How to Draw with Logi Pencil on Procreate
StyleFrame Team7 min read
This guide assumes "Logi Pencil" means the Logitech Crayon, which works in Procreate because it's built on Apple Pencil technology and needs no pairing. Press the power button until the LED lights, open Procreate, and draw on a canvas. Tilt the tip to vary line weight, and rest your palm on the screen as you would on paper. Check your iPad model first, because Logitech's own documents disagree on which iPads the Crayon supports.
What You Need Before You Start
- A Logitech Crayon, charged, with its tip screwed on firmly.
- A compatible iPad running current iPadOS (Logitech's troubleshooting guide cites iOS 11.4 or later as a minimum).
- Procreate installed.
Check compatibility carefully. Logitech's Crayon feature page lists "all iPad 2018 and above," while its troubleshooting PDF says the Crayon works only with the 6th-generation iPad (model numbers A1893 or A1954). Those sources conflict. Before buying or debugging, confirm your iPad model against Logitech's current compatibility list. If you own a newer iPad and the Crayon does nothing, this is the first thing to rule out.
Step 1: Turn On the Crayon
The Crayon doesn't use Bluetooth pairing with the iPad.
- Press and hold the power button for about one second until the LED comes on.
- Tap the button briefly at any time to check the battery. Green means above 10%, red means below 10%, and blinking red means charge it immediately.
- Start drawing. The iPad treats it like an Apple Pencil.
If you've been using a real Apple Pencil on the same iPad, Logitech says to disconnect it first. Go to Settings → Bluetooth, find the Apple Pencil, and choose Forget This Device. Otherwise the Crayon may not register.
Two battery details matter for long sessions. Logitech quotes up to about 7 to 7.5 hours of continuous use per charge, and the Crayon powers itself off after 30 minutes idle. It also can't be used while it's charging over Lightning, and a full charge from empty takes around 50 minutes. If you're mid-sketch and it dies, a short charge boost helps, but you'll still have to wait.
Step 2: Set Up a Canvas in Procreate
You don't need to connect anything inside Procreate. As Procreate's handbook puts it for Apple Pencil, you open the app and draw.
- Open Procreate and tap + in the Gallery to create a new canvas.
- Choose a size. For work headed into After Effects, pick the dimensions of your composition (for example 3840×2160 for UHD) so you don't resample later. Large canvases cost layers, so check the layer count Procreate offers at that size.
- Open the Layers panel and add a fresh layer above the background. Keep sketching, inking, and color on separate layers so you can adjust or hide them without redrawing.
Step 3: Pick a Brush and Dial In Its Settings
Tap the paintbrush icon to open the Brush Library. For clean, predictable lines while you get used to the Crayon, start with Monoline in the Calligraphy set. It gives even strokes and is forgiving. Move on to textured or sketching brushes once your hand is comfortable.
Then adjust the sliders on the left side of the canvas:
- Top slider: brush size. Use a small size with high opacity for linework.
- Bottom slider: opacity. Drop it for loose underdrawing.
Know What the Crayon Reports to Procreate
This is where the Crayon differs from an Apple Pencil. Procreate brushes can respond to pressure, tilt, and rotation, and Procreate's handbook describes tying brush size to pressure and opacity to tilt. Logitech's Crayon specs, however, list tilt sensitivity and palm rejection, with no mention of pressure sensitivity. In practice, expect tilt-driven line weight to be the main dynamic. Brushes whose character depends on pressure may feel flat, so don't be surprised if a calligraphy or inking brush doesn't taper the way it does in tutorials made with an Apple Pencil.
Two other Apple Pencil features from Procreate's handbook are tied to specific hardware:
- Double-tap shortcut: this is documented for the 2nd-generation Apple Pencil. Don't plan your workflow around it with a Crayon.
- Apple Pencil Pro gestures like squeeze and barrel roll won't apply either.
If a brush feels off, you can still experiment with Procreate's App Pressure Sensitivity curve and with tilt mappings in Brush Studio. Test, don't assume.
Step 4: Draw Your First Lines
With the setup done, here's how to get usable results quickly.
Use Tilt for Line Weight
Change the angle you hold the Crayon at to get thinner or thicker lines. Logitech designed the tip to behave like a pencil in this respect. It's the quickest way to get shading and variation without touching the size slider.
Rest Your Palm
Palm rejection comes from iPad itself. You can rest your hand on the screen while drawing. If you get stray marks, check that you aren't using a glove or that the Crayon isn't being treated as a second input.
Draw Clean Shapes with QuickShape
Draw a circle, line, or rectangle in one stroke and hold the tip at the end. Procreate snaps it into a clean shape, and you can tap Edit Shape to adjust it. This works well for boards with UI frames, product shapes, and geometric motion graphics layouts.
Trace a Reference
A reliable way to build confidence is to insert a photo or frame and draw over it:
- Tap the wrench icon, choose Add → Insert a photo.
- Open Layers and add a new empty layer above the photo.
- Tap the N on the photo layer and lower its opacity to around 50%.
- Select the empty layer and draw over the reference.
Motion designers can use the same method to trace over a screenshot of a comp, a 3D render from Cinema 4D or Blender, or a frame exported from Premiere Pro. Rotoscoping-style tracing for stylized key poses works well this way.
Zoom and Navigate
Pinch with two fingers to zoom in on detail. Because the Crayon behaves like a finger-precise stylus, zoomed-in work on eyes, hands, or logo details is where its pixel-level accuracy pays off.
Common Problems and Fixes
- Nothing happens when I draw: confirm the LED is on, the battery isn't red, and the tip is tight. Then re-check iPad compatibility and forget any paired Apple Pencil in Bluetooth settings.
- It works in some apps and not others: Logitech says the Crayon works with apps that support Apple Pencil. Procreate does, but a tool that's unsupported in some other app will simply not respond.
- Finger touches stop working in a note-taking app: that's the app's pencil-only mode, not Procreate. Turn it off in that app's settings.
- Worn or damaged tip: replacement tips are sold separately by Logitech, and the pack includes a removal tool.
- Lines look uniform: that's likely the missing pressure data. Switch to a brush that relies on tilt, or increase size variation via tilt in Brush Studio.
Is the Crayon Enough for Professional Work?
For storyboards, animatic sketches, style exploration, and rough character poses, yes. It's durable and quick to start. For finished illustration with detailed pressure-driven inking, an Apple Pencil gives Procreate more input to work with. If your work is mostly planning and ideation before you move into After Effects, the Crayon is a reasonable and low-risk tool.
From Procreate Sketch to Motion Pipeline
Most motion designers don't deliver the drawing itself. The sketch is a starting point for animation, 3D, or a comp. A practical flow:
- Draw key poses, a style frame, or a storyboard panel in Procreate with each element on its own layer.
- Export your layered work from Procreate and bring it into After Effects, Premiere Pro, or a Nuke script as a reference or a layered source.
- Build motion, compositing, and color there as usual.
If you want to take a drawing further, is one AI video and motion tool you could look at. Check its site for what it supports. The drawing stays yours either way.
Quick Recap
- Confirm your iPad supports the Crayon.
- Hold the power button for about a second, check the green LED, and open Procreate.
- Make a canvas at your target resolution and use separate layers.
- Start with Monoline, then use tilt for line weight.
- Use QuickShape and photo tracing to speed up layouts.
- Don't expect pressure or double-tap features.
- Export layered files to After Effects, or try extending your drawings with a tool like Styleframe.