If it vanishes mid-session, reselect the text layer and reopen it.
Keeping Text Editable Through a Motion Workflow
For motion designers and video editors, Procreate often serves as a concept stage: a styleframe, a mood board, or a hand-drawn title treatment that will eventually be rebuilt in After Effects, Premiere Pro, Cinema 4D, or Blender. A few habits keep that handoff clean.
Leave type live as long as possible. Treat text in Procreate like a placeholder until the layout is approved. Rasterizing early locks you out of copy changes, and clients revise copy often.
Keep a reference export with the text visible and another without it. Hide text layers and export an artwork-only version. That gives you a clean plate for compositing and lets you rebuild the type as native text in your compositing app.
Record your type specs. Procreate won't hand you a tidy spec sheet, so note the font, size, tracking, and leading while the layer is still editable. You'll need them when rebuilding the type in your compositing app.
Name your layers. Text layers show an A thumbnail but not their content at a glance. Naming them "Title," "Subhead," and so on speeds up editing on busy boards.
Where Styleframe Fits After the Type Is Locked
Styleframe doesn't edit Procreate text, and it isn't a substitute for Procreate's type tools. Where it helps is the next step: taking an approved board into motion while keeping you in control of the look.
Styleframe is an AI video and motion tool. A typical handoff might look like this:
- Finalize the board in Procreate, with copy and type styling approved.
- Export the artwork without the live text, or with it if the type is part of the visual style you want to explore.
- Use the artwork as a reference in Styleframe to explore motion and style.
- Bring the results into your compositing app, such as After Effects, for final compositing.
One practical caution applies. Generative tools can alter letterforms, so rebuild final type as live text in your compositing app rather than relying on generated pixels to hold fine typography. Using Styleframe for the imagery and motion, and After Effects for the type, gives you sharp, editable text over stylized footage.
Troubleshooting Checklist
If you still can't edit your text, run through this list:
- Check the thumbnail. An A means live text; pixel content means rasterized.
- Select the layer first. Make the text layer active before tapping it again for Layer Options.
- Look for Edit Text in Layer Options. If it's missing, the layer is likely raster.
- Tap the font label after highlighting. This reopens the full Edit Style panel.
- Duplicate, don't copy. Use layer duplication to repeat styled text.
- Check the keyboard Shortcuts setting on older setups if the style controls don't appear.
- Update Procreate. Text behavior has changed between versions, so confirm you're following steps that match your build.
Final Thoughts
Editing existing text in Procreate comes down to one question: is the layer still live text? If yes, select it, tap again, choose Edit Text, and use the Edit Style panel to adjust anything from font to baseline. If not, retype on a fresh layer and protect future edits by duplicating layers instead of copying and pasting. For motion work, keep type live as long as you can, document your specs, and rebuild final text natively in your compositing app so it stays sharp and flexible through every client revision.